Image
Product
Price
- Exhaust Manifold Gasket; Left;
- Exhaust Manifold Gasket
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm; Http://www.p65warnings.ca.gov/
-
Features:
- Exhaust Manifold Gasket
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2016 - Chrysler 300 | V | - | Left | 8 Cyl 5.7L | 345 |
- Exhaust Manifold Gasket; Right;
- Exhaust Manifold Gasket
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm; Http://www.p65warnings.ca.gov/
-
Features:
- Exhaust Manifold Gasket
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2016 - Chrysler 300 | V | - | Right | 8 Cyl 5.7L | 345 |
- Universal Catalytic Converter - 2.50in.
- CARB Executive Order D-193-141 Engine Family Number GCRXV03.65P1 ; Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
- Universal Catalytic Converter - 2.50in.
- 2.50in. Universal California OBDII Catalytic Converter
- Product Attributes:
- Inlet Orientation: Straight
- Inlet Diameter: 2.5
- Heat Shield Attached: No
- Body Width: 4
- Overall Length: 11
- Body Type: Spun
- Body Height: 4
- Subtitle: California / Carb Compliant
- Substrate Material: Ceramic
- Inlet Attachment: Weld-on
- Outlet Orientation: Straight
- Body Shape: Round
- Outlet Attachment: Weld-on
- Air Tube Adaptable: No
- Body Length: 11
- Outlet Diameter: 2.5
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2016 - Chrysler 300 | V | 3604 | Left | GAS | 6 Cyl 3.6L | 220 |
- Universal Catalytic Converter - 2.50in.
- CARB Executive Order D-193-141 Engine Family Number GCRXV03.65PB ; Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
- Universal Catalytic Converter - 2.50in.
- 2.50in. Universal California OBDII Catalytic Converter
- Product Attributes:
- Inlet Orientation: Straight
- Inlet Diameter: 2.5
- Heat Shield Attached: No
- Body Width: 4
- Overall Length: 11
- Body Type: Spun
- Body Height: 4
- Subtitle: California / Carb Compliant
- Substrate Material: Ceramic
- Inlet Attachment: Weld-on
- Outlet Orientation: Straight
- Body Shape: Round
- Outlet Attachment: Weld-on
- Air Tube Adaptable: No
- Body Length: 11
- Outlet Diameter: 2.5
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|---|
| 2016 - Chrysler 300 | V | 3604 | Right | GAS | 6 Cyl 3.6L | RWD | 220 |
- Universal Catalytic Converter - 2.50in.
- CARB Executive Order D-193-141 Engine Family Number GCRXV03.65P1 ; Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
- Universal Catalytic Converter - 2.50in.
- 2.50in. Universal California OBDII Catalytic Converter
- Product Attributes:
- Inlet Orientation: Straight
- Inlet Diameter: 2.5
- Heat Shield Attached: No
- Body Width: 4
- Overall Length: 11
- Body Type: Spun
- Body Height: 4
- Subtitle: California / Carb Compliant
- Substrate Material: Ceramic
- Inlet Attachment: Weld-on
- Outlet Orientation: Straight
- Body Shape: Round
- Outlet Attachment: Weld-on
- Air Tube Adaptable: No
- Body Length: 11
- Outlet Diameter: 2.5
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|---|
| 2016 - Chrysler 300 | V | 3604 | Right | GAS | 6 Cyl 3.6L | RWD | 220 |
- Universal Catalytic Converter - 2.50in.
- CARB Executive Order D-193-141 Engine Family Number GCRXV03.65PB ; Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
- Universal Catalytic Converter - 2.50in.
