Image
Product
Price
- Universal Catalytic Converter - 2.25in.
- CARB Executive Order D-193-133 Engine Family Number DFJXJ03.6WFJ ; Certification Level : LEV2 ULEV OE Spec Ultra Low Emissions Vehicles (ULEV) Cutting and Welding Required During Installation
- Universal Catalytic Converter - 2.25in.
- 2.25in. Universal California OBDII Catalytic Converter
- Product Attributes:
- Inlet Orientation: Straight
- Inlet Diameter: 2.25
- Heat Shield Attached: No
- Body Width: 4
- Overall Length: 7
- Body Type: Spun
- Body Height: 4
- Subtitle: California / Carb Compliant
- Substrate Material: Ceramic
- Inlet Attachment: Weld-on
- Outlet Orientation: Straight
- Body Shape: Round
- Outlet Attachment: Weld-on
- Sensor Port Count: 0
- Air Tube Adaptable: No
- Body Length: 7
- Outlet Diameter: 2.25
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2013 - Subaru Legacy | H | 3630 | Front Right | 6 Cyl 3.6L | - |
- 2 in. Pipe Diameter/3.19 x 5 in. Single Round Rolled Angel Cut Tip; Single Right Rear Exit;50 State Legal / California Emissions Compliant T-304 Stainless Steel
- S-Type Axle-Back Exhaust System; 2 in. Pipe Diameter/3.19 x 5 in. Single Round Rolled Angel Cut Tip; Single Right Rear Exit;
- S-Type Axle-Back Exhaust System
- Product Attributes:
- Tail Pipe Diameter: 2.000 In.
- Tubing Diameter: 2.000 In.
- Exhaust Type: Axle-back
- Exit Position: Single Rear
- WARNING CA Proposition 65: Yes
- Inlet Inside Diameter: 2.000 In.
-
Features:
- Made From High-Quality T-304 Austenitic Stainless Steel
- Mandrel Bent Pipes
- Ensures Consistent Diameter Through Each Curve
- Mufflers Have No Baffles/Chambers
- Produces High Velocity
- Million Mile Warranty
- A Borla 'Axle Back' or rear section exhaust implies the exhaust system is located behind the vehicle rear axle . Most installations are completed in less than an hour and require no cutting of the factory system. A Borla Axle Back performance exhaust is a less restrictive aftermarket exhaust system that will improve the sound level both inside the cabin and exterior. Borla Axle Back exhaust systems use engine-specific (not universal) mufflers that are designed, tested, and optimized specifically for a particular year/make/model vehicle.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2013 - Subaru Impreza | H | 1995 | 4 Cyl 2.0L | Sport Premium | - |
- Single 2.5 in. Into Dual 2 in. Out; Includes Connecting Pipes/Muffler/Hardware/4.25 in. Round Rolled Angle Cut Tips; Split Rear Exit;50 State Legal / California Emissions Compliant T-304 Stainless Steel
- S-Type Cat-Back™ Exhaust System; Single 2.5 in. Into Dual 2 in. Out; Includes Connecting Pipes/Muffler/Hardware/4.25 in. Round Rolled Angle Cut Tips; Split Rear Exit;
- S-Type Cat-Back™ Exhaust System
- Product Attributes:
- Tail Pipe Diameter:
- 2.000 In.
- 2.500 In.
- Tail Pipe Material: Stainless Steel
- Tubing Diameter: 2.500 In.
- Exhaust Type:
- Axle-back
- Single
- Muffler Type: Turbo
- Exit Position: Split Rear
- Tip Diameter: 4.250 In.
- System Type: Cat Back
- WARNING CA Proposition 65: Yes
- Exit Style: Straight
- Inlet Inside Diameter: 2.500 In.
- Tail Pipe Diameter:
-
Features:
- Patented Straight-Through Technology
- Patented Multi-Core Technology
- Unleash Hidden Horsepower
- Distinctive Borla Sound Of Power
- Absolute Best In Performance And Durability
- Ensure Maximum Flow And Power
- CNC Manufacturing Ensures An Accurate Fit
- Million Mile Warranty
- The BORLA(R) sound of power. Its been described as asonic shot of adrenaline. An intoxicating concert ofsteel, gears and combustion that echoes from thespeedways, deserts and highways of the world.The sound of more victory laps than any otherbrand, the BORLA(R) exhaust note has become the quintessentioal soundtrack of high-performance motoring. And like all good automotive designs there is function behing the form. As any driving enthusiast knows, the sound of an exhaust provides more than just ear candy. Its a communications conduit between car and driver. A link between human and machine. The exhaust sound provides accoustic feedback of engine rpm to aid the driver in critical decisions such as gear selection or throttle input in rev-match shifting. At BORLA(R), we understand this concept better than any exhaust manufacturer. Combining patented technology with computer modeling, extensive prototyping and advanced sound analysis tools. BORLA(R) engineers spend countless hours tuning exhaust systems to best reflect the personality and performance of vehicle applications. The result is an enhanced driving experience. With unrivaled clarity, the BORLA(R) exhaust note can help a driver stay within the powerband through a difficult section, using the exciting sensory feedback of sound. With unrivaled clarity the Borla exhaust note can help a driver stay within the powerband through a difficult section, using the exciting sensry feedback of sound.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Subaru BRZ | H | 1998 | 4 Cyl 2.0L | 122 |
- Universal Catalytic Converter - 2.25in.
