Image
Product
Price
- Prestone Amam Gen 2 50/50 6/1 GAL
- Extended Life 50/50, Ready to Use Prediluted
- Product Attributes:
- California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
- Freezing Point: -34
- Recommended Dilution Ratio: No Dilution Required
- Phosphate Free: Yes
- Boiling Point at 50 50 Mixture: 229
- for corrosion protection for cars and light duty trucks. Top-off a vehicle’s cooling system with Prestone 50/50, which is a blend of concentrated antifreeze/coolant and demineralized water.
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 1964 - Opel Rekord |
- Prestone All Vehicles - 10yr/300k mi- Antifreeze+Coolant (1 Gal - Concentrate)
- Extended Life, Full Strength Concentrate
- Product Attributes:
- Biodegradable: No
- California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
- Freezing Point: -34
- Recommended Dilution Ratio: 5 To 7
- Phosphate Free: Yes
- Ethylene Glycol: Yes
- Boiling Point at 50 50 Mixture: 229
- Prestone All Vehicles antifreeze+coolant - Concentrate is our optimized formula for All Vehicles; makes, models, years & fluid colors. Our Patented Cor-Guard® Technology (our best coolant innovation in decades) works with all new engines, and also is backward compatible - providing instant protection in older engines. Not only does Prestone Coolant Technology manage engine temperature all year round and protects against freezing, it also uniquely protects the engine from serious damage. No matter what type of coolant is currently in your engine, a Single Top-off of Patented Cor-Guard® Technology instantly protects parts better from corrosion, buildup, pitting, scaling, rust and other damage; a complete replacement of all coolant protects to the maximum. Internal engine damage can cause parts failure, resulting in expensive auto repair shop bills and downtime inconveniences. Using Prestone Antifreeze+Coolant protects against engine issues and those inconveniences. This patented fluid is designed to last 10yrs / 300,000 miles and will protect the internal parts of the engine for 10yrs / 300,000 miles
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 1964 - Opel Rekord |
- Autolite 275 Copper Non-Resistor Spark Plug
- OE Style; .030 Gap
- Copper Non-Resistor Spark Plug
- Product Attributes:
- Center Electrode Design: Standard / Regular
- Seat Type: Flat
- Electrical Terminal Type: Removable Nut
- Ground Electrode Tip Material: Nickel
- Center Electrode Core Material: Copper
- Resistor Type: No
- Insulator Material: Ceramic
- Hex Size:
- 13/16"
- 21
- Reach:
- 0.500
- 13.0
- Center Electrode Tip Material: Nickel
- Ground Electrode Tip Design: Tapered
- Insulator Type: Short
- Pre-Gap Size:
- 0.025
- 0.60
- Ground Electrode Core Material: Nickel
- Autolite® Copper Spark Plugs are manufactured to deliver quick starts, improved fuel economy and smooth acceleration. Autolite® spark plugs are the best alternative to OE spark plugs, offering OE form, fit and function for all makes and models, both foreign and domestic, at a value price. Autolite provides the automotive aftermarket and Original Equipment manufacturers with the highest quality ignition products and is the leading supplier of spark plugs.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
3068, 312, 42-6FS, 934, AE22, WKA145T3
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1964 - Opel Kadett | L | 1077 | 4 Cyl 1.1L | 66 |
- For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;CARB E.O. D-550-34
- Electric Fuel Pump; For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;
- Electric Fuel Pump
- Product Attributes:
- Hose Size: 0.3125 In.
- Maximum PSI: 3.5
- WARNING CA Proposition 65: Yes
- Fuel Type: Gasoline
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inlet Size: 0.125 In. Npt
- Free Flow GPH: 28
- Item Weight: 1.200 Lbs.
-
Features:
- Solid-state Worry Free Electronics
- Internal Pressure Regulating
- Universal Design Allows For Easy Installation
- No Diaphragms Or Mechanical Parts To Wear Out
- They Make An Excellent Fuel Transfer Pump
- Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flow rate is 28 gallons per hour (GPH) at 2 to 3-1/2 pounds per square inch (PSI). Universal design for most import 4 & 6-cylinder carburetor applications. Please see part #12S for V8 gasoline applications, part #12D for diesel applications or part #12E for Ethanol, Methanol, E85 and Race Fuel applications. Solid-state worry free electronics. Eliminates vapor lock and flooding. Works well as a fuel transfer, booster, or stand-alone pump. Not recommended for diesel, methanol, ethanol, E85 or race fuel applications!!
Additional Fitment Information:
| Vehicle |
|---|
| 1964 - Opel Kadett |
- For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;CARB E.O. D-550-34
- Electric Fuel Pump; For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;
- Electric Fuel Pump
- Product Attributes:
- Hose Size: 0.3125 In.
- Maximum PSI: 3.5
- WARNING CA Proposition 65: Yes
- Fuel Type: Gasoline
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inlet Size: 0.125 In. Npt
- Free Flow GPH: 28
- Item Weight: 1.200 Lbs.
