2009 Chevrolet Exhaust Parts
Choose a Model for your 2009 Chevrolet
Image
Product
Price
- Exhaust Manifold Gasket Set
- FEL-PRO MS 95842 Exhaust Manifold Gasket Set for Chevrolet S10
- Product Attributes:
- Grade Type: Premium
-
Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Contains all gaskets and seals to remove and replace exhaust manifold
- Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
This Part Fits the Following OEM/Substitute Numbers:
111082901, 12529193, 18673, 18675, 799359, MS12407, MS15251
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2009 - Chevrolet Silverado 1500 | V | - | 6 Cyl 4.3L | 262 |
- 12 Pcs
- Hex Head 3/8 dia. X 3/4in Black Oxide
- Fits GM V6, SB 265-400, Buick, Olds, Pontiac '79 and earlier, Mopar BB 383-440 exc 413, AMC V8's w 3/8" bolts
- Product Attributes:
- Bolt Grade: 8
- Diameter: 3/8-in.
- Category: Header Bolts
- Feature/Benefit: Wedge-locking Technology Eliminates Constantly Re-tightening Exhaust Collector Bolts; Blocks Bolt-loosening Rotation Caused By Vehicle Vibrations.
- Length: 3/4 Inch
- Applications: Fits Gm V6, Sb 265-400, Buick, Olds, Pontiac 79 And Earlier, Mopar Bb 383-440 Exc 413, Amc V8's W 3/8in Bolts
- Part Type: Header Bolts
- Thread Type: Fine
- Head Drive Type: Hex
- Material: Steel
- Finish: Black Oxide
- PROFORM Wedge-Locking Header Bolts ELIMINATE the need to constantly re-tighten collector bolts, and without the need for clips, pins, racing-wire, chemicals or gunk. The secret is in the Wedge-Locking Washer's super-hardened external teeth that "bite" into the bottom of the bolt head and the top flange surface. Vibrations that normally cause other bolts to loosen, are blocked by the wedge-locking action that uses tension, instead of friction to stay snug. In fact, contact with oil actually facilitates the effect. Installs/uninstalls with a normal wrench, lubricate, and then reuse. Each set comes with twelve Hex Head, Grade 8 (12.9) steel bolts (3/8"-16 thread, 3/4" long) with a black oxide finish, and pre-assembled Wedge-Locking Washers.
-
Suggested Purchase Quantity: 12
- Most jobs typically require 12 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2009 - Chevrolet Silverado 1500 | V | - | 6 Cyl 4.3L | 262 |
- Direct-Fit Catalytic Converter
- CARB Executive Order D-193-143 Engine Family Number 9GMXT06.0392 ; Certification Level : LEV2 LEV OE Spec Cutting and Welding Required During Installation
- Direct-Fit Catalytic Converter
- 2.50in. Universal California OBDII Catalytic Converter
- Product Attributes:
- Inlet Attachment: Weld-on
- Inlet Orientation: Straight
- Outlet Orientation: Straight
- Inlet Diameter: 2.5
- Outlet Attachment: Weld-on
- Sensor Port Count: 0
- Body Width: 4
- Body Type: Spun
- Body Height: 4
- Subtitle: California / Carb Compliant
- Substrate Material: Ceramic
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2009 - Chevrolet Tahoe | V | 5967 | Right | 8 Cyl 6.0L | 364 |
- Universal Catalytic Converter - 2.25in.
- CARB Executive Order D-193-133 Engine Family Number 9GMXV02.4033 ; Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
- Universal Catalytic Converter - 2.25in.
- 2.25in. Universal California OBDII Catalytic Converter
- Product Attributes:
- Inlet Attachment: Weld-on
- Inlet Orientation: Straight
- Outlet Orientation: Straight
- Inlet Diameter: 2.25
- Outlet Attachment: Weld-on
- Sensor Port Count: 0
- Body Width: 4
- Body Type: Spun
- Body Height: 4
- Subtitle: California / Carb Compliant
- Substrate Material: Ceramic
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Position | Engine | CID |
|---|---|---|---|---|---|---|
| 2009 - Chevrolet HHR | L | 2384 | Manual | Front | 4 Cyl 2.4L | 145 |
- Universal Catalytic Converter - 2.25in.
