Image
Product
Price
- Cut to Fit
- Small I.D. Heater Hose
- Product Attributes:
- : .38
- Centerline Length: 12.50
- End 1 Inside Diameter: .38
- Type: Single
This Part Fits the Following OEM/Substitute Numbers:
10031, 14056-30R60, 14056-V5007, 16002M, 16264-76040, 18031, 303001, 4364, 63101, D87001
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2002 - Honda Passport | Throttle Body To Pipe-4 |
- NEW COMPRESSOR W/ CLUTCH
- DENSO is the OE supplier for this vehicle; OE-specified O-rings and Oil included. OE
- New A/C Compressor
- A/C Compressor with Clutch - New
- Product Attributes:
- Refrigerant Type: R134a
- Pulley Belt Type: Serpentine
- Mounting Type: Bolt Tangent
- Clutch Maximum Diameter: 135.0
- As one of the world’s largest OE suppliers of A/C compressors, DENSO units are specified by most major vehicle manufacturers. DENSO First Time Fit A/C compressors are manufactured and tested to the strictest OE standards for unparalleled performance. At DENSO, we bring together everything we know as an air conditioning systems manufacturer to bring you the highest quality line of factory-new compressors available. When it comes to new compressors, you can't do better than going with a unit manufactured by the OE supplier. At DENSO, we know these units better than anyone because we originally designed them. Our compressors are built to meet DENSO’s unsurpassed reputation for technological superiority. You can relax knowing DENSO will give you the right part and the right fit, the first time.
This Part Fits the Following OEM/Substitute Numbers:
000025, 06388-P8F-505RM, 10000664, 15-21227, 20-11255, 2336, 254415, 274520, 29-5937N, 38800P8FA01, 38810P8FA01, 447170-8486, 4711276, 5511855, 638816, 638844, 6511855, 7511855...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2002 - Honda Odyssey |
- NEW COMPRESSOR W/ CLUTCH
- OE recommended replacement part. OE-specified Oil included.
- New A/C Compressor
- A/C Compressor with Clutch - New
- Product Attributes:
- Refrigerant Type: R134a
- Pulley Belt Type: Serpentine
- Mounting Type: Bolt Tangent
- Clutch Maximum Diameter: 109.0
- As one of the world’s largest OE suppliers of A/C compressors, DENSO units are specified by most major vehicle manufacturers. DENSO First Time Fit A/C compressors are manufactured and tested to the strictest OE standards for unparalleled performance. At DENSO, we bring together everything we know as an air conditioning systems manufacturer to bring you the highest quality line of factory-new compressors available. When it comes to new compressors, you can't do better than going with a unit manufactured by the OE supplier. At DENSO, we know these units better than anyone because we originally designed them. Our compressors are built to meet DENSO’s unsurpassed reputation for technological superiority. You can relax knowing DENSO will give you the right part and the right fit, the first time.
This Part Fits the Following OEM/Substitute Numbers:
15-22071, 20-04914, 254477, 275783, 38810PLMA11, 38810PLMA12, 4717051, 4914, 5511266, 638854, 6511266, 77552, 77613, 78613
Additional Fitment Information:
| Vehicle |
|---|
| 2002 - Honda Civic |
- Original Equipment Part Number 80291S84A01
This Part Fits the Following OEM/Substitute Numbers:
224752, 24752, 4752, 500527492, 61624782, 817, 90008PT, 94782, AF1011, AFC1401, AQ1007, C15390, C15390P, CAF1708, CAF5390, CCF7708, CF1013, CF113...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2002 - Honda Accord | V | 2997 | Canada | 6 Cyl 3.0L | - |
- PRO-TEC Cabin Air Panel
- Product Attributes:
- Inner Diameter Top: Closed
- Duty Type: Ld
- Media Material: Particulate
- Class: D
- Protec Cabin Air Filters remove pollen, dust, soot and other air borne contaminates from the air inside a passenger vehicle or light truck for everyday normal driving conditions. Where applicable, combination odor removing media reduces odors from the exhaust systems of nearby vehicles. WIX cabin air filters are recommended for the traditional cabin air filter change interval.
