Image
Product
Price
- Cut to fit
- 90 Degree Molded Heater Hose
- Product Attributes:
- Molded: Yes
- Centerline Length: 254
- End 1 Inside Diameter:
- .75
- 19
- Angle: 90
- Arm Length:
- 102
- 152
- 4
- 6
- Material: Epdm
- End 2 Inside Diameter:
- .75
- 19
- Quick Connect Fitting Quantity: 0
-
Features:
- Resists electrochemical degradation and water permeation
- Use with heater hose connectors and bulk heater hose to create custom assemblies
- Compatible for coolant, air and water applications
- EPDM tube and cover, synthetic fiber reinforcement
- SAE 20R3 EC Class D1, SAE 20R4 EC Class D1
- Temperature Range: -40 Deg. F to +275 Deg. F (-40 Deg. C to +135 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- It can be difficult to find hoses that easily adapt to sharp bends in your assemblies. Gates created a 90 Degree Molded Heater Hose to make replacing hoses with existing sharp bends easy. Conveniently, our 38 sizes handle thousands of applications and are built to last.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
10017940, 10065640, 10065675, 10120065, 10135307, 10145119, 10188037, 10218423, 10227419, 10385281, 10441374, 1405531U00, 1405646R00, 1405670F05, 14244S, 15077061, 15123654, 15258060...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1996 - INFINITI I30 | V | 2988 | Pipe-1 To Pipe-3 | GAS | 6 Cyl 3.0L | 182 |
Additional Fitment Information:
| Vehicle |
|---|
| 1996 - INFINITI J30 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Production: 03/1995-
- This o-ring seals the joint between the heater core body and the plastic inlet or outlet hose connector. Use one o-ring per connector (2 per heater core).
Additional Fitment Information:
| Vehicle | Prod. Date Range |
|---|---|
| 1996 - INFINITI I30 | Fr:03-00-95 |
Additional Fitment Information:
| Vehicle |
|---|
| 1996 - INFINITI I30 |
Additional Fitment Information:
| Vehicle |
|---|
| 1996 - INFINITI G20 |
- New with Clutch
- Production: -05/31/1996, with Clutch; Compressor = Calsonic CWV618
- There has been some disagreement with the OE Nissan parts catalog and the compressor actually installed on the vehicle. To be assured of the correct compressor, we recommend measuring the suction port before ordering. If the dimensions = 18.6mm (0.73") dia. and 10.3mm (0.41") stepped depth use compressor #92600-40U01. If dimensions = 21.3mm (0.84") dia. and 10.8mm (0.43") depth (no step), use compressor #92600-2Y01C. If dimensions = 20.8mm (0.82") dia. and 15.1mm (0.59") depth use compressor 92600-2Y01B.
- W/ Clutch
Additional Fitment Information:
| Vehicle | Prod. Date Range |
|---|---|
| 1996 - INFINITI I30 | To:05-31-96 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Most aftermarket heater cores require that the inlet and outlet hose connectors from the old core be removed and reinstalled on the replacement heater core. The o-rings between the hose connectors and the heater core are not included with the aftermarket heater core; order 2 of heater core o-ring #92232-71L00 separately if needed for this purpose.
- with Connector Pipes
Additional Fitment Information:
| Vehicle |
|---|
| 1996 - INFINITI I30 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Production: -08/1995
Additional Fitment Information:
| Vehicle | Prod. Date Range |
|---|---|
| 1996 - INFINITI J30 | To:08-00-95 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Production: -06/30/1996
- Fan Control Amplifier
Additional Fitment Information:
| Vehicle | Prod. Date Range |
|---|---|
| 1996 - INFINITI Q45 | To:06-30-96 |
- Cut to fit
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 244
- 9.6
- End 1 Inside Diameter: .31
- Material: Epdm
- End 2 Inside Diameter: .31
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0935270131600, 10020, 10036781, 12637185, 14001S, 1405557Y12, 14055D4200, 140560B000, 140560B001, 140560S310, 1405610V11, 1405630P21, 1405630P24, 1405630R16, 1405640F04, 1405640F12, 1405653J07, 1405653J09...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1996 - INFINITI J30 | V | 2960 | Pipe-2 To Pipe-3 | GAS | 6 Cyl 3.0L | 181 |
Showing 1 - 10 of 25 products
Loading...