Image
Product
Price
- System Mounted Pressure Transducer
- System Mounted Pressure Transducer
- Pressure Switch
- Product Attributes:
- Item Included A Qty.: 1
- Comp Open/Closed: Variable
- Connector Gender: Female
- Fitting Thread Size: M10 X 1.25
- Harness Connector: 37235 / Harness Connector
- Meets / Exceeds OEM?: Yes
- Mnt Sys Loc: System Mounted
- Connector Shape: Round
- Item Included A Desc: 24606
- Description: Switch-pressure /system Mount
- Fitting Gender: Female
- Type: Transducer
- Material: Plastic / Metal
-
Features:
- Vehicle specific applications
- Color coded for easy identification
- Zinc coated to resist corrosion
- Contains gaskets, o-rings, or seals to properly replace the product
- Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Four Seasons.
This Part Fits the Following OEM/Substitute Numbers:
01458650, 11120915, 11120988, 13502758, 13502759, 13587668, 1550147, 1551258, 1551289, 1551342, 1551343, 1557, 155884, 1711513, 1PS1031, 207446, 207799, 20915...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2010 - Hummer H3 |
- Denso 10S20F Compressor
- with 10S20F Compressor New with Clutch Replacement of Stretch Fit Belt is Required with 4 Groove Pulley with 4-1/4" Diameter Pulley May Require use of OE Manifold. DeSlugger Recommended to Eliminate Compressor Damage on Vehicles with Low Mount Compressor Replacement of Stretch Fit Belt is Required
- Denso 10S20F Compressor
- New Compressor
- Product Attributes:
- O-Ring A Quantity: 1
- Refrigerant Type: R134a
- Clutch Included: Included
- Coil Clock: 1 Wire Lead
- New or Reman: New
- Groove: 4
- Discharge Port Type: Sealing Washer
- Model: 10s20f
- Pulley Diameter IN: 4.250
- Switch Type: N/a
- Suction Port Type: Sealing Washer
- Electronic Control Valve: No
- Mounting Hardware?: Not Included
- O-Ring B Number/Desc: 24402 / Slimline Washer
- O-Ring B Quantity: 1
- Part Note: May Require Use Of Oe Manifold; Deslugger 36141 Recommended To Eliminate Compressor Damage On Vehicles With Low Mount Compressor
- O-Ring A Number/Desc: 24404 / Slimline Washer
- Oil Type: Pag 46
- Pulley Diameter MM: 107.95
- Mount Distance IN: 0.66
- Mount Distance MM: 16.51
- Type: Denso
- Belt Type: Serpentine
-
Features:
- Manufactured Compressors come pre-charged with 3 ounces of PAG oil for R134a or R1234yf applications
- Manufactured Compressors come with the R12/R134A/1234yf required O-rings /sealing washers to install the compressor
- Manufactured Compressors meet or exceed OE specifications
- Manufactured Compressors are individually vacuum,pressure, and Helium Mass Spectrometer tested to ensure no leaks
- Manufactured Compressors are validated for the equivalent of 100,000 miles
- Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Four Seasons.
