Image
Product
Price
- Cut to fit
- 90 Degree Molded Heater Hose
- Product Attributes:
- Molded: Yes
- Centerline Length:
- 16
- 406
- End 1 Inside Diameter:
- .625
- 16
- Angle: 90
- Arm Length:
- 102
- 305
- 4
- Material: Epdm
- End 2 Inside Diameter:
- .625
- 16
- Quick Connect Fitting Quantity: 0
-
Features:
- Resists electrochemical degradation and water permeation
- Use with heater hose connectors and bulk heater hose to create custom assemblies
- Compatible for coolant, air and water applications
- EPDM tube and cover, synthetic fiber reinforcement
- SAE 20R3 EC Class D1, SAE 20R4 EC Class D1
- Temperature Range: -40 Deg. F to +275 Deg. F (-40 Deg. C to +135 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- It can be difficult to find hoses that easily adapt to sharp bends in your assemblies. Gates created a 90 Degree Molded Heater Hose to make replacing hoses with existing sharp bends easy. Conveniently, our 38 sizes handle thousands of applications and are built to last.
This Part Fits the Following OEM/Substitute Numbers:
10007473, 10014215, 10014330, 10014332, 10014672, 1007473, 10157913, 118658, 14052460, 14052473, 14100798, 15555229, 15642507, 1594657, 15963868, 15963869, 16198M, 1641237...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1987 - Mazda RX-7 | R | 1308 | Pipe To Engine | GAS | 2 Cyl 1.3L | - |
- Cut to fit
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 244
- 9.6
- End 1 Inside Diameter:
- .25
- 6
- Material: Epdm
- End 2 Inside Diameter:
- .25
- 6
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0K24715281D, 10010, 1319171C50, 1319172C50, 14000S, 1405453F11, 15802763, 1626111060, 1626764010, 1734376010, 18010, 19130290, 19130424, 19524P5A000, 19528P3FA50, 22633443, 22717008, 22733960...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1987 - Mazda 323 | L | 1597 | Intake Manifold To Throttle Body | GAS | 4 Cyl 1.6L | - |
Additional Fitment Information:
| Vehicle | Body |
|---|---|
| 1987 - Mazda 323 | Wagon |
- If possible check the old motors OE # in the X-Ref file. Threaded shaft.
- Motor Only
- A/C & Heater
Additional Fitment Information:
| Vehicle |
|---|
| 1987 - Mazda B2000 |
- This receiver-drier inlet and outlet fittings opposite (180°) from each other.
Additional Fitment Information:
| Vehicle | Aspiration |
|---|---|
| 1987 - Mazda RX-7 | Turbocharged |
- W/ Factory A/C
- This receiver-drier inlet and outlet fittings opposite (180°) from each other.
Additional Fitment Information:
| Vehicle | Aspiration |
|---|---|
| 1987 - Mazda RX-7 | Naturally Aspirated |
- Cut to Length, 3"
- Straight Heater Hose (Standard)
- Product Attributes:
- Molded: No
- Working Pressure: 60
- Weight Per Length: 11.70 Lbs./carton
- Centerline Length:
- 15.24
- 15240
- 600
- End 1 Inside Diameter:
- .625
- 16
- Material: Epdm
- End 2 Inside Diameter:
- .625
- 16
-
Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0K55261B16C, 0K55261B22F, 10023264, 10230417, 10427731, 12322342, 12368235, 12575636, 12600099, 12604941, 12639709, 12639710, 14055JK20A, 15024548, 15051852, 15051853, 15064188, 15064189...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1987 - Mazda B2600 | L | 2555 | Pipe-3 To Throttle Body | GAS | 4 Cyl 2.6L | 156 |
- Product Attributes:
- : .63
- End 1 Inside Diameter: .63
- Type: Single
This Part Fits the Following OEM/Substitute Numbers:
0K30E-61-212A, 10007473, 10145102, 10284268, 10284269, 10888, 11290, 11377, 11498, 14100798, 14494S, 16198M, 16328M, 16382M, 1641237, 17856-86Z00, 18060L, 18888...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1987 - Mazda 626 | Heater Hose |
- Product Attributes:
- : .63
- End 1 Inside Diameter: .63
- Type: Single
Additional Fitment Information:
| Vehicle | Position | Aspiration |
|---|---|---|
| 1987 - Mazda RX-7 | Pipe To Engine | Turbocharged |
- Cut to fit
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 244
- 9.6
- End 1 Inside Diameter: .31
- Material: Epdm
- End 2 Inside Diameter: .31
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0935270131600, 10020, 10036781, 12637185, 14001S, 1405557Y12, 14055D4200, 140560B000, 140560B001, 140560S310, 1405610V11, 1405630P21, 1405630P24, 1405630R16, 1405640F04, 1405640F12, 1405653J07, 1405653J09...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | Aspiration | CID |
|---|---|---|---|---|---|---|---|
| 1987 - Mazda RX-7 | R | 1308 | Throttle Body To Intake Manifold | GAS | 2 Cyl 1.3L | Turbocharged | - |
Showing 1 - 10 of 11 products
Loading...