Image
Product
Price
- Exhaust Manifold Gasket; Right;
- Exhaust Manifold Gasket
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm; Http://www.p65warnings.ca.gov/
-
Features:
- Exhaust Manifold Gasket
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2013 - Chrysler 300 | V | - | Right | 8 Cyl 5.7L | 345 |
- Exhaust Manifold Gasket; Left;
- Exhaust Manifold Gasket
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm; Http://www.p65warnings.ca.gov/
-
Features:
- Exhaust Manifold Gasket
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2013 - Chrysler 300 | V | - | Left | 8 Cyl 5.7L | 345 |
- Hardware-Clamp 2 1/4in. Narrow Band-Stain.
- Size 2.25 in.; 430 Bright Stainless Steel Slotting Required On ID Connection For Proper Clamping
- Hardware-Clamp
- Walker Exhaust Band Clamp
- Product Attributes:
- Most Popular Make/Model: Ford Mustang
- Saddle Gauge: 15
- WARNING CA Proposition 65: No
- Saddle Hole Type: Round
- Hardware Material: 430 Stainless Steel
- Class: Hd
- Product Grade: Economy
- Min Year Covered: 2005
- Max Year Covered: 2017
- Most Popular Year: 2007
- Total Part VIO: 1295662
- Diameter (in.): 2.250 In.
- Clamp Type: Band
-
Features:
- Many Different Clamp Designs Available To Meet Your Needs
- Available In Stainless And Aluminized Steel
- Available In Individual Or Bulk Cartons
- Proudly Manufactured In The USA
- Walker(R), with our worldwide OE partnerships and manufacturing facilities, possesses the technical excellence needed to meet today's emissions control needs, while developing solutions for tomorrow's challenges. Walker(R) is a 'one-stop' convenience, offering complete engine-to-tailpipe coverage of replacement emissions control systems and components for popular domestic and import vehicles in broadmarket, performance, and commercial vehicle applications. Walker(R) delivers optimal OE-style fit, appearance, and dependability in aftermarket emissions control parts.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2013 - Chrysler 300 | V | 3604 | 6 Cyl 3.6L | Touring | 220 |
- Universal Catalytic Converter - 2.50in.
- CARB Executive Order D-193-141 Engine Family Number DCRXV05.7VP1 ; Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
- Universal Catalytic Converter - 2.50in.
- 2.50in. Universal California OBDII Catalytic Converter
- Product Attributes:
- Inlet Orientation: Straight
- Inlet Diameter: 2.5
- Heat Shield Attached: No
- Body Width: 4
- Overall Length: 11
- Body Type: Spun
- Body Height: 4
- Subtitle: California / Carb Compliant
- Substrate Material: Ceramic
- Inlet Attachment: Weld-on
- Outlet Orientation: Straight
- Body Shape: Round
- Outlet Attachment: Weld-on
- Air Tube Adaptable: No
- Body Length: 11
- Outlet Diameter: 2.5
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 2013 - Chrysler 300 | V | - | Left | 8 Cyl 5.7L | RWD | 345 |
- Universal Catalytic Converter - 2.50in.
- CARB Executive Order D-193-141 Engine Family Number DCRXV05.7VP1 ; Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
- Universal Catalytic Converter - 2.50in.
- 2.50in. Universal California OBDII Catalytic Converter
- Product Attributes:
- Inlet Orientation: Straight
- Inlet Diameter: 2.5
- Heat Shield Attached: No
- Body Width: 4
- Overall Length: 11
- Body Type: Spun
- Body Height: 4
- Subtitle: California / Carb Compliant
- Substrate Material: Ceramic
- Inlet Attachment: Weld-on
- Outlet Orientation: Straight
- Body Shape: Round
- Outlet Attachment: Weld-on
- Air Tube Adaptable: No
- Body Length: 11
- Outlet Diameter: 2.5
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 2013 - Chrysler 300 | V | - | Right | 8 Cyl 5.7L | RWD | 345 |
- Universal Catalytic Converter - 2.50in.