- 2.50in. Universal California OBDII Catalytic Converter
- Product Attributes:
- Inlet Orientation: Straight
- Inlet Diameter: 2.5
- Heat Shield Attached: No
- Body Width: 4
- Overall Length: 11
- Body Type: Spun
- Body Height: 4
- Subtitle: California / Carb Compliant
- Substrate Material: Ceramic
- Inlet Attachment: Weld-on
- Outlet Orientation: Straight
- Body Shape: Round
- Outlet Attachment: Weld-on
- Air Tube Adaptable: No
- Body Length: 11
- Outlet Diameter: 2.5
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2016 - Chrysler 300 | V | 3604 | Left | GAS | 6 Cyl 3.6L | 220 |
- Universal Catalytic Converter - 2.50in.
- CARB Executive Order D-193-141 Engine Family Number GCRXV05.75P1 ; Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
- Universal Catalytic Converter - 2.50in.
- 2.50in. Universal California OBDII Catalytic Converter
- Product Attributes:
- Inlet Orientation: Straight
- Inlet Diameter: 2.5
- Heat Shield Attached: No
- Body Width: 4
- Overall Length: 11
- Body Type: Spun
- Body Height: 4
- Subtitle: California / Carb Compliant
- Substrate Material: Ceramic
- Inlet Attachment: Weld-on
- Outlet Orientation: Straight
- Body Shape: Round
- Outlet Attachment: Weld-on
- Air Tube Adaptable: No
- Body Length: 11
- Outlet Diameter: 2.5
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 2016 - Chrysler 300 | V | - | Right | 8 Cyl 5.7L | RWD | 345 |
- Universal Catalytic Converter - 2.50in.
- CARB Executive Order D-193-141 Engine Family Number GCRXV05.75P1 ; Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
- Universal Catalytic Converter - 2.50in.
- 2.50in. Universal California OBDII Catalytic Converter
- Product Attributes:
- Inlet Orientation: Straight
- Inlet Diameter: 2.5
- Heat Shield Attached: No
- Body Width: 4
- Overall Length: 11
- Body Type: Spun
- Body Height: 4
- Subtitle: California / Carb Compliant
- Substrate Material: Ceramic
- Inlet Attachment: Weld-on
- Outlet Orientation: Straight
- Body Shape: Round
- Outlet Attachment: Weld-on
- Air Tube Adaptable: No
- Body Length: 11
- Outlet Diameter: 2.5
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 2016 - Chrysler 300 | V | - | Left | 8 Cyl 5.7L | RWD | 345 |
- 2.25 in; Includes Connecting X-Pipes/Mufflers/Hardware; No Tip - Uses Factory Valance; Single Split Rear Exit;50 State Legal / California Emissions Compliant
- ATAK® Cat-Back™ Exhaust System; 2.25 in; Includes Connecting X-Pipes/Mufflers/Hardware; No Tip - Uses Factory Valance; Single Split Rear Exit;
- ATAK® Cat-Back™ Exhaust System
- Product Attributes:
- Tubing Diameter: 2.250 In.
- Exhaust Type:
- Axle-back
- Single
- Muffler Type: Turbo
- WARNING CA Proposition 65: Yes
- Exit Style: Straight
- Inlet Inside Diameter: 2.250 In.
- Outlet Outside Diameter: 2.250 In.
- Tail Pipe Material: Stainless Steel
- Tail Pipe Diameter: 2.250 In.
