2011 Jeep Exhaust Parts
Choose a Model for your 2011 Jeep
Image
Product
Price
- Dual Rear Exit; 2.5 in. Dia.; Single 4.5 in. Slash Dual Walled Black PVD Tip Will Not Fit Vehicles w/Factory Equipped Rear Tow Hook
- Xtreme Cat-Back Exhaust System
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - Jeep Grand Cherokee | V | - | 8 Cyl 5.7L | 345 |
- Exhaust Manifold Gasket; Left;
- Exhaust Manifold Gasket
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm; Http://www.p65warnings.ca.gov/
-
Features:
- Exhaust Manifold Gasket
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2011 - Jeep Grand Cherokee | V | - | Left | 8 Cyl 5.7L | 345 |
- Exhaust Manifold Gasket; Right;
- Exhaust Manifold Gasket
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm; Http://www.p65warnings.ca.gov/
-
Features:
- Exhaust Manifold Gasket
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2011 - Jeep Grand Cherokee | V | - | Right | 8 Cyl 5.7L | 345 |
- Exhaust Manifold Gasket;
- Exhaust Manifold Gasket
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm; Http://www.p65warnings.ca.gov/
-
Features:
- Exhaust Manifold Gasket Set
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle |
|---|
| 2011 - Jeep Wrangler |
- Hardware-Clamp 2 1/4in. Narrow Band-Stain.
- Size 2.25 in.; 430 Bright Stainless Steel Slotting Required On ID Connection For Proper Clamping
- Hardware-Clamp
- Walker Exhaust Band Clamp
- Product Attributes:
- Most Popular Make/Model: Ford Mustang
- Saddle Gauge: 15
- WARNING CA Proposition 65: No
- Saddle Hole Type: Round
- Hardware Material: 430 Stainless Steel
- Class: Hd
- Product Grade: Economy
- Min Year Covered: 2005
- Max Year Covered: 2017
- Most Popular Year: 2007
- Total Part VIO: 1295662
- Diameter (in.): 2.250 In.
- Clamp Type: Band
-
Features:
- Many Different Clamp Designs Available To Meet Your Needs
- Available In Stainless And Aluminized Steel
- Available In Individual Or Bulk Cartons
- Proudly Manufactured In The USA
- Walker(R), with our worldwide OE partnerships and manufacturing facilities, possesses the technical excellence needed to meet today's emissions control needs, while developing solutions for tomorrow's challenges. Walker(R) is a 'one-stop' convenience, offering complete engine-to-tailpipe coverage of replacement emissions control systems and components for popular domestic and import vehicles in broadmarket, performance, and commercial vehicle applications. Walker(R) delivers optimal OE-style fit, appearance, and dependability in aftermarket emissions control parts.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - Jeep Compass | L | 2360 | 4 Cyl 2.4L | 144 |
- DynoMax Ultra-Flo Welded Muffler
- Oval; 2.5 in. Inlet/Outlet; 4.5 in. H x 9.75 in. W x 14 in. Muffler L/19 in. Overall Length; Offset/Offset; Reversible; Stainless Steel Ultra Flo Welded System~w/Single Outlet
- DynoMax Ultra Flo Welded Muffler
- Ultra Flo™ Welded Universal Muffler
- Product Attributes:
- Tip Quantity: 0
- Muffler Overall Length: 19.000 In.
- Muffler Type: Absorption
- Outlet Diameter Designation: Inside Diameter
- Outlet Position: Offset
- WARNING CA Proposition 65: No
- Fitment: Universal
- Outlet Configuration: Offset
- Muffler Body Length: 14.000 In.
- Outlet Quantity: 1
- Max Year Covered: 2018
- Most Popular Year: 2015
- Muffler Body Height: 4.500 In.
- Muffler Body Finish: Bare
- Total Part VIO: 1826144
- Body Length: 14.000 In.
- Inlet Outside Diameter: 2.500 In.
- Inlet Connection Type: Pipe
- Most Popular Make/Model: Jeep Wrangler
- Muffler Outlet Diameter: 2.500 In.
- Automotive Item Grade: High Performance Part
- Outlet Connection Type: Pipe
- Muffler Body Width: 9.750 In.
- Overall Length: 19.000 In.