This Part Fits the Following OEM/Substitute Numbers:
031867, 032057, 034279N, 034279ND, 034810N, 034810ND, 035126N, 035126ND, 035127N, 035127ND, 0610081, 10000631, 10364873, 10366545, 11178377, 1420940, 1421127AFT, 1421127NEW...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2010 - Hummer H3 | V | 5328 | 8 Cyl 5.3L | 325 |
- Denso 10S20F Compressor
- with 10S17C Compressor New with Clutch Replacement of Stretch Fit Belt is Required May Require use of OE Manifold. DeSlugger Recommended to Eliminate Compressor Damage on Vehicles with Low Mount Compressor Replacement of Stretch Fit Belt is Required New Part
- Denso 10S20F Compressor
- New Compressor
- Product Attributes:
- O-Ring A Quantity: 1
- Refrigerant Type: R134a
- Clutch Included: Included
- Coil Clock: 1 Wire Lead
- New or Reman: New
- Groove: 4
- Discharge Port Type: Sealing Washer
- Model: 10s20f
- Pulley Diameter IN: 4.250
- Switch Type: N/a
- Suction Port Type: Sealing Washer
- Electronic Control Valve: No
- Mounting Hardware?: Not Included
- O-Ring B Number/Desc: 24402 / Slimline Washer
- O-Ring B Quantity: 1
- Part Note: May Require Use Of Oe Manifold; Deslugger 36141 Recommended To Eliminate Compressor Damage On Vehicles With Low Mount Compressor
- O-Ring A Number/Desc: 24404 / Slimline Washer
- Oil Type: Pag 46
- Pulley Diameter MM: 107.95
- Mount Distance IN: 0.66
- Mount Distance MM: 16.51
- Type: Denso
- Belt Type: Serpentine
-
Features:
- Manufactured Compressors come pre-charged with 3 ounces of PAG oil for R134a or R1234yf applications
- Manufactured Compressors come with the R12/R134A/1234yf required O-rings /sealing washers to install the compressor
- Manufactured Compressors meet or exceed OE specifications
- Manufactured Compressors are individually vacuum,pressure, and Helium Mass Spectrometer tested to ensure no leaks
- Manufactured Compressors are validated for the equivalent of 100,000 miles
- Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Four Seasons.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2010 - Hummer H3T | V | 5328 | 8 Cyl 5.3L | 325 |
- Cut to Length, 13"
- Straight Heater Hose (Standard)
- Product Attributes:
- Molded: No
- Weight Per Length: 13.20 Lbs./carton
- Centerline Length:
- 15.24
- 15240
- 600
- End 1 Inside Diameter:
- .75
- 19
- Material: Epdm
- End 2 Inside Diameter:
- .75
- 19
-
Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
10229491, 12322343, 12368236, 12804554, 15043166, 15043168, 15079924, 15246436, 15282248, 15293037, 15755541, 15758384, 15782202, 1787185Z00, 1787285Z00, 19129880, 19129909, 19129949...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2010 - Hummer H3T | V | 5328 | Heater To Pipe-2 | GAS | 8 Cyl 5.3L | 325 |
- Cut to fit
- 90 Degree Molded Heater Hose
- Product Attributes:
- Molded: Yes
- Centerline Length: 254
- End 1 Inside Diameter:
- .625
- 16
- Angle: 90
- Arm Length:
- 102
- 152
- 4
- 6
- Material: Epdm
- End 2 Inside Diameter:
- .625
- 16
- Quick Connect Fitting Quantity: 0
-
Features:
- Resists electrochemical degradation and water permeation
- Use with heater hose connectors and bulk heater hose to create custom assemblies
- Compatible for coolant, air and water applications
- EPDM tube and cover, synthetic fiber reinforcement
- SAE 20R3 EC Class D1, SAE 20R4 EC Class D1
- Temperature Range: -40 Deg. F to +275 Deg. F (-40 Deg. C to +135 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- It can be difficult to find hoses that easily adapt to sharp bends in your assemblies. Gates created a 90 Degree Molded Heater Hose to make replacing hoses with existing sharp bends easy. Conveniently, our 38 sizes handle thousands of applications and are built to last.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0032224, 027004156, 05743507, 06006269, 07HS00043A, 07HS00044A, 0K01315421, 10002473, 10006390, 10018899, 10021318, 10038502, 10060964, 10065741, 10080395, 10135305, 10135333, 10145098...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2010 - Hummer H3T | V | 5328 | Pipe-1 To Thermostat | GAS | 8 Cyl 5.3L | 325 |
- Cut to fit
- 90 Degree Molded Heater Hose
- Product Attributes:
- Molded: Yes
- Centerline Length: 254
- End 1 Inside Diameter:
- .75
- 19
- Angle: 90
- Arm Length:
- 102
- 152
- 4
- 6
- Material: Epdm
- End 2 Inside Diameter:
- .75
- 19
- Quick Connect Fitting Quantity: 0
-
Features:
