2022 Subaru Exhaust Parts

Choose a Model for your 2022 Subaru


Showing 1 - 10 of 40 products
Image
SKU
Product
Rating
Price

Borla
  • 2 in. Pipe; 3.5 x 2.75 in. Single Oval Rolled Angle Cut Tip; Truck Single Left Rear Exit; T-304 Stainless Steel;50 State Legal / California Emissions Compliant
  • S-Type Axle-Back Exhaust System; 2 in. Pipe; 3.5 x 2.75 in. Single Oval Rolled Angle Cut Tip; Truck Single Left Rear Exit; T-304 Stainless Steel;
  • S-Type Axle-Back Exhaust System
  • Product Attributes:
    • Tail Pipe Diameter: 2.000 In.
    • Tubing Diameter: 2.000 In.
    • Exhaust Type: Axle-back
    • Exit Position: Single Rear
    • Tip Diameter: 2.000 In.
    • WARNING CA Proposition 65: Yes
    • Inlet Inside Diameter: 2.000 In.
  • Features:
    • Made From High-Quality T-304 Austenitic Stainless Steel
    • Mandrel Bent Pipes
    • Ensures Consistent Diameter Through Each Curve
    • Mufflers Have No Baffles/Chambers
    • Produces High Velocity
    • Million Mile Warranty
  • Borla Performance has once again proven why we have a led the aftermarket performance exhaust industry for over 40 years. Borla Performance Industries; the original pioneers of high quality; austinetic stainless steel free flow exhaust utilizes patented award and race winning technology to deliver quality, sound, performance gains, and enhanced fuel economy. All with an easy bolt on installation. All Borla street products carry an unsurpassed written million-mile warranty.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
2022 - Subaru Outback H 2498 4 Cyl 2.5L Touring 152

Borla
  • 3 in. Split Into Dual 2.25 in. Into Muffler; 3.5 in. Tip; Dual Split Rear Exit; T-304 Stainless Steel
  • S-Type Cat-Back™ Exhaust System; 3 in. Split Into Dual 2.25 in. Into Muffler; 3.5 in. Tip; Dual Split Rear Exit; T-304 Stainless Steel;
  • S-Type Cat-Back™ Exhaust System
  • Product Attributes:
    • Tail Pipe Diameter: 3.000 In. - 2.250 In.
    • Tubing Diameter: 3.00 In. / 2.25 In.
    • Exhaust Type:
      • Axle-back
      • Cat-back
    • Exit Position: Dual Split Rear
    • WARNING CA Proposition 65: Yes
  • Features:
    • Straight-Through Technology
    • Aggressive
    • Added Performance
    • Distinctive Motorsport Styling
    • Easy Bolt On Installation
    • Enhanced Fuel Economy
    • Million Mile Warranty
  • This BORLA(R) Cat-Back(TM) system is tuned for performance and sound for the 2.4L engine in the WRX. Our S-Type sound level is designed to bring out the Subaru engine rumble and provides an aggressive sound without any drone. This system features 3.5 in. quad polished T-304 stainless steel tips, but is also available with Ceramic Black on T-304 stainless steel tips. For ease of installation, this Cat-Back(TM) is a direct bolt on part and does not require cutting. Like all BORLA(R) exhaust products, each system is handmade in the USA by master craftspeople and features premium, high-quality T-304 austenitic stainless steel construction. Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer numerical control (CNC) manufacturing ensures an accurate fit. Best of all it features a Million-Mile Warranty.

Additional Fitment Information:
Vehicle
2022 - Subaru WRX

Borla
  • 3 in. Split Into Dual 2.25 in. Into Muffler; 3.5 in. Tip; Dual Split Rear Exit; Ceramic Black
  • S-Type Cat-Back™ Exhaust System; 3 in. Split Into Dual 2.25 in. Into Muffler; 3.5 in. Tip; Dual Split Rear Exit; Ceramic Black;
  • S-Type Cat-Back™ Exhaust System
  • Product Attributes:
    • Tail Pipe Diameter: 3.000 In. - 2.250 In.
    • Tubing Diameter: 3.00 In. / 2.25 In.
    • Exhaust Type:
      • Axle-back
      • Cat-back
    • Exit Position: Dual Split Rear
    • WARNING CA Proposition 65: Yes
  • Features:
    • Straight-Through Technology
    • Aggressive
    • Added Performance
    • Distinctive Motorsport Styling
    • Easy Bolt On Installation
    • Enhanced Fuel Economy
    • Million Mile Warranty
  • This BORLA(R) Cat-Back(TM) system is tuned for performance and sound for the 2.4L engine in the WRX. Our S-Type sound level is designed to bring out the Subaru engine rumble and provides an aggressive sound without any drone. This system features 3.5 in. quad Ceramic Black on T-304 stainless steel tips, but is also available with polished T-304 stainless steel tips. For ease of installation, this Cat-Back(TM) is a direct bolt on part and does not require cutting. Like all BORLA(R) exhaust products, each system is handmade in the USA by master craftspeople and features premium, high-quality T-304 austenitic stainless steel construction. Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer numerical control (CNC) manufacturing ensures an accurate fit. Best of all it features a Million-Mile Warranty.