- Inlet Inside Diameter: 2.500 In.
- Muffler Inlet Diameter: 2.500 In.
- Product Grade: Premium
- Min Year Covered: 2007
- Inlet Diameter Designation: Inside Diameter
- Main Piping Diameter: 2.500 In.
- Shape: Oval
- Inlet Quantity: 1
- Muffler Body Material: Stainless Steel
- Muffler Body Shape: Oval
- Inlet Position: Offset
- Muffler Reversible: Yes
- Outlet Type: Single Offset
-
Features:
- Constructed Using All 409 Stainless Steel
- 100% Welded Construction For Lifelong durability
- Unrestricted Straight-Through Design
- Dyno Proven To Flow Up To 2000 SCFM And Support Up To 2000 HP
- Exclusive Continuous Roving Fiberglass Technology
- CRF Technology Absorbs Unwanted Interior Resonance
- Maintains A Deep Performance Tone
- Straight-Through Design Ensures Unrestricted Exhaust Flow
- Reduces Back pressure
- Proudly Manufactured In The USA
- Limited Lifetime Warranty
- DynoMax(R) Ultra Flo(TM) Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler uses our exclusive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone. The 'Pure Unadulterated POWER' of DynoMax(R) Ultra Flo(TM) Welded mufflers are backed by a Limited Lifetime Warranty and exclusive 90-Day Performance & Sound Guarantee(TM).
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - Jeep Wrangler | V | 3778 | 6 Cyl 3.8L | 231 |
- Hardware-Mega Clamp 2 1/2in. Lap-Stain.
- Lap Joint; 2.5 in.; Connects OD/ID Pipes; T-304 Stainless Steel Ultra Flo Stainless Steel System~w/Dual Outlets~2 1/2 in. Band
- Hardware-Clamp
- Walker Mega-Clamp Band Clamp
- Product Attributes:
- Most Popular Make/Model: Chevrolet Silverado 1500
- Nut Type: Hex
- Saddle Gauge: 25
- WARNING CA Proposition 65: No
- Saddle Hole Type: Round
- Hardware Material: Stainless Steel
- Class: Ha
- Product Grade: Economy
- Min Year Covered: 1983
- Max Year Covered: 2020
- Most Popular Year: 2007
- Total Part VIO: 19287673
- Diameter (in.): 2.500 In.
- Clamp Type: Band Clamp - Lap Joint
-
Features:
- Many Different Clamp Designs Available To Meet Your Needs
- Available In Stainless And Aluminized Steel
- Available In Individual Or Bulk Cartons
- Proudly Manufactured In The USA
- The Walker(R) Mega-Clamp(R) combines state-of-the-art Walker engineering with quality manufacturing. Available in a wide range of styles, sizes, and materials, including stainless steel and aluminized steel. Walker has a Mega-Clamp to meet your heavy-duty needs.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2011 - Jeep Wrangler | V | 3778 | 6 Cyl 3.8L | Unlimited 70th Anniversary | 231 |
- For Stock Or Aftermarket Headers; Sold In Pair
- Premium Header Gasket Set; For Stock Or Aftermarket Headers; Sold In Pair;
- Premium Header Gasket Set
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Which Are Known To The State Of California To Cause Cancer And Birth Defects; Or Other Reproductive Harm (for A List Of Chemicals And More Information Go To Www.p65warnings.ca.gov)
- Port Shape: Round
- Product Grade: Performance
-
Features:
- Premium Gasket Material Ensures Leak Free Seal
- Fits All Stock and Most Aftermarket Applications
- Port Matched For Optimum Flow Of All Exhaust Headers
- Designed For Higher Temperature
- Sold As A Pair
- BBK Is Your Number One Aftermarket Performance Brand In The USA
- These BBK Premium Quality Exhaust Header Gasket Sets Are Designed To Give You a Quality Long Lasting Seal. Will Work On Most Stock Or Aftermarket Exhaust Header Applications
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - Jeep Grand Cherokee | V | - | 8 Cyl 5.7L | 345 |
- DynoMax Stainless Steel Tip
- Single Wall; Slant Cut; Length 6 in.; Inlet 2.5 in.; Outlet 3 in.; Clamp On Design Polished Stainless Steel; w/DynoMax(R) Embossed Logo Includes Clamp~3 in. T-304 Stainless Steel Spout
- DynoMax Stainless Steel Tip
- Exhaust Tip
- Product Attributes:
- Most Popular Make/Model: Ford F-150
- Outlet Connection Type: Spout
- Outlet Diameter Designation: Outside Diameter
- Inlet Diameter: 2.500 In.
