Image
Product
Price
- NEW COMPRESSOR W/ CLUTCH
- with Rear A/C DENSO is the OE supplier for this vehicle; OE-specified Oil included.
- New A/C Compressor
- As one of the world’s largest OE suppliers of A/C compressors, DENSO units are specified by most major vehicle manufacturers. DENSO First Time Fit A/C compressors are manufactured and tested to the strictest OE standards for unparalleled performance. At DENSO, we bring together everything we know as an air conditioning systems manufacturer to bring you the highest quality line of factory-new compressors available. When it comes to new compressors, you can't do better than going with a unit manufactured by the OE supplier. At DENSO, we know these units better than anyone because we originally designed them. Our compressors are built to meet DENSO’s unsurpassed reputation for technological superiority. You can relax knowing DENSO will give you the right part and the right fit, the first time.
This Part Fits the Following OEM/Substitute Numbers:
001138, 10000631, 10364873, 12624430, 12647259, 15-20941, 15-21127, 15068854, 15081861, 15100337, 15100338, 15169964, 15169965, 15707611, 1869N, 19130450, 20-21711, 254471...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2003 - Hummer H2 |
- New Nippondenso 10S20F Compressor with Clutch
- ; with 10S20F Compressor New with Clutch w/o Rear AC May Require use of OE Manifold; DeSlugger Recommended to Eliminate Compressor Damage on Vehicles with Low Mount Compressor
- New Nippondenso 10S20F Compressor with Clutch
- New Compressor
- Product Attributes:
- : 4.250
- Compatible Refrigerant Oil Type: Pag 46
- Refrigerant Type: R134a
- Clutch Included: Yes
- New or Reman: New
- Discharge Port Type: Sealing Washer
- Printed Foot Note: May Require Use Of Oe Manifold; Deslugger [36141] Recommended To Eliminate Compressor Damage On Vehicles With Low Mount Compressor
- Suction Port Type: Sealing Washer
- Mounting Hardware?: Not Included
- O-Ring B Number/Desc: [24402] / Slimline Washer
- O-Ring A Number/Desc: [24404] / Slimline Washer
- Pulley Diameter MM: 107.950
- Compressor Type: 10s20f
- Pulley Belt Type: Serpentine
- Pulley Groove Quantity: 4
- Terminal Type: Pin
- Mount Distance MM: 16.510
- Distance From Clutch To Mounting Flange: 0.65625
- Coil Clock Position: Wire Lead
- Mounting Type: Tangent Mount
- Pulley Ridge Diameter: 4.250
- Clutch Maximum Diameter: 4.250
- Pulley Lip Diameter: 4.250
Additional Fitment Information:
| Vehicle |
|---|
| 2003 - Hummer H2 |
- New Nippondenso 10S20F Compressor with Clutch
- ; with 10S20F Compressor New with Clutch with Rear AC May Require use of OE Manifold; DeSlugger Recommended to Eliminate Compressor Damage on Vehicles with Low Mount Compressor New Part
- New Nippondenso 10S20F Compressor with Clutch
- New Compressor
- Product Attributes:
- : 4.250
- Compatible Refrigerant Oil Type: Pag 46
- Refrigerant Type: R134a
- Clutch Included: Yes
- New or Reman: New
- Discharge Port Type: Sealing Washer
- Printed Foot Note: May Require Use Of Oe Manifold; Deslugger [36141] Recommended To Eliminate Compressor Damage On Vehicles With Low Mount Compressor
- Suction Port Type: Sealing Washer
- Mounting Hardware?: Not Included
- O-Ring B Number/Desc: [24402] / Slimline Washer
- O-Ring A Number/Desc: [24404] / Slimline Washer
- Pulley Diameter MM: 107.950
- Compressor Type: 10s20f
- Pulley Belt Type: Serpentine
- Pulley Groove Quantity: 4
- Terminal Type: Pin
- Mount Distance MM: 16.510
- Distance From Clutch To Mounting Flange: 0.65625
- Coil Clock Position: Wire Lead
- Mounting Type: Tangent Mount
- Pulley Ridge Diameter: 4.250
