2019 Chevrolet Exhaust Parts
Choose a Model for your 2019 Chevrolet
Image
Product
Price
- Wedge-Locking Header Bolts
- Hex Head; 3/8-16 Thread X 3/4 in Black Oxide
- Fits GM BB 396-502 exc 348 and 409, Ford 5.0L, SB 289-302-351W, Mopar 413
- Product Attributes:
- Diameter: 3/8-in.
- Category: Header Bolts
- Feature/Benefit: Wedge-locking Technology Eliminates Constantly Re-tightening Exhaust Collector Bolts; Blocks Bolt-loosening Rotation Caused By Vehicle Vibrations.
- Length: 3/4 Inch
- Applications: Fits Gm Bb 396-502 Exc 348 And 409, Ford 5.0l, Sb 289-302-351w, Mopar 413
- Part Type: Header Bolts
- Material: Steel
- Finish: Black Oxide
- PROFORM Wedge-Locking Header Bolts ELIMINATE the need to constantly re-tighten collector bolts, and without the need for clips, pins, racing-wire, chemicals or gunk. The secret is in the Wedge-Locking Washer's super-hardened external teeth that "bite" into the bottom of the bolt head and the top flange surface. Vibrations that normally cause other bolts to loosen, are blocked by the wedge-locking action that uses tension, instead of friction to stay snug. In fact, contact with oil actually facilitates the effect. Installs/uninstalls with a normal wrench, lubricate, and then reuse. Each set comes with sixteen Hex Head, Grade 8 (12.9) steel bolts (3/8"-16 thread, 3/4" long) with a black oxide finish, and pre-assembled Wedge-Locking Washers.
-
Suggested Purchase Quantity: 16
- Most jobs typically require 16 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2019 - Chevrolet Express 3500 | V | - | 6 Cyl 4.3L | 262 |
- 12 Pcs
- Hex Head; 3/8 dia. X 1in Black Oxide
- Fits GM V6, SB 265-400, Buick, Olds, Pontiac 79 and earlier, Mopar BB 383-440 exc 413, AMC V8's w 3/8in bolts
- Product Attributes:
- Diameter: 3/8-in.
- Category: Header Bolts
- Feature/Benefit: Wedge-locking Technology Eliminates Constantly Re-tightening Exhaust Collector Bolts; Blocks Bolt-loosening Rotation Caused By Vehicle Vibrations.
- Length: 1 Inch
- Applications: Fits Gm V6, Sb 265-400, Buick, Olds, Pontiac 79 And Earlier, Mopar Bb 383-440 Exc 413, Amc V8's W 3/8in Bolts
- Part Type: Header Bolts
- Material: Steel
- Finish: Black Oxide
- PROFORM Wedge-Locking Header Bolts ELIMINATE the need to constantly re-tighten collector bolts, and without the need for clips, pins, racing-wire, chemicals or gunk. The secret is in the Wedge-Locking Washer's super-hardened external teeth that "bite" into the bottom of the bolt head and the top flange surface. Vibrations that normally cause other bolts to loosen, are blocked by the wedge-locking action that uses tension, instead of friction to stay snug. In fact, contact with oil actually facilitates the effect. Installs/uninstalls with a normal wrench, lubricate, and then reuse. Each set comes with twelve Hex Head, Grade 8 (12.9) steel bolts (3/8"-16 thread, 1" long) with a black oxide finish, and pre-assembled Wedge-Locking Washers.
-
Suggested Purchase Quantity: 12
- Most jobs typically require 12 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2019 - Chevrolet Express 2500 | V | - | 6 Cyl 4.3L | 262 |
- 12 Pcs
- Hex Head; 3/8 dia. X 3/4in Black Oxide
- Fits GM V6, SB 265-400, Buick, Olds, Pontiac '79 and earlier, Mopar BB 383-440 exc 413, AMC V8's w 3/8" bolts
- Product Attributes:
- Bolt Grade: 8
- Diameter: 3/8-in.
- Category: Header Bolts
- Feature/Benefit: Wedge-locking Technology Eliminates Constantly Re-tightening Exhaust Collector Bolts; Blocks Bolt-loosening Rotation Caused By Vehicle Vibrations.
