Image
Product
Price
- Front and Rear Floor Mats
- Thermoplastic Elastomer; Black; 4 pcs
- UNIVERSAL-FRONT AND REAR FLO
- Uni-Fit Floor Mats
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
- Style: Molded
-
Features:
- No Hassle Lifetime Guarantee
- Made In The USA
- Extra Thick Driver Heel Pad Provides Years Of Life
- High Perimeter Sides Contain Spills And Debris
- Raised Ridges Keep Your Feet Out Of Water Mud And Dirt
- Easily Cleaned
- With Patented Nibs On The Reverse Side To Keep Mat From Shifting
- Husky Liners Uni-Fit all-weather floor mats are soft underfoot, but ultra-strong to standup to whatever you hurl at em. The center channel funnels mud, snow and other liquids into the recessed ribs, containing the mess, until you can yank, dump, wash and repeat.
Additional Fitment Information:
| Vehicle | Position | Doors | Body |
|---|---|---|---|
| 1930 - Ford Sedan Delivery | Front and Rear | 2 | Standard Cab Pickup |
- with Green Coolant
- PEAK OET North American Conventional Green 50/50 Pre-diuted; 1 Gallon
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 1930 - Ford Model AA |
- Auxiliary-Aluminum; Silver; Volume 40 Gallons; L 60in. x W 9 in. x H 19 in.; Long Rectangle
- Specialty Series Auxiliary Transfer Tank; Auxiliary-Aluminum; Silver; Volume 40 Gallons; L 60in. x W 9 in. x H 19 in.; Long Rectangle;
- Specialty Series Auxiliary Transfer Tank
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: State Of California Consumers - Warning: Cancer And Reproductive Harm. Www.p65warnings.ca.gov
- Gallon Capacity: 40
-
Features:
- Constructed Of Heavy Duty Brite-Tread Aluminum
- Radius Curve Eliminates Weld Pressure Points
- 4 Stability Baffles And Drain Plug
- Made In USA
- Limited Lifetime Warranty
- Dee Zee Auxiliary Tanks - A safe and convenient means for transporting non-flammable liquids. Auxiliary tank can be connected to gravity flow kit to syphon fuel directly into your vehicles diesel gas tank (sold separately). Constructed of heavy gauge Brite-Tread aluminum. Radius curve design eliminates key weld pressure points. Tanks feature stability baffles, lockable cap, 3/8 in. drainage plug, and venting coupler. Tanks are intended for private use (non-commercial). Hydrostatically pressure tested to meet Federal Motor Carrier Safety Administration requirements for auxiliary tanks. Meets Federal DOT requirements for UN31B tanks. Connector kits to feed diesel directly into your fuel line sold separately (DZ97960 & DZ97961).
Additional Fitment Information:
| Vehicle |
|---|
| 1930 - Ford Sedan Delivery |
- Prestone All Vehicles - 10yr/300k mi- Antifreeze+Coolant (1 Gal - Concentrate)
- Extended Life, Full Strength Concentrate
- Product Attributes:
- Biodegradable: No
- California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
- Freezing Point: -34
- Recommended Dilution Ratio: 5 To 7
- Phosphate Free: Yes
- Ethylene Glycol: Yes
- Boiling Point at 50 50 Mixture: 229
- Prestone All Vehicles antifreeze+coolant - Concentrate is our optimized formula for All Vehicles; makes, models, years & fluid colors. Our Patented Cor-Guard® Technology (our best coolant innovation in decades) works with all new engines, and also is backward compatible - providing instant protection in older engines. Not only does Prestone Coolant Technology manage engine temperature all year round and protects against freezing, it also uniquely protects the engine from serious damage. No matter what type of coolant is currently in your engine, a Single Top-off of Patented Cor-Guard® Technology instantly protects parts better from corrosion, buildup, pitting, scaling, rust and other damage; a complete replacement of all coolant protects to the maximum. Internal engine damage can cause parts failure, resulting in expensive auto repair shop bills and downtime inconveniences. Using Prestone Antifreeze+Coolant protects against engine issues and those inconveniences. This patented fluid is designed to last 10yrs / 300,000 miles and will protect the internal parts of the engine for 10yrs / 300,000 miles
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 1930 - Ford Model A |
- Prestone Amam Gen 2 50/50 6/1 GAL
- Extended Life 50/50, Ready to Use Prediluted
- Product Attributes:
- California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
- Freezing Point: -34
- Recommended Dilution Ratio: No Dilution Required
- Phosphate Free: Yes
- Boiling Point at 50 50 Mixture: 229
- for corrosion protection for cars and light duty trucks. Top-off a vehicle’s cooling system with Prestone 50/50, which is a blend of concentrated antifreeze/coolant and demineralized water.
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 1930 - Ford Model A |
- 90 Amp; 12 Volt; w/Pulley For 5/8 in. Belt; Black Finish
- PowerGEN Alternator; 90 Amp; 12 Volt; w/Pulley For 5/8 in. Belt; Black Finish;
- PowerGEN Alternator
- Product Attributes:
- Amperage: 90 Amp
-
Features:
- Keep Your Correct Vintage Look And Gain Modern Performance
- 90 Plus Amps At Top End/65 Plus Amps At Idle
- Easy To Install 1-Wire Internally Regulated
- Individually Dyno Tested with Proof of Performance Guarantee
- Fits Like Original Generator
- Wiring/Mounting Instructions/Hardware Included
- PowerGen Alternators keep your correct vintage look and gain modern performance. PowerGen alternators feature 1 Wire hookup with an internal regulator. Huge amp increase stops dimming headlights. PowerGen are easy to install and fits most existing bracketry. Made from billet aluminum for half the weight with a durable black powdercoat finish.