- CARB Executive Order D-193-133 Engine Family Number DFJXJ03.6WFJ ; Certification Level : LEV2 ULEV OE Spec Ultra Low Emissions Vehicles (ULEV) Cutting and Welding Required During Installation
- Universal Catalytic Converter - 2.25in.
- 2.25in. Universal California OBDII Catalytic Converter
- Product Attributes:
- Inlet Orientation: Straight
- Inlet Diameter: 2.25
- Heat Shield Attached: No
- Body Width: 4
- Overall Length: 7
- Body Type: Spun
- Body Height: 4
- Subtitle: California / Carb Compliant
- Substrate Material: Ceramic
- Inlet Attachment: Weld-on
- Outlet Orientation: Straight
- Body Shape: Round
- Outlet Attachment: Weld-on
- Sensor Port Count: 0
- Air Tube Adaptable: No
- Body Length: 7
- Outlet Diameter: 2.25
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2013 - Subaru Legacy | H | 3630 | Front Left | 6 Cyl 3.6L | - |
- Exhaust Manifold Gasket Set
- FEL-PRO MS 95088 Exhaust Manifold Gasket Set
- Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
This Part Fits the Following OEM/Substitute Numbers:
0378019, 0951334, 14038-AA000, 18616, MS12392
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Subaru WRX STI | H | 2458 | 4 Cyl 2.5L | - |
- 3 in.; Dual Split Rear Exit; T304 Stainless Steel; Race Version; Includes 3.5 in. OD Dual Out Carbon Fiber Tips;Meets EPA Standards
- Armor Pro Cat Back Exhaust System; 3 in.; Dual Split Rear Exit; T304 Stainless Steel; Race Version; Includes 3.5 in. OD Dual Out Carbon Fiber Tips;
- Armor Pro Cat Back Exhaust System
- Product Attributes:
- Exhaust Type: Cat-back
- Exit Position: Dual Split Rear
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Nickel (metallic) And Chromium (hexavalent Compounds) Which Are Known To The State Of California To Cause Cancer And Birth Defects; Or Other Reproductive Harm
-
Features:
- Improved Torque And Horsepower
- Lower Exhaust Gas Temperatures
- Increased Throttle Response
- Mellow Exhaust Note
- Bolt On Design
- Utilizes OEM Hangers
- Stainless Steel Tips Are Included
- Lifetime Warranty
- THE ONLY EXHAUST YOU'LL EVER NEED - MBRP ARMOR PRO Series exhaust systems are backed by a Lifetime Warranty and crafted out of T304Stainless Steel - the most durable material grade that money can buy. The T304 Stainless Steel tubing is easy to clean and maintain. It's the obvious choice for you if you operate your vehicle in extreme conditions. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine's cylinders, allowing it to produce more power and improve vehicle performance and longevity. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Body | CID |
|---|---|---|---|---|---|---|
| 2013 - Subaru Impreza | H | 2458 | 4 Cyl 2.5L | WRX Premium | Sedan | - |
- 3 in.; Dual Split Rear Exit; T304 Stainless Steel; Race Version; Includes 3.5 in. OD Dual Out Tips;Meets EPA Standards
- Armor Pro Cat Back Exhaust System; 3 in.; Dual Split Rear Exit; T304 Stainless Steel; Race Version; Includes 3.5 in. OD Dual Out Tips;
- Armor Pro Cat Back Exhaust System
- Product Attributes:
- Exhaust Type: Cat-back
- Exit Position: Dual Split Rear
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Nickel (metallic) And Chromium (hexavalent Compounds) Which Are Known To The State Of California To Cause Cancer And Birth Defects; Or Other Reproductive Harm
-
Features:
- Improved Torque And Horsepower
- Lower Exhaust Gas Temperatures
- Increased Throttle Response
- Mellow Exhaust Note
- Bolt On Design
- Utilizes OEM Hangers
- Stainless Steel Tips Are Included
- Lifetime Warranty
- THE ONLY EXHAUST YOU'LL EVER NEED - MBRP ARMOR PRO Series exhaust systems are backed by a Lifetime Warranty and crafted out of T304Stainless Steel - the most durable material grade that money can buy. The T304 Stainless Steel tubing is easy to clean and maintain. It's the obvious choice for you if you operate your vehicle in extreme conditions. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine's cylinders, allowing it to produce more power and improve vehicle performance and longevity. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Body | CID |
|---|---|---|---|---|---|---|
| 2013 - Subaru Impreza | H | 2458 | 4 Cyl 2.5L | WRX Limited | Sedan | - |
- Armor Pro Cat Back Exhaust System
- 3 in.; Dual Split Rear Exit; T304 Stainless Steel; Race Version; Includes 3.5 in. OD Dual Out Tips; [Available While Supplies Last]
- Armor Pro Cat Back Exhaust System; 3 in.; Dual Split Rear Exit; T304 Stainless Steel; Race Version; Includes 3.5 in. OD Dual Out Tips;
- Pro Series Cat Back Exhaust System
- Product Attributes:
- Exhaust Type: Cat-back
- Exit Position: Dual Split Rear