- CARB Executive Order D-193-133 Engine Family Number 9GMXV03.5045 ; Certification Level : LEV2 ULEV OE Spec Excluding Partial Zero Emissions Vehicles (PZEV) Cutting and Welding Required During Installation
- Universal Catalytic Converter - 2.25in.
- 2.25in. Universal California OBDII Catalytic Converter
- Product Attributes:
- Inlet Attachment: Weld-on
- Inlet Orientation: Straight
- Outlet Orientation: Straight
- Inlet Diameter: 2.25
- Outlet Attachment: Weld-on
- Sensor Port Count: 0
- Body Width: 4
- Body Type: Spun
- Body Height: 4
- Subtitle: California / Carb Compliant
- Substrate Material: Ceramic
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2009 - Chevrolet Malibu | V | 3490 | Front Left | 6 Cyl 3.5L | 213 |
- Direct-Fit Catalytic Converter
- CARB Executive Order D-193-143 Engine Family Number 9GMXT06.0392 ; Certification Level : LEV2 LEV OE Spec Cutting and Welding Required During Installation
- Direct-Fit Catalytic Converter
- 2.50in. Universal California OBDII Catalytic Converter
- Product Attributes:
- Inlet Attachment: Weld-on
- Inlet Orientation: Straight
- Outlet Orientation: Straight
- Inlet Diameter: 2.5
- Outlet Attachment: Weld-on
- Sensor Port Count: 0
- Body Width: 4
- Body Type: Spun
- Body Height: 4
- Subtitle: California / Carb Compliant
- Substrate Material: Ceramic
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2009 - Chevrolet Tahoe | V | 5967 | Left | 8 Cyl 6.0L | 364 |
- Direct-Fit Catalytic Converter
- CARB Executive Order D-193-143 Engine Family Number 9GMXT06.0387 ; Certification Level : LEV2 LEV OE Spec Cutting and Welding Required During Installation
- Direct-Fit Catalytic Converter
- 2.50in. Universal California OBDII Catalytic Converter
- Product Attributes:
- Inlet Attachment: Weld-on
- Inlet Orientation: Straight
- Outlet Orientation: Straight
- Inlet Diameter: 2.5
- Outlet Attachment: Weld-on
- Sensor Port Count: 0
- Body Width: 4
- Body Type: Spun
- Body Height: 4
- Subtitle: California / Carb Compliant
- Substrate Material: Ceramic
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2009 - Chevrolet Trailblazer | V | 5967 | Left | 8 Cyl 6.0L | SS | 364 |
- Direct-Fit Catalytic Converter
- CARB Executive Order D-193-143 Engine Family Number 9GMXT06.0387 ; Certification Level : LEV2 LEV OE Spec Cutting and Welding Required During Installation
- Direct-Fit Catalytic Converter
- 2.50in. Universal California OBDII Catalytic Converter
- Product Attributes:
- Inlet Attachment: Weld-on
- Inlet Orientation: Straight
- Outlet Orientation: Straight
- Inlet Diameter: 2.5
- Outlet Attachment: Weld-on
- Sensor Port Count: 0
- Body Width: 4
- Body Type: Spun
- Body Height: 4
- Subtitle: California / Carb Compliant
- Substrate Material: Ceramic
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2009 - Chevrolet Trailblazer | V | 5967 | Right | 8 Cyl 6.0L | SS | 364 |
- Exhaust Pipe Flange Gasket
- FEL-PRO 61323 Exhaust Pipe Flange Gasket for Chevrolet Silverado 1500
- Product Attributes:
- Grade Type: Premium
-
Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
This Part Fits the Following OEM/Substitute Numbers:
15077362, 711362200, 711368100, EG24415, F31731
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2009 - Chevrolet Avalanche | V | 5328 | Manifold To Front Pipe (Left) | 8 Cyl 5.3L | 325 |
- Single Passenger Side Rear Exit
- Street Series Stainless Cat-Back System
- Street Series Stainless Cat-Back System
- Product Attributes:
- Main Piping Diameter: 3
- Muffler Type: Straight-through
- Tip Diameter: 3.5 X 5.5
- Muffler Finish: Satin
- Exit Style: Single Passenger Side Rear
- Tip Length: 8.25
- Tip Type: Welded;double Wall;straight Cut;rolled Edge
- Inlet Connection Type: Clamp-on
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2009 - Chevrolet Tahoe | V | - | 8 Cyl 4.8L | 294 |
Showing 1 - 10 of 482 products
Loading...