This Part Fits the Following OEM/Substitute Numbers:
07080, 224897, 24897, 4897, 500528622, 61624897, 836, 89897, 94897, AF1204, AFC1204, AQ1054, C45459, C45459P, CAF1770, CAF5459, CAF7770, CCF7770...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2002 - Honda Odyssey | V | 3474 | Canada | 6 Cyl 3.5L | - |
- Heater Hose Standard
- Product Attributes:
- : .63
- End 1 Inside Diameter: .63
- Type: Single
This Part Fits the Following OEM/Substitute Numbers:
28401, 28411, 30124, 65004, 65023, H153
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2002 - Honda Accord | L | 2254 | Valve To Heater | 4 Cyl 2.3L | - |
- Protective sleeve required; Cut to fit
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 15.6
- 396
- End 1 Inside Diameter: .38
- Material: Epdm
- End 2 Inside Diameter: .38
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
This Part Fits the Following OEM/Substitute Numbers:
10031, 1405630R60, 14056V5007, 16002M, 1626476040, 18031, 63101, 87001, 8971362192, D87001, F5RZ 8B081 C, F5RZ 8B081 D, F6DE 8C633 AB, F8RZ 8B081 EA, MD103789, YF1Z 8C633 AA
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2002 - Honda Passport | V | 3165 | Throttle Body To Pipe-4 | GAS | 6 Cyl 3.2L | - |
- Condenser Fan Assembly Without Controller
- Product Attributes:
- Shroud Material:
- Acero Estampado
- Acier Estampé
- Stamped Steel
- Connector Quantity:
- 1
- 1 Ensamble De Manguera Del Calentador
- Contenidos del paquete: 1 Ensamble De Ventilador Del Condensador
- Terminal Quantity: 2
- Blade Material:
- Plastic
- Plástico
- Shroud Included:
- Oui
- Sí
- Yes
- Shroud Material:
-
Features:
- Ideal replacement - this air conditioner condenser fan assembly is engineered to match the fit and performance of the stock condenser fan on specific vehicles
- Complete package - assembly is designed with the same materials and components as the original part
- Quality assured - components are tested in laboratory settings to ensure performance
- Cost effective and reliable - trustworthy manufacturing for far less than same part at the dealership
- This A/C condenser fan assembly is precision-engineered to match the fit and performance of the stock condenser fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it functions as effectively as the original part.
This Part Fits the Following OEM/Substitute Numbers:
38611P8CA01, 38615P8CA00, 38616P8CA01, 610710, 75572, CF18010, FA70246
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2002 - Honda Accord | V | 2997 | 6 Cyl 3.0L | - |
- Cut to Length, 3"
- Straight Heater Hose (Standard)
- Product Attributes:
- Molded: No
- Working Pressure: 60
- Weight Per Length: 11.70 Lbs./carton
- Centerline Length:
- 15.24
- 15240
- 600
- End 1 Inside Diameter:
- .625
- 16
- Material: Epdm
- End 2 Inside Diameter:
- .625
- 16
-
Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0K55261B16C, 0K55261B22F, 10023264, 10230417, 10427731, 12322342, 12368235, 12575636, 12600099, 12604941, 12639709, 12639710, 14055JK20A, 15024548, 15051852, 15051853, 15064188, 15064189...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2002 - Honda Accord | L | 2254 | Heater Control Valve To Heater Inlet | GAS | 4 Cyl 2.3L | - |
- Condenser Fan Assembly Without Controller
- Product Attributes:
- Shroud Material:
- Acero Estampado
- Acier Estampé
- Stamped Steel
- Connector Quantity:
- 1
- 1 Ensamble De Manguera Del Calentador
- Contenidos del paquete: 1 Ensamble De Ventilador Del Condensador
- Terminal Quantity: 2
- Blade Material:
- Plastic
- Plástico
- Shroud Included:
- Oui
- Sí
- Yes
- Shroud Material:
-
Features:
- Ideal replacement - this air conditioner condenser fan assembly is engineered to match the fit and performance of the stock condenser fan on specific vehicles
- Complete package - assembly is designed with the same materials and components as the original part
- Quality assured - components are tested in laboratory settings to ensure performance
- Cost effective and reliable - trustworthy manufacturing for far less than same part at the dealership
- This A/C condenser fan assembly is precision-engineered to match the fit and performance of the stock condenser fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it functions as effectively as the original part.
This Part Fits the Following OEM/Substitute Numbers:
38611P8FA01, 38615P8FA00, 38616P8FA01, 610410, 75294, CF18024, FA70167
Additional Fitment Information:
| Vehicle |
|---|
| 2002 - Honda Odyssey |
Showing 1 - 10 of 279 products
Loading...