Additional Fitment Information:
Vehicle
2022 - Subaru WRX

Nippon Reinz
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Cylinder Head to Pre-Converter

Additional Fitment Information:
Vehicle Aspiration
2022 - Subaru Outback Naturally Aspirated

Nippon Reinz
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Cylinder Head to Pre-Converter

Additional Fitment Information:
Vehicle Aspiration
2022 - Subaru Legacy Naturally Aspirated

Nippon Reinz
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Cylinder Head to Pre-Converter

Additional Fitment Information:
Vehicle
2022 - Subaru Crosstrek

Ishino Stone
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Main Converter to Exhaust Pipe

Additional Fitment Information:
Vehicle Position
2022 - Subaru WRX Center

MBRP Exhaust
  • 3 in.; Single Rear Exit; T304 Stainless Steel; 5 in. Burnt End Tips;Meets EPA Standards
  • Armor Pro Cat Back Performance Exhaust System; 3 in.; Single Rear Exit; T304 Stainless Steel; 5 in. Burnt End Tips;
  • Armor Pro Cat Back Performance Exhaust System
  • Product Attributes:
    • Exhaust Type: Cat Back
    • Exit Position: Single Rear
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Nickel (metallic) And Chromium (hexavalent Compounds) Which Are Known To The State Of California To Cause Cancer And Birth Defects; Or Other Reproductive Harm
  • Features:
    • Improved Torque And Horsepower
    • Lower Exhaust Gas Temperatures
    • Increased Throttle Response
    • Bolt On Design
    • Utilizes OEM Hangers
  • THE ONLY EXHAUST YOU'LL EVER NEED - MBRP ARMOR PRO Series exhaust systems are backed by a Lifetime Warranty and crafted out of T304Stainless Steel - the most durable material grade that money can buy. The T304 Stainless Steel tubing is easy to clean and maintain. It's the obvious choice for you if you operate your vehicle in extreme conditions. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine's cylinders, allowing it to produce more power and improve vehicle performance and longevity. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.

Additional Fitment Information:
Vehicle
2022 - Subaru BRZ

MBRP Exhaust
  • 2.5 in.; Dual Split Rear; 5 in. Burnt End Tips; 304 Stainless Steel;Meets EPA Standards
  • Armor Pro Axle Back Exhaust System; 2.5 in.; Dual Split Rear; 5 in. Burnt End Tips; 304 Stainless Steel;
  • Armor Pro Axle Back Exhaust System
  • Product Attributes:
    • Tail Pipe Diameter: 2.500 In.
    • Tubing Diameter: 2.500 In.
    • Exhaust Type: Axle-back
    • Exit Position: Dual Split Rear
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Nickel (metallic) And Chromium (hexavalent Compounds) Which Are Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm
    • Inlet Inside Diameter: 2.500 In.
  • Features:
    • Axle Back Exhaust System
  • THE ONLY EXHAUST YOU'LL EVER NEED - MBRP ARMOR PRO Series exhaust systems are backed by a Lifetime Warranty and crafted out of T304Stainless Steel - the most durable material grade that money can buy. The T304 Stainless Steel tubing is easy to clean and maintain. It's the obvious choice for you if you operate your vehicle in extreme conditions. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine's cylinders, allowing it to produce more power and improve vehicle performance and longevity. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.

Additional Fitment Information:
Vehicle
2022 - Subaru BRZ

MBRP Exhaust
  • 2.5 in.; Dual Split Rear; 5 in. Carbon Fiber Tips; 304 Stainless Steel;Meets EPA Standards
  • Armor Pro Axle Back Exhaust System; 2.5 in.; Dual Split Rear; 5 in. Carbon Fiber Tips; 304 Stainless Steel;
  • Armor Pro Axle Back Exhaust System
  • Product Attributes:
    • Tail Pipe Diameter: 2.500 In.
    • Tubing Diameter: 2.500 In.
    • Exhaust Type: Axle-back
    • Exit Position: Dual Split Rear
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Nickel (metallic) And Chromium (hexavalent Compounds) Which Are Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm
    • Inlet Inside Diameter: 2.500 In.
  • Features:
    • Axle Back Exhaust System
  • THE ONLY EXHAUST YOU'LL EVER NEED - MBRP ARMOR PRO Series exhaust systems are backed by a Lifetime Warranty and crafted out of T304Stainless Steel - the most durable material grade that money can buy. The T304 Stainless Steel tubing is easy to clean and maintain. It's the obvious choice for you if you operate your vehicle in extreme conditions. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine's cylinders, allowing it to produce more power and improve vehicle performance and longevity. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.

Additional Fitment Information:
Vehicle
2022 - Subaru BRZ
Showing 1 - 10 of 40 products

Loading...