- Resists electrochemical degradation and water permeation
- Use with heater hose connectors and bulk heater hose to create custom assemblies
- Compatible for coolant, air and water applications
- EPDM tube and cover, synthetic fiber reinforcement
- SAE 20R3 EC Class D1, SAE 20R4 EC Class D1
- Temperature Range: -40 Deg. F to +275 Deg. F (-40 Deg. C to +135 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- It can be difficult to find hoses that easily adapt to sharp bends in your assemblies. Gates created a 90 Degree Molded Heater Hose to make replacing hoses with existing sharp bends easy. Conveniently, our 38 sizes handle thousands of applications and are built to last.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
10017940, 10065640, 10065675, 10120065, 10135307, 10145119, 10188037, 10218423, 10227419, 10385281, 10441374, 1405531U00, 1405646R00, 1405670F05, 14244S, 15077061, 15123654, 15258060...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2010 - Hummer H3T | V | 5328 | Pipe-2 To Thermostat | GAS | 8 Cyl 5.3L | 325 |
- Body Bolt - M6-1.0 X 25mm
- Compressor Tube Package Quantity: 4
- Product Attributes:
- SAE or Metric:
- Metric
- Métrico
- Tamaño nominal: M6 X 1.0 X 25
- Thread Pitch:
- 1
- 1 Mm
- Thread Type:
- Coarse
- Grueso
- Heat Hardened:
- Oui
- Sí
- Yes
- Callout Size: M6 X 1.0 X 25
- Finish:
- Fosfato
- Phosphate
- Bolt Grade: 9.8
- Color:
- Black
- Negro
- Noir
- Head Tool Size: 10 Mm
- Thread Diameter: 6
- Contenidos del paquete: 4 Pernos De Carrocería
- Head Drive Type:
- Hex
- Hexagonal
- Type:
- Hex
- Hexagonal
- Material:
- Acero
- Steel
- SAE or Metric:
-
Features:
- Durable materials - manufactured to specific thread tolerance standards
- Corrosion tested - hardware undergoes salt spray testing to ensure corrosion resistance
- Multipurpose usefulness - can be used in a variety of applications, from auto to home
- Trustworthy quality - backed by team of professional engineers and quality control specialists in the United States
- These bolts are manufactured using durable materials and corrosion-tested to ensure required strength and longevity.
This Part Fits the Following OEM/Substitute Numbers:
11503982, 11609989, 455930
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2010 - Hummer H3T | L | 3654 | 5 Cyl 3.7L | 223 |
Additional Fitment Information:
| Vehicle |
|---|
| 2010 - Hummer H3T |
- Heater Hose Connector
- Heater Hose Connector Heater Inlet Packaging Type: Clamshell Package Quantity: 1
- Product Attributes:
- End 2 Outside Diameter: 0.75
- End 2 Type:
- Espiga De La Manguera
- Hose Barb
- Sistema de conexión rápida: Sí
- Contenidos del paquete: 1conector De La Manguera Del Calentador
- End 1 Outside Diameter: 0.75
- End 1 Type:
- Desconexión Rápida
- Quick Disconnect
- Material:
- Plastic
- Plástico
- Quick Connect System:
- Oui
- Yes
- Fitting Angle:
- Recto
- Straight
-
Features:
- Quality replacement - this heater hose connector matches the fit and function of the original equipment connector
- Durable construction - this heater hose connector is made of quality materials for a precise fit and leak-free durability
- Cost-effective solution - offers original equipment quality at competitive price
- Performance tested - this connector has been rigorously pressure tested to ensure reliable performance
- Made of quality materials, this HVAC heater hose connector matches the fit and function of an original equipment connector to restore leak-free performance.
This Part Fits the Following OEM/Substitute Numbers:
22657120, 25956573, 28502, 4205, 65648, 80463, XC2Z18B402CA
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2010 - Hummer H3 | L | 3654 | 5 Cyl 3.7L | 223 |
- Cut to Length, 13"
- Straight Heater Hose (Standard)
- Product Attributes:
- Molded: No
- Working Pressure: 60
- Weight Per Length: 11.70 Lbs./carton
- Centerline Length:
- 15.24
- 15240
- 600
- End 1 Inside Diameter:
- .625
- 16
- Material: Epdm
- End 2 Inside Diameter:
- .625
- 16
-
Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0K55261B16C, 0K55261B22F, 10023264, 10230417, 10427731, 12322342, 12368235, 12575636, 12600099, 12604941, 12639709, 12639710, 14055JK20A, 15024548, 15051852, 15051853, 15064188, 15064189...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2010 - Hummer H3 | V | 5328 | Heater To Pipe-1 | GAS | 8 Cyl 5.3L | 325 |
Showing 1 - 10 of 18 products
Loading...