2016 Chevrolet Exhaust Parts
Choose a Model for your 2016 Chevrolet
Image
Product
Price
- Direct-Fit Catalytic Converter
- CARB Executive Order D-193-148 Engine Family Number GGMXJ02.4199 ; Certification Level : LEV2 ULEV
- Direct-Fit Catalytic Converter
- Direct-Fit CALIFORNIA OBDII CONVERTERS
- Product Attributes:
- Inlet Attachment: Bolt-on
- Main Piping Diameter: 2.25
- Inlet Diameter: 2.5
- Outlet Attachment: Bolt-on
- Substrate: Ceramic
- Body Width: 4
- Body Type: Spun
- Body Height: 4
- Subtitle: California / Carb Compliant
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2016 - Chevrolet Equinox | L | 2384 | Front | 4 Cyl 2.4L | 145 |
- Direct-Fit Catalytic Converter
- CARB Executive Order D-193-148 Engine Family Number GGMXT02.4151 ; Certification Level : LEV2 ULEV
- Direct-Fit Catalytic Converter
- Direct-Fit CALIFORNIA OBDII CONVERTERS
- Product Attributes:
- Inlet Attachment: Bolt-on
- Main Piping Diameter: 2.25
- Inlet Diameter: 2.5
- Outlet Attachment: Bolt-on
- Substrate: Ceramic
- Body Width: 4
- Body Type: Spun
- Body Height: 4
- Subtitle: California / Carb Compliant
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2016 - Chevrolet Equinox | L | 2384 | Front | 4 Cyl 2.4L | 145 |
- Direct-Fit Catalytic Converter
- Direct-Fit Catalytic Converter
- Direct-Fit OEM GRADE Federal (Excludes California)
- Product Attributes:
- Inlet Attachment: Bolt-on
- Outlet Attachment: Bolt-on
- Sensor Port Count: 0
- Subtitle: Federal / Epa Compliant
- Substrate Material: Ceramic
This Part Fits the Following OEM/Substitute Numbers:
15903507, 25776079
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2016 - Chevrolet Traverse | V | 3564 | Front Forward | 6 Cyl 3.6L | LT | 217 |
- Wedge-Locking Header Bolts
- Hex Head; 3/8-16 Thread X 3/4 in Black Oxide
- Fits GM BB 396-502 exc 348 and 409, Ford 5.0L, SB 289-302-351W, Mopar 413
- Product Attributes:
- Diameter: 3/8-in.
- Category: Header Bolts
- Feature/Benefit: Wedge-locking Technology Eliminates Constantly Re-tightening Exhaust Collector Bolts; Blocks Bolt-loosening Rotation Caused By Vehicle Vibrations.
- Length: 3/4 Inch
- Applications: Fits Gm Bb 396-502 Exc 348 And 409, Ford 5.0l, Sb 289-302-351w, Mopar 413
- Part Type: Header Bolts
- Material: Steel
- Finish: Black Oxide
- PROFORM Wedge-Locking Header Bolts ELIMINATE the need to constantly re-tighten collector bolts, and without the need for clips, pins, racing-wire, chemicals or gunk. The secret is in the Wedge-Locking Washer's super-hardened external teeth that "bite" into the bottom of the bolt head and the top flange surface. Vibrations that normally cause other bolts to loosen, are blocked by the wedge-locking action that uses tension, instead of friction to stay snug. In fact, contact with oil actually facilitates the effect. Installs/uninstalls with a normal wrench, lubricate, and then reuse. Each set comes with sixteen Hex Head, Grade 8 (12.9) steel bolts (3/8"-16 thread, 3/4" long) with a black oxide finish, and pre-assembled Wedge-Locking Washers.
-
Suggested Purchase Quantity: 16
- Most jobs typically require 16 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2016 - Chevrolet Silverado 1500 | V | - | 6 Cyl 4.3L | 262 |
- 12 Pcs
- Hex Head; 3/8 dia. X 1in Black Oxide
- Fits GM V6, SB 265-400, Buick, Olds, Pontiac 79 and earlier, Mopar BB 383-440 exc 413, AMC V8's w 3/8in bolts
- Product Attributes:
- Diameter: 3/8-in.
- Category: Header Bolts
- Feature/Benefit: Wedge-locking Technology Eliminates Constantly Re-tightening Exhaust Collector Bolts; Blocks Bolt-loosening Rotation Caused By Vehicle Vibrations.
- Length: 1 Inch
- Applications: Fits Gm V6, Sb 265-400, Buick, Olds, Pontiac 79 And Earlier, Mopar Bb 383-440 Exc 413, Amc V8's W 3/8in Bolts
- Part Type: Header Bolts
- Material: Steel
- Finish: Black Oxide
- PROFORM Wedge-Locking Header Bolts ELIMINATE the need to constantly re-tighten collector bolts, and without the need for clips, pins, racing-wire, chemicals or gunk. The secret is in the Wedge-Locking Washer's super-hardened external teeth that "bite" into the bottom of the bolt head and the top flange surface. Vibrations that normally cause other bolts to loosen, are blocked by the wedge-locking action that uses tension, instead of friction to stay snug. In fact, contact with oil actually facilitates the effect. Installs/uninstalls with a normal wrench, lubricate, and then reuse. Each set comes with twelve Hex Head, Grade 8 (12.9) steel bolts (3/8"-16 thread, 1" long) with a black oxide finish, and pre-assembled Wedge-Locking Washers.
-
Suggested Purchase Quantity: 12
- Most jobs typically require 12 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2016 - Chevrolet Silverado 1500 | V | - | 6 Cyl 4.3L | 262 |
- 12 Pcs
- Hex Head; 3/8 dia. X 3/4in Black Oxide
- Fits GM V6, SB 265-400, Buick, Olds, Pontiac '79 and earlier, Mopar BB 383-440 exc 413, AMC V8's w 3/8" bolts
- Product Attributes:
- Bolt Grade: 8
- Diameter: 3/8-in.