- Clutch Maximum Diameter: 4.250
- Pulley Lip Diameter: 4.250
This Part Fits the Following OEM/Substitute Numbers:
031867, 032057, 034279N, 034279ND, 034810N, 034810ND, 035126N, 035126ND, 035127N, 035127ND, 0610081, 10000631, 10364873, 10366545, 11178377, 1420940, 1421127AFT, 1421127NEW...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2003 - Hummer H2 |
- Molded Coolant Hose
- Product Attributes:
- Modular Components: Branch
- Modular Hose: Yes
- End 3 Inside Diameter: .63
- End 4 Inside Diameter:
- .63
- 16
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 16
- 19.1
- 485
- End 1 Inside Diameter: 25
- End 2 Inside Diameter:
- .75
- 19
- Quick Connect Fitting Quantity: 0
This Part Fits the Following OEM/Substitute Numbers:
10367225, 15005677, 15032528, 15039023, 15051847, 15051850, 15058002, 15059576, 15059577, 15128150, 15792821, 15792822, 15834772, 15834773, 15854959, 18221L, 21994332, 22554...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2003 - Hummer H2 | V | 5967 | Heater To Tank | GAS | 8 Cyl 6.0L | 364 |
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 122
- 4.8
- End 1 Inside Diameter:
- .25
- 6
- End 2 Inside Diameter:
- .25
- 6
- Quick Connect Fitting Quantity: 0
This Part Fits the Following OEM/Substitute Numbers:
10623, 12570528, 14754S, 18623, 86504
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2003 - Hummer H2 | V | 5967 | Throttle Body To Engine | GAS | 8 Cyl 6.0L | 364 |
Additional Fitment Information:
| Vehicle |
|---|
| 2003 - Hummer H2 |
- Cut to fit
- 90 Degree Molded Heater Hose
- Product Attributes:
- Molded: Yes
- Centerline Length:
- 10
- 254
- End 1 Inside Diameter:
- .625
- 16
- Arm Length:
- 102
- 152
- 4
- 6
- End 2 Inside Diameter:
- .625
- 16
- Quick Connect Fitting Quantity: 0
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0032224, 027004156, 05743507, 06006269, 07HS00043A, 07HS00044A, 0K01315421, 10002473, 10006390, 10018899, 10021318, 10038502, 10060964, 10065741, 10080395, 10135305, 10135333, 10145098...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2003 - Hummer H1 | V | - | Valve To Engine | DIESEL | 8 Cyl 6.5L | 395 |
- Cut to Length, 80"
- Straight Heater Hose (Standard)
- Product Attributes:
- Molded: No
- Working Pressure: 60
- Weight Per Length: 11.70 Lbs./carton
- Centerline Length:
- 15.24
- 15240
- 50
- 600
- End 1 Inside Diameter:
- .625
- 16
- End 2 Inside Diameter:
- .625
- 16
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0K55261B16C, 0K55261B22F, 10023264, 10230417, 10427731, 12322342, 12368235, 12575636, 12600099, 12604941, 12639709, 12639710, 14055JK20A, 15024548, 15051852, 15051853, 15064188, 15064189...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2003 - Hummer H1 | V | - | Engine To Auxiliary Heater | DIESEL | 8 Cyl 6.5L | 395 |
- Cut to Length, 80"
- Straight Heater Hose (Standard)
- Product Attributes:
- Molded: No
- Working Pressure: 60
- Weight Per Length: 11.70 Lbs./carton
- Centerline Length:
- 15.24
- 15240
- 50
- 600
- End 1 Inside Diameter:
- .625
- 16
- End 2 Inside Diameter:
- .625
- 16
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2003 - Hummer H1 | V | - | Auxiliary Heater To Engine | DIESEL | 8 Cyl 6.5L | 395 |
- Cut to Length, 33"
- Straight Heater Hose (Standard)
- Product Attributes:
- Molded: No
- Working Pressure: 60
- Weight Per Length: 11.70 Lbs./carton
- Centerline Length:
- 15.24
- 15240
- 50
- 600
- End 1 Inside Diameter:
- .625
- 16
- End 2 Inside Diameter:
- .625
- 16
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2003 - Hummer H2 | V | 5967 | Heater To Thermostat | GAS | 8 Cyl 6.0L | 364 |
Showing 1 - 10 of 31 products
Loading...