- Length: 3/4 Inch
- Applications: Fits Gm V6, Sb 265-400, Buick, Olds, Pontiac 79 And Earlier, Mopar Bb 383-440 Exc 413, Amc V8's W 3/8in Bolts
- Part Type: Header Bolts
- Thread Type: Fine
- Head Drive Type: Hex
- Material: Steel
- Finish: Black Oxide
- PROFORM Wedge-Locking Header Bolts ELIMINATE the need to constantly re-tighten collector bolts, and without the need for clips, pins, racing-wire, chemicals or gunk. The secret is in the Wedge-Locking Washer's super-hardened external teeth that "bite" into the bottom of the bolt head and the top flange surface. Vibrations that normally cause other bolts to loosen, are blocked by the wedge-locking action that uses tension, instead of friction to stay snug. In fact, contact with oil actually facilitates the effect. Installs/uninstalls with a normal wrench, lubricate, and then reuse. Each set comes with twelve Hex Head, Grade 8 (12.9) steel bolts (3/8"-16 thread, 3/4" long) with a black oxide finish, and pre-assembled Wedge-Locking Washers.
-
Suggested Purchase Quantity: 12
- Most jobs typically require 12 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2019 - Chevrolet Express 2500 | V | - | 6 Cyl 4.3L | 262 |
- Axle-Back
- Dual Rear Exit; 2.75 in. Dia.; Includes Muffler/Pipes/Clamps/Quad 4.5 in. Polished Black PVD Pro-Series Tips
- 2.75in. Axle-Back Dual Rear Exit with Quad 4.5in. Black PVD Pro-Series Tips
- Sport Axle-Back Exhaust System
- Product Attributes:
- Tubing Diameter: 2.750 In.
- Exhaust Type: Single
- Muffler Type: Chambered
- Tip Logo: None
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message:
- Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Warning: Cancer And Reproductive Harm Www.p65warnings.ca.gov
- Exit Style: Straight
- Inlet Inside Diameter: 2.750 In.
- Outlet Outside Diameter: 2.750 In.
- Tail Pipe Material: Stainless Steel
- Tail Pipe Diameter: 2.750 In.
- Tip Diameter: 4.500 In.
- Exit Position: Dual Rear
- System Type: Axle Back
-
Features:
- Patented No Drone Reflective Sound Cancellation RSC Technology
- Custom Tuned - Aggressive Exhaust Note
- No Drone At Cruise
- 304 Stainless Steel Construction
- Flows Better Than Stock
- Dual Walled Polished Stainless Steel Tips
- Lighter Than Stock
- Easy Bolt-On Installation
- Detailed Printed Instructions Includes Full-Color Available Online
- No Welding Required
- Limited Lifetime Warranty
- Made in the U.S.A.
- CORSAs Patented Reflective Sound Cancellation(R) (RSC) Technology allows acoustic engineers to create a drone free exhaust sound, styled specifically to fit the personality of your vehicle. Each system is designed to increase vehicle performance, deliver an AGGRESSIVE SOUND under acceleration and a DRONE-FREE EXPERIENCE during cruise. Performance gains are not affected by sound choice.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2019 - Chevrolet Corvette | V | 6162 | 8 Cyl 6.2L | ZR1 | 376 |
- Axle-Back
- Dual Rear Exit; 2.75 in. Dia.; Includes Muffler/Pipes/Clamps/Quad 4.5 in. Polished Pro Series Tips
- 2.75in. Axle-Back Dual Rear Exit with Quad 4.5in. Polished Pro-Series Tips
- Xtreme Axle-Back Exhaust System
- Product Attributes:
- Tubing Diameter: 2.750 In.
- Exhaust Type: Single
- Muffler Type: Chambered
- Tip Logo: None
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message:
- Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Warning: Cancer And Reproductive Harm Www.p65warnings.ca.gov
- Exit Style: Straight
- Inlet Inside Diameter: 2.750 In.
- Outlet Outside Diameter: 2.750 In.
- Tail Pipe Material: Stainless Steel
- Tail Pipe Diameter: 2.750 In.
- Tip Diameter: 4.500 In.
- Exit Position: Dual Rear
- System Type: Axle Back
-
Features:
- Patented No Drone Reflective Sound Cancellation RSC Technology
- Custom Tuned - Aggressive Exhaust Note
- No Drone At Cruise
- 304 Stainless Steel Construction
- Flows Better Than Stock
- Dual Walled Polished Stainless Steel Tips
- Lighter Than Stock
- Easy Bolt-On Installation
- Detailed Printed Instructions Includes Full-Color Available Online
- No Welding Required
- Limited Lifetime Warranty
- Made in the U.S.A.