- Exit Position: Single Rear
- Tip Diameter: N/a
- System Type: Cat Back
-
Features:
- Patented Straight-Through Technology
- Patented Multi-Core Technology
- Unleash Hidden Horsepower
- Distinctive Borla Sound Of Power
- Absolute Best In Performance And Durability
- Ensure Maximum Flow And Power
- CNC Manufacturing Ensures An Accurate Fit
- Million Mile Warranty
- The BORLA(R) sound of power. Its been described as asonic shot of adrenaline. An intoxicating concert ofsteel, gears and combustion that echoes from thespeedways, deserts and highways of the world.The sound of more victory laps than any otherbrand, the BORLA(R) exhaust note has become the quintessentioal soundtrack of high-performance motoring. And like all good automotive designs there is function behing the form. As any driving enthusiast knows, the sound of an exhaust provides more than just ear candy. Its a communications conduit between car and driver. A link between human and machine. The exhaust sound provides accoustic feedback of engine rpm to aid the driver in critical decisions such as gear selection or throttle input in rev-match shifting. At BORLA(R), we understand this concept better than any exhaust manufacturer. Combining patented technology with computer modeling, extensive prototyping and advanced sound analysis tools. BORLA(R) engineers spend countless hours tuning exhaust systems to best reflect the personality and performance of vehicle applications. The result is an enhanced driving experience. With unrivaled clarity, the BORLA(R) exhaust note can help a driver stay within the powerband through a difficult section, using the exciting sensory feedback of sound. With unrivaled clarity the Borla exhaust note can help a driver stay within the powerband through a difficult section, using the exciting sensry feedback of sound.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2016 - Chrysler 300 | V | 3604 | 6 Cyl 3.6L | 220 |
- Dual; Dual Rear Exit; 2.5 in. Outlet; Super 44 Delta Flow Mufflers; 2.5 in. Tubing; 409 Stainless Steel;50 State Legal / California Emissions Compliant
- American Thunder Cat Back Exhaust System; Dual; Dual Rear Exit; 2.5 in. Outlet; Super 44 Delta Flow Mufflers; 2.5 in. Tubing; 409 Stainless Steel;
- American Thunder Cat Back Exhaust System
- Product Attributes:
- Tip Quantity: 2
- Tip Logo: None
- Inlet Diameter: 2.500 In.
- Sound Level: Moderate/aggressive
- WARNING CA Proposition 65: Yes
- Tip Finish: Polished
- Tip Type: Single Wall
- Exit Position: Dual Rear
- Tip Diameter: 2.500 In.
- Muffler Count: 2
- Single or Dual: Dual
- System Type: Cat Back
- Tip Material: Stainless Steel
- Outlet Diameter: 2.500 In.
- Tubing Diameter: 2.500 In.
- Exhaust Type: Dual
- Mount Type: Flanged
- California Proposition 65 Chemical Name 2: Chromium (hexavalent Compounds)
- Catalytic Converter Included: No
- California Proposition 65 Chemical Name 1: Nickel (metallic)
- Exhaust Series: American Thunder
- Heat Shield Attached: No
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Exit Style: Straight
- Muffler Series: Super 44
- Tip Cut: Angle
- Inlet Inside Diameter: 2.500 In.
- Outlet Outside Diameter: 2.500 In.
- Tail Pipe Diameter: 2.500 In.
- Shape: Oval
- Tip Shape: Round
- Tip Edge Style: Cut
- Muffler Part Number: Kit Only
-
Features:
- Mandrel Bent Stainless Steel Tubing
- Aggressive Exterior Exhaust Tone
- Includes Hangers and Hardware For Easy Installation
- Dyno Tuned for Maximum Performance
- Premium Flowmaster Quality
- Patented Delta Flow Technology
- Limited Lifetime Warranty
- Made in the USA
- The Flowmaster American Thunder Cat-back exhaust system for the 2015-2016 Dodge Charger R/T and 2015-2022 Chrysler 300 with the 5.7L Hemi engine is perfect for the person looking for an aggressive exterior and interior sound level with all of the performance benefits that you would expect from Flowmaster. This bolt-on 409S stainless steel system features a pair of Super 44 Series mufflers for a deep, aggressive sound. The system uses our dual 2.50-inch Scavenger Series X-Pipe and mandrel-bent tubing for maximum performance and a deep performance tone. The system is finished off with 2.50-inch stainless steel tips that exit within the factory exhaust bezels located in the rear bumper valence. Designed for an easy fit, this system includes all necessary parts and hardware for installation and includes our Lifetime Limited Warranty. Notes: Does NOT fit Charger Pursuit models identified by round exhaust cutouts without factory exhaust bezels in the rear valance.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2016 - Chrysler 300 | V | - | 8 Cyl 5.7L | C Platinum | 345 |
Showing 1 - 10 of 42 products
Loading...