- Category: Header Bolts
- Feature/Benefit: Wedge-locking Technology Eliminates Constantly Re-tightening Exhaust Collector Bolts; Blocks Bolt-loosening Rotation Caused By Vehicle Vibrations.
- Length: 3/4 Inch
- Applications: Fits Gm V6, Sb 265-400, Buick, Olds, Pontiac 79 And Earlier, Mopar Bb 383-440 Exc 413, Amc V8's W 3/8in Bolts
- Part Type: Header Bolts
- Thread Type: Fine
- Head Drive Type: Hex
- Material: Steel
- Finish: Black Oxide
- PROFORM Wedge-Locking Header Bolts ELIMINATE the need to constantly re-tighten collector bolts, and without the need for clips, pins, racing-wire, chemicals or gunk. The secret is in the Wedge-Locking Washer's super-hardened external teeth that "bite" into the bottom of the bolt head and the top flange surface. Vibrations that normally cause other bolts to loosen, are blocked by the wedge-locking action that uses tension, instead of friction to stay snug. In fact, contact with oil actually facilitates the effect. Installs/uninstalls with a normal wrench, lubricate, and then reuse. Each set comes with twelve Hex Head, Grade 8 (12.9) steel bolts (3/8"-16 thread, 3/4" long) with a black oxide finish, and pre-assembled Wedge-Locking Washers.
-
Suggested Purchase Quantity: 12
- Most jobs typically require 12 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2016 - Chevrolet Silverado 1500 | V | - | 6 Cyl 4.3L | 262 |
- Axle-Back
- Dual Rear Exit; 2.75 in. Dia.; Includes Muffler/Pipes/Clamps/Quad 4.5 in. Polished Pro Series Tips
- 2.75in. Axle-Back Dual Rear Exit with Quad 4.5in. Polished Pro-Series Tips
- Xtreme Axle-Back Exhaust System
- Product Attributes:
- Tubing Diameter: 2.750 In.
- Exhaust Type: Single
- Muffler Type: Chambered
- Tip Logo: None
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message:
- Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Warning: Cancer And Reproductive Harm Www.p65warnings.ca.gov
- Exit Style: Straight
- Inlet Inside Diameter: 2.750 In.
- Outlet Outside Diameter: 2.750 In.
- Tail Pipe Material: Stainless Steel
- Tail Pipe Diameter: 2.750 In.
- Tip Diameter: 4.500 In.
- Exit Position: Dual Rear
- System Type: Axle Back
-
Features:
- Patented No Drone Reflective Sound Cancellation RSC Technology
- Custom Tuned - Aggressive Exhaust Note
- No Drone At Cruise
- 304 Stainless Steel Construction
- Flows Better Than Stock
- Dual Walled Polished Stainless Steel Tips
- Lighter Than Stock
- Easy Bolt-On Installation
- Detailed Printed Instructions Includes Full-Color Available Online
- No Welding Required
- Limited Lifetime Warranty
- Made in the U.S.A.
- CORSAs Patented Reflective Sound Cancellation(R) (RSC) Technology allows acoustic engineers to create a drone free exhaust sound, styled specifically to fit the personality of your vehicle. Each system is designed to increase vehicle performance, deliver an AGGRESSIVE SOUND under acceleration and a DRONE-FREE EXPERIENCE during cruise. Performance gains are not affected by sound choice.
Additional Fitment Information:
| Vehicle | Engine Designation | Sub Model | Engine VIN | Aspiration |
|---|---|---|---|---|
| 2016 - Chevrolet Corvette | LT4 | Z06 | 6 | Supercharged |
- Exhaust Pipe Flange Gasket
- FEL-PRO 61323 Exhaust Pipe Flange Gasket for Chevrolet Silverado 1500
- Product Attributes:
- Grade Type: Premium
-
Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
This Part Fits the Following OEM/Substitute Numbers:
15077362, 711362200, 711368100, EG24415, F31731
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2016 - Chevrolet Suburban 3500 HD | V | 5967 | Manifold To Front Pipe (Left) | 8 Cyl 6.0L | 364 |
- Dual Same Side Before Passenger Rear Tire Exit
- Street Series Stainless Cat-Back System
- Street Series Stainless Cat-Back System
- Product Attributes:
- Main Piping Diameter: 3
- Muffler Type: Straight-through
- Tip Diameter: 3.5
- Muffler Finish: Satin
- Exit Style: Dual Same Side Before Passenger Rear Tire
- Tip Length: 9.5
- Tip Type: Welded;double Wall;angle Cut;folded Edge
- Inlet Connection Type: Clamp-on
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | Body | CID |
|---|---|---|---|---|---|---|
| 2016 - Chevrolet Silverado 1500 | V | 5328 | 8 Cyl 5.3L | 69.3 | Crew Cab Pickup | 325 |
- Quad Split Rear Exit For Vehicles with Factory Quad Exit Exhaust Excludes Vehicles with Ground Effects Package
- Competition Series Stainless Axle-Back System
- Competition Series Stainless Axle-Back System
- Product Attributes:
- Main Piping Diameter: 3
- Muffler Type: Straight-through
- Tip Diameter: 4
- Muffler Finish: Satin
- Muffler Size: 5x8x11
- Exit Style: Quad Split Rear
- Tip Length: 7
- Tip Type: Welded-on;double Wall;angle Cut;folded Edge
- Clamp Type: Band Clamp
- Inlet Connection Type: Clamp-on
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2016 - Chevrolet Camaro | V | 6162 | 8 Cyl 6.2L | 376 |
Showing 1 - 10 of 379 products
Loading...