- CARB Executive Order D-193-141 Engine Family Number DCRXV03.6VP0 ; Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation 2-Bolt Flange
- Universal Catalytic Converter - 2.50in.
- 2.50in. Universal California OBDII Catalytic Converter
- Product Attributes:
- Inlet Orientation: Straight
- Inlet Diameter: 2.5
- Heat Shield Attached: No
- Body Width: 4
- Overall Length: 11
- Body Type: Spun
- Body Height: 4
- Subtitle: California / Carb Compliant
- Substrate Material: Ceramic
- Inlet Attachment: Weld-on
- Outlet Orientation: Straight
- Body Shape: Round
- Outlet Attachment: Weld-on
- Air Tube Adaptable: No
- Body Length: 11
- Outlet Diameter: 2.5
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2013 - Chrysler 300 | V | 3604 | Right | 6 Cyl 3.6L | 220 |
- Universal Catalytic Converter - 2.50in.
- CARB Executive Order D-193-141 Engine Family Number DCRXV03.6UPA ; Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation 2-Bolt Flange
- Universal Catalytic Converter - 2.50in.
- 2.50in. Universal California OBDII Catalytic Converter
- Product Attributes:
- Inlet Orientation: Straight
- Inlet Diameter: 2.5
- Heat Shield Attached: No
- Body Width: 4
- Overall Length: 11
- Body Type: Spun
- Body Height: 4
- Subtitle: California / Carb Compliant
- Substrate Material: Ceramic
- Inlet Attachment: Weld-on
- Outlet Orientation: Straight
- Body Shape: Round
- Outlet Attachment: Weld-on
- Air Tube Adaptable: No
- Body Length: 11
- Outlet Diameter: 2.5
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2013 - Chrysler 300 | V | 3604 | Left | 6 Cyl 3.6L | 220 |
- Universal Catalytic Converter - 2.50in.
- CARB Executive Order D-193-141 Engine Family Number DCRXV03.6UPA ; Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation 2-Bolt Flange
- Universal Catalytic Converter - 2.50in.
- 2.50in. Universal California OBDII Catalytic Converter
- Product Attributes:
- Inlet Orientation: Straight
- Inlet Diameter: 2.5
- Heat Shield Attached: No
- Body Width: 4
- Overall Length: 11
- Body Type: Spun
- Body Height: 4
- Subtitle: California / Carb Compliant
- Substrate Material: Ceramic
- Inlet Attachment: Weld-on
- Outlet Orientation: Straight
- Body Shape: Round
- Outlet Attachment: Weld-on
- Air Tube Adaptable: No
- Body Length: 11
- Outlet Diameter: 2.5
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2013 - Chrysler 300 | V | 3604 | Right | 6 Cyl 3.6L | 220 |
- Universal Catalytic Converter - 2.50in.
- CARB Executive Order D-193-141 Engine Family Number DCRXV03.6VP0 ; Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation 2-Bolt Flange
- Universal Catalytic Converter - 2.50in.
- 2.50in. Universal California OBDII Catalytic Converter
- Product Attributes:
- Inlet Orientation: Straight
- Inlet Diameter: 2.5
- Heat Shield Attached: No
- Body Width: 4
- Overall Length: 11
- Body Type: Spun
- Body Height: 4
- Subtitle: California / Carb Compliant
- Substrate Material: Ceramic
- Inlet Attachment: Weld-on
- Outlet Orientation: Straight
- Body Shape: Round
- Outlet Attachment: Weld-on
- Air Tube Adaptable: No
- Body Length: 11
- Outlet Diameter: 2.5
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2013 - Chrysler 300 | V | 3604 | Left | 6 Cyl 3.6L | 220 |
- Exhaust Manifold Gasket Set
- FEL-PRO MS 97083 Exhaust Manifold Gasket Set
- Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Chrysler 300 | V | - | 8 Cyl 5.7L | 345 |
Showing 1 - 10 of 75 products
Loading...