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message:
- Warning: This Product Can Expose You To Chemicals Including Nickel (metallic) And Chromium (hexavalent Compounds) Which Are Known To The State Of California To Cause Cancer And Birth Defects; Or Other Reproductive Harm
- Warning: This Product Can Expose You To Chemicals Including Nickel (metallic) And Chromium (hexavalent Compounds) Which Are Known To The State Of California To Cause Cancer And Birth Defects; Or Other Reproductive Harm - Www.p65warnings.ca.gov
-
Features:
- Improved Torque And Horsepower
- Lower Exhaust Gas Temperatures
- Increased Throttle Response
- Mellow Exhaust Note
- Bolt On Design
- Utilizes OEM Hangers
- Stainless Steel Tips Are Included
- Lifetime Warranty
- THE ONLY EXHAUST YOU'LL EVER NEED - MBRP ARMOR PRO Series exhaust systems are backed by a Lifetime Warranty and crafted out of T304Stainless Steel - the most durable material grade that money can buy. The T304 Stainless Steel tubing is easy to clean and maintain. It's the obvious choice for you if you operate your vehicle in extreme conditions. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine's cylinders, allowing it to produce more power and improve vehicle performance and longevity. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2013 - Subaru Impreza | H | 2458 | 4 Cyl 2.5L | WRX STI Limited | - |
- Armor Pro Cat Back Exhaust System
- 3 in.; Dual Split Rear Exit; T304 Stainless Steel; Race Version; Includes 3.5 in. OD Dual Out Carbon Fiber Tips; [Available While Supplies Last]
- Armor Pro Cat Back Exhaust System; 3 in.; Dual Split Rear Exit; T304 Stainless Steel; Race Version; Includes 3.5 in. OD Dual Out Carbon Fiber Tips;
- Pro Series Cat Back Exhaust System
- Product Attributes:
- Exhaust Type: Cat-back
- Exit Position: Dual Split Rear
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message:
- Warning: This Product Can Expose You To Chemicals Including Nickel (metallic) And Chromium (hexavalent Compounds) Which Are Known To The State Of California To Cause Cancer And Birth Defects; Or Other Reproductive Harm
- Warning: This Product Can Expose You To Chemicals Including Nickel (metallic) And Chromium (hexavalent Compounds) Which Are Known To The State Of California To Cause Cancer And Birth Defects; Or Other Reproductive Harm - Www.p65warnings.ca.gov
-
Features:
- Improved Torque And Horsepower
- Lower Exhaust Gas Temperatures
- Increased Throttle Response
- Mellow Exhaust Note
- Bolt On Design
- Utilizes OEM Hangers
- Stainless Steel Tips Are Included
- Lifetime Warranty
- THE ONLY EXHAUST YOU'LL EVER NEED - MBRP ARMOR PRO Series exhaust systems are backed by a Lifetime Warranty and crafted out of T304Stainless Steel - the most durable material grade that money can buy. The T304 Stainless Steel tubing is easy to clean and maintain. It's the obvious choice for you if you operate your vehicle in extreme conditions. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine's cylinders, allowing it to produce more power and improve vehicle performance and longevity. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Body | CID |
|---|---|---|---|---|---|---|
| 2013 - Subaru Impreza | H | 2458 | 4 Cyl 2.5L | WRX STI | Sedan | - |
- 3 in.; Single Rear Exit; T304 Stainless Steel; 5 in. Burnt End Tips;Meets EPA Standards
- Armor Pro Cat Back Performance Exhaust System; 3 in.; Single Rear Exit; T304 Stainless Steel; 5 in. Burnt End Tips;
- Armor Pro Cat Back Performance Exhaust System
- Product Attributes:
- Exhaust Type: Cat Back
- Exit Position: Single Rear
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Nickel (metallic) And Chromium (hexavalent Compounds) Which Are Known To The State Of California To Cause Cancer And Birth Defects; Or Other Reproductive Harm
-
Features:
- Improved Torque And Horsepower
- Lower Exhaust Gas Temperatures
- Increased Throttle Response
- Bolt On Design
- Utilizes OEM Hangers
- THE ONLY EXHAUST YOU'LL EVER NEED - MBRP ARMOR PRO Series exhaust systems are backed by a Lifetime Warranty and crafted out of T304Stainless Steel - the most durable material grade that money can buy. The T304 Stainless Steel tubing is easy to clean and maintain. It's the obvious choice for you if you operate your vehicle in extreme conditions. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine's cylinders, allowing it to produce more power and improve vehicle performance and longevity. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.
Additional Fitment Information:
| Vehicle |
|---|
| 2013 - Subaru BRZ |
Showing 1 - 10 of 135 products
Loading...