- CORSAs Patented Reflective Sound Cancellation(R) (RSC) Technology allows acoustic engineers to create a drone free exhaust sound, styled specifically to fit the personality of your vehicle. Each system is designed to increase vehicle performance, deliver an AGGRESSIVE SOUND under acceleration and a DRONE-FREE EXPERIENCE during cruise. Performance gains are not affected by sound choice.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2019 - Chevrolet Corvette | V | 6162 | 8 Cyl 6.2L | Z06 | 376 |
- Dual Rear Exit; 3.0 To 2.5 in. Dia.; Twin 4.0 in. Black Powder Coat Tips
- 3.0in.-2.5in. Cat-Back Dual Rear Exit Exhaust System with Twin 4.0in. Black Powder Coat Pro-Series® Tips
- Sport Cat-Back Exhaust System
- Product Attributes:
- Tubing Diameter: 3.000 In. - 2.500 In.
- Exhaust Type: Cat-back
- Exit Position: Dual Rear
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inlet Inside Diameter: 3.000 In. - 2.500 In.
-
Features:
- Patented No Drone Reflective Sound Cancellation RSC Technology
- Custom Tuned - Aggressive Exhaust Note
- 304 Stainless Steel Construction
- Easy Bolt-On Installation
- Made in the U.S.A.
- Limited Lifetime Warranty
- From the market leaders and originators of No Drone Exhaust Technology, the CORSA Performance 2019+ Chevrolet Silverado and GMC Sierra catback exhaust systems feature CORSA's Reflective Sound Cancellation(R) (RSC) No Drone Technology and allows CORSA's acoustic engineers to create an aggressive yet drone free exhaust note, styled specifically to fit the personality of these legendary GM Trucks. CORSA's catback exhaust system for GM's V8 trucks delivers a noticeable rumble at idle and an aggressive exhaust note under acceleration. CORSA's No Drone RSC(R) Technology provides the driver with the best-in-class, in-cabin driving experience by eliminating all drone inducing frequencies leavings a quiet cabin at cruise. Featuring a straight-through muffler design, 304 stainless steel construction, and a variety of tip and exit configurations, Nothing Compares to CORSA's exhaust line-up for GM's legendary trucks.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | Sub Model | Body | CID |
|---|---|---|---|---|---|---|---|
| 2019 - Chevrolet Silverado 1500 | V | 5328 | 8 Cyl 5.3L | 69.9 | WT | Crew Cab Pickup | 325 |
- Exhaust Pipe Flange Gasket
- FEL-PRO 61323 Exhaust Pipe Flange Gasket for Chevrolet Silverado 1500
- Product Attributes:
- Grade Type: Premium
-
Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
This Part Fits the Following OEM/Substitute Numbers:
15077362, 711362200, 711368100, EG24415, F31731
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2019 - Chevrolet Express 2500 | V | 5967 | Manifold To Front Pipe (Left) | 8 Cyl 6.0L | 364 |
- Quad Split Rear Exit For Vehicles with Factory Quad Exit Exhaust Excludes Vehicles with Ground Effects Package
- Competition Series Stainless Axle-Back System
- Competition Series Stainless Axle-Back System
- Product Attributes:
- Main Piping Diameter: 3
- Muffler Type: Straight-through
- Tip Diameter: 4
- Muffler Finish: Satin
- Muffler Size: 5x8x11
- Exit Style: Quad Split Rear
- Tip Length: 7
- Tip Type: Welded-on;double Wall;angle Cut;folded Edge
- Clamp Type: Band Clamp
- Inlet Connection Type: Clamp-on
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2019 - Chevrolet Camaro | V | 6162 | 8 Cyl 6.2L | 376 |
- Direct-Fit Muffler Replacement Kit Without Muffler
- Excludes Vehicles with Factory Performance Exhaust
- Direct-Fit Muffler Replacement Kit Without Muffler
- D-Fit Muffler Replacement Kit Without Muffler
- Product Attributes:
- Main Piping Diameter: 3.5
- Clamp Type: Band-clamp
- Muffler Quantity: 0
- Inlet Connection Type: Clamp-on
- Subtitle: Without Muffler
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2019 - Chevrolet Silverado 1500 | V | 6162 | 8 Cyl 6.2L | 376 |
- Dual Same Side Before Passenger Rear Tire Exit
- Street Series Stainless Cat-Back System
- Street Series Stainless Cat-Back System
- Product Attributes:
- Main Piping Diameter: 3
- Muffler Type: Straight-through
- Tip Diameter: 3.5
- Muffler Finish: Satin
- Exit Style: Dual Same Side Before Passenger Rear Tire
- Tip Length: 9.5
- Tip Type: Welded;double Wall;angle Cut;folded Edge
- Inlet Connection Type: Clamp-on
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2019 - Chevrolet Silverado 1500 LD | V | 5328 | 8 Cyl 5.3L | 325 |
Showing 1 - 10 of 306 products
Loading...