Additional Fitment Information:
| Vehicle |
|---|
| 1930 - Ford Model A |
- Volume 36 Gallons; L 45.25 in. x W 11.25 in. H 17.25 in.; Brite Aluminum; Vertical
- Heavy Duty Series Liquid Transfer Tank; Volume 36 Gallons; L 45.25 in. x W 11.25 in. H 17.25 in.; Brite Aluminum; Vertical;
- Heavy Duty Series Liquid Transfer Tank
- Product Attributes:
- Gallon Capacity: 36
-
Features:
- 36 Gallon Capacity
- Small Rectangle Design Allows For Easy Mounting
- Baffled To Reduce Liquid Movement Inside The Tank
- Constructed Of Heavy Weight .125 in. Thick Alum.
- Mounting Kit Included
- Vented Lockable Cap Included
- Fully Welded Mounting Brackets
- 100 percent pressure tested. Heavy duty 14 gauge steel. Durable powder coated finish. Flush mounted dual 2 in. reinforced bungs strengthen the pump mounting. Baffles add strength while preventing the contents from shifting too quickly. Vented lockable cap. Lifting eyes for installation for when the tank is empty. Welded 11 gauge moutning brackets. Installation kit is included.
Additional Fitment Information:
| Vehicle |
|---|
| 1930 - Ford Sedan Delivery |
- Volume 75 Gallons; L 43 in. x W 31 in. x H 24 in.; White Steel; L-Shaped
- Heavy Duty Series Liquid Transfer Tank; Volume 75 Gallons; L 43 in. x W 31 in. x H 24 in.; White Steel; L-Shaped;
- Heavy Duty Series Liquid Transfer Tank
- Product Attributes:
- Gallon Capacity: 75
-
Features:
- 75 Gallon Capacity
- Abrasion Resistant Powder Coated Finish
- L Shape Allows Use With Most Standard Toolboxes
- Baffled To Reduce Liquid Movement Inside The Tank
- Constructed From Heavy Duty 14 ga. Steel
- Lifting Eyes For Installation When Tank Is Empty
- Mounting Kit Included
- Vented Lockable Cap Included
- 100 percent pressure tested. Heavy duty 14 gauge steel. Durable powder coated finish. Flush mounted dual 2 in. reinforced bungs strengthen the pump mounting. Baffles add strength while preventing the contents from shifting too quickly. Vented lockable cap. Lifting eyes for installation for when the tank is empty. Welded 11 gauge moutning brackets. Installation kit is included.
Additional Fitment Information:
| Vehicle |
|---|
| 1930 - Ford Sedan Delivery |
- Volume 75 Gallons; L 48.25 in. x W 31 in. x H 24 in.; White Steel; Combo
- Heavy Duty Series Liquid Transfer Tank; Volume 75 Gallons; L 48.25 in. x W 31 in. x H 24 in.; White Steel; Combo;
- Heavy Duty Series Liquid Transfer Tank
- Product Attributes:
- Gallon Capacity: 75
-
Features:
- 75 Gallon Capacity
- Abrasion Resistant Powder Coated Finish
- Includes Mounted Tool Chest For Additional Storage
- Baffled To Reduce Liquid Movement Inside The Tank
- Constructed From Heavy Duty 14 ga. Steel
- Lifting Eyes For Installation When Tank Is Empty
- Mounting Kit Included
- Vented Lockable Cap Included
- 100 percent pressure tested. Heavy duty 14 gauge steel. Durable powder coated finish. Flush mounted dual 2 in. reinforced bungs strengthen the pump mounting. Baffles add strength while preventing the contents from shifting too quickly. Vented lockable cap. Lifting eyes for installation for when the tank is empty. Welded 11 gauge moutning brackets. Installation kit is included.
Additional Fitment Information:
| Vehicle |
|---|
| 1930 - Ford Sedan Delivery |
- Volume 100 Gallons; L 45.25 in. W 24 in. x H 24 in.; White Steel; Rectangle
- Heavy Duty Series Liquid Transfer Tank; Volume 100 Gallons; L 45.25 in. W 24 in. x H 24 in.; White Steel; Rectangle;
- Heavy Duty Series Liquid Transfer Tank
- Product Attributes:
- Gallon Capacity: 100
-
Features:
- 100 Gallon Capacity
- Abrasion Resistant Powder Coated Finish
- High Capacity Rectangle Design
- Baffled To Reduce Liquid Movement Inside The Tank
- Constructed From Heavy Duty 14 ga. Steel
- Lifting Eyes For Installation When Tank Is Empty
- Mounting Kit Included
- Vented Lockable Cap Included
- 100 percent pressure tested. Heavy duty 14 gauge steel. Durable powder coated finish. Flush mounted dual 2 in. reinforced bungs strengthen the pump mounting. Baffles add strength while preventing the contents from shifting too quickly. Vented lockable cap. Lifting eyes for installation for when the tank is empty. Welded 11 gauge moutning brackets. Installation kit is included.
Additional Fitment Information:
| Vehicle |
|---|
| 1930 - Ford Sedan Delivery |
Showing 1 - 10 of 21 products
Loading...