- WARNING CA Proposition 65: No
- Overall Length: 6.000 In.
- Inlet Inside Diameter: 2.500 In.
- Class: Pb
- Product Grade: Premium
- Min Year Covered: 1964
- Main Piping Diameter: 2.500 In.
- Inlet Diameter Designation: Inside Diameter
- Outlet Quantity: 1
- Max Year Covered: 2018
- Most Popular Year: 2004
- Shape: Angle Cut
- Inlet Quantity: 1
- Usage: Automotive
- Total Part VIO: 11121835
- Inlet Connection Type: Pipe
- Outlet Type: Single Outlet
-
Features:
- Polished Stainless Steel w/DynoMax Etching
- Weldless Construction
- Double Wall Design
- T-304 Stainless Steel
- Easy To Install
- Manufactured and marketed by Tenneco Inc. (NYSE: TEN), DynoMax(R) Performance Exhaust is a leading brand of dyno-proven exhaust products for muscle cars, pass cars, diesel and gas trucks, Jeeps and sport utility vehicles. DynoMax(R) products – engineered for "Pure Unadulterated Power" –¬ include complete cat-back and axle-back performance exhaust systems; performance mufflers and the industry exclusive VT valve technology muffler; and a large assortment of accessories and related exhaust products. Each DynoMax(R) product features the benefits of worldwide global engineering resources. The DynoMax(R) brand is backed by an aggressive marketing program, including a national events program; easy-to-use website and digital and printed catalog; in-depth technical and installation information and tech line; and advertising program.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - Jeep Compass | L | 2360 | 4 Cyl 2.4L | 144 |
- DynoMax Stainless Steel Tip
- Single Wall; Slant Cut; Length 6 in.; Inlet 2.5 in.; Outlet 3 in.; Clamp On Design Polished Stainless Steel; w/DynoMax(R) Embossed Logo Includes Clamp~Super Turbo System~3 in. T-304 Stainless Steel Spout
- DynoMax Stainless Steel Tip
- Exhaust Tip
- Product Attributes:
- Most Popular Make/Model: Ford F-150
- Outlet Connection Type: Spout
- Outlet Diameter Designation: Outside Diameter
- Inlet Diameter: 2.500 In.
- WARNING CA Proposition 65: No
- Overall Length: 6.000 In.
- Inlet Inside Diameter: 2.500 In.
- Class: Pb
- Product Grade: Premium
- Min Year Covered: 1964
- Main Piping Diameter: 2.500 In.
- Inlet Diameter Designation: Inside Diameter
- Outlet Quantity: 1
- Max Year Covered: 2018
- Most Popular Year: 2004
- Shape: Angle Cut
- Inlet Quantity: 1
- Usage: Automotive
- Total Part VIO: 11121835
- Inlet Connection Type: Pipe
- Outlet Type: Single Outlet
-
Features:
- Polished Stainless Steel w/DynoMax Etching
- Weldless Construction
- Double Wall Design
- T-304 Stainless Steel
- Easy To Install
- Manufactured and marketed by Tenneco Inc. (NYSE: TEN), DynoMax(R) Performance Exhaust is a leading brand of dyno-proven exhaust products for muscle cars, pass cars, diesel and gas trucks, Jeeps and sport utility vehicles. DynoMax(R) products – engineered for "Pure Unadulterated Power" –¬ include complete cat-back and axle-back performance exhaust systems; performance mufflers and the industry exclusive VT valve technology muffler; and a large assortment of accessories and related exhaust products. Each DynoMax(R) product features the benefits of worldwide global engineering resources. The DynoMax(R) brand is backed by an aggressive marketing program, including a national events program; easy-to-use website and digital and printed catalog; in-depth technical and installation information and tech line; and advertising program.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - Jeep Wrangler | V | 3778 | 6 Cyl 3.8L | 231 |
Showing 1 - 10 of 121 products
Loading...