-
Features:
- Solid-state Worry Free Electronics
- Internal Pressure Regulating
- Universal Design Allows For Easy Installation
- No Diaphragms Or Mechanical Parts To Wear Out
- They Make An Excellent Fuel Transfer Pump
- Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flow rate is 28 gallons per hour (GPH) at 2 to 3-1/2 pounds per square inch (PSI). Universal design for most import 4 & 6-cylinder carburetor applications. Please see part #12S for V8 gasoline applications, part #12D for diesel applications or part #12E for Ethanol, Methanol, E85 and Race Fuel applications. Solid-state worry free electronics. Eliminates vapor lock and flooding. Works well as a fuel transfer, booster, or stand-alone pump. Not recommended for diesel, methanol, ethanol, E85 or race fuel applications!!
Additional Fitment Information:
| Vehicle |
|---|
| 1964 - Opel Kadett |
- Radiator cap
- Relief pressure 13 lb
- Standard
- Product Attributes:
- Valve OD: 1.54 In
- Cap Depth: 1.18
- Filler Neck Outside Diameter: 2.13
- Lever Type:
- No
- Standard
- Coolant Recovery System: Open & Closed System
- Quick Pressure Release: No
- Filler Neck Height: 0.75
- Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.
This Part Fits the Following OEM/Substitute Numbers:
00861125, 0361865, 10229, 10229ST, 11229, 12R5, 1326012, 1502172631, 1570172030, 1640123070, 1640150010, 1640760010, 1678-291612, 1686107, 17013, 18229, 19045692003, 19045PA0014...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1964 - Opel Kadett | L | 986 | 4 Cyl 1.0L | 60 |
- Safety Lever Radiator Cap
- Relief pressure 13 lb
- Safety Lever
- Product Attributes:
- Valve OD: 1.54 In
- Cap Depth: 1.48
- Lever Type:
- Safety Lever
- Yes
- Cap Finish: Plastic
- Coolant Recovery System: Open & Closed System
- Quick Pressure Release: Yes
- Safely remove your radiator cap by venting the pressure from the cooling system before removing the cap. Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.
This Part Fits the Following OEM/Substitute Numbers:
10329, 10329ST, 11329, 12R5S, 1678-290346, 17213, 18329, 28329, 31511, 380172, 703-1700, 70329BL, 70329RD, 7713, 7713-RC, 861852, 861855, 9ST13...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1964 - Opel Kadett | L | 987 | 4 Cyl 1.0L | - |
- FRAM, CA140, H.D. Air Filter
- Round Plastisol Air Filter
- FRAM
- Product Attributes:
- Outer Diameter Top: 8.063
- Inside Diameter: 6.560
- Reusable: No
- Inside Diameter Top: 6.563
- Shape: Round
- Bottom Inside Diameter: 6.560
- Flexible or Rigid: Rigid
- Grade Type: Regular
- Outside Diameter: 8.063
- Outer Diameter Bottom: 8.060
- Washable: No
This Part Fits the Following OEM/Substitute Numbers:
4S-8337, 4S8337, 9501, A426C, AF-846, PMA-4S8337
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1964 - Opel Kadett | L | 1077 | 4 Cyl 1.1L | 66 |
- Taper Bearing Set
- Taper Bearing Set Includes Cup and Cone
- National A-1 Taper Bearing Set
- Product Attributes:
- Cone Radius (MM): 1.1680
- Width (Inch): 0.5450
- Cone Length (Inch): 0.5750
- Cone Bore (MM): 17.4630
- Cone Length (MM): 14.6050
- Cup Radius (MM): 1.1680
- Standout (MM): 0.3180
- Taper Bearing Cone: Lm11749
- Cone Bore (Inch): 0.6875
- Cone Radius (Inch): 0.0460
- Cup Length (Inch): 0.4200
- Cup Bore (Inch): 1.5700
- Standout (Inch): 0.0125
- Taper Bearing Cup: Lm11710
- Cup Radius (Inch): 0.0460
- Cup Bore (MM): 39.8780
- Part Description: Taper Bearing Set
- Manufactured with premium-grade steel, National® taper bearing sets feature crowned raceways and rollers to ensure even load distribution.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0069811605, 02667886, 051-3849, 054480, 09265-17101, 09265-29201, 11054489, 11054489A, 11527972, 11600.21084.00, 11600.21408.00, 12934, 1492160, 17017, 184447, 191-598-625, 1GM-405-645, 2013300151...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1964 - Opel Kadett | Front Outer |
- High Capacity V-Belt (Standard)
- Product Attributes:
- Top Width:
- .41
- 10
- Belt Material: Epdm
- Notched: Yes
- Outside Circumference:
- 36.43
- 925
- Construction: Notched
- Cross Section Designation: Hc41
- Effective Length:
- 35.6
- 904
- Angle: 36
- Cord Material: Polyester
- Top Width:
-
Suggested Purchase Quantity: 3
- Most jobs typically require 3 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0026169000, 0039975592, 007753009502, 0119788, 01629, 0200097, 0211790013, 0211790513, 028145271F, 03-02-682-5, 046145271A, 046903137, 048903137, 05110243, 053903137, 068121039M, 0950900, 10353...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1964 - Opel Kadett | L | 987 | Fan and Alternator/Generator | GAS | 4 Cyl 1.0L | - |
Showing 1 - 10 of 13 products
Loading...