Image
Product
Price
- TruXport-95-98 T100 X-Cab/99-06 Tundra 6ft.2in. w/out Bed Caps
- Black; For Use w/o Bed Caps
- Toyota Tundra; without Bed Caps
- TruXport® Tonneau Cover
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
- Front Opening: No
- Style: Roll-up Soft Cover
- Install Time: 15 Minutes
- Rails To Install: Yes
- Low Profile: Yes
- Actual Color: Black
- Paintable: No
- Works w/Toolbox: No
- Key Lockable: No
- Full Bed Access: No
-
Features:
- Cover Sits 1.5 in. Above The Truck Bed
- Providing Distinctive Good Looks
- Dual Paddle Latches Easily Accessed At Both Sides Of The Truck
- Securely Fastening The Cover To The Bed
- No Drilling Or Special Tools Required
- Quality Leather Grain Fabric
- Helps Protect Your Cargo From The Harshest Of Elements
- Integrated Pre-Set Tension Control
- Dual-Latching System To Keep The Cover Tight
- Made In The USA
- 5-Year Warranty
- TruXport is an attractive roll-up truck bed cover that includes top quality features and benefits with a price that won't break the bank. It's easy to install, and operation is simple. The TruXport mounts on top of the truck bed rails providing distinctive good looks that will truly complement your truck. Once installed, the pre-set tension control will help maintain the TruXport's great looks all year round.
Additional Fitment Information:
| Vehicle | Bed | Bed Length | Sub Model |
|---|---|---|---|
| 1996 - Toyota T100 | Fleetside | 76.1 | SR5 |
- TruXport-95-98 T100 X-Cab/99-06 Tundra 6ft.2in. w/out Bed Caps
- Black; For Use w/o Bed Caps
- Toyota Tundra; without Bed Caps
- TruXport(R) Tonneau Cover
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message:
- Cancer And Reproductive
- Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
- Front Opening: No
- Style: Roll-up Soft Cover
- Install Time: 15 Minutes
- Rails To Install: Yes
- Low Profile: Yes
- Actual Color: Black
- Paintable: No
- Works w/Toolbox: No
- Key Lockable: No
- Full Bed Access: No
-
Features:
- Cover Sits 1.5 in. Above The Truck Bed
- Providing Distinctive Good Looks
- Dual Paddle Latches Easily Accessed At Both Sides Of The Truck
- Securely Fastening The Cover To The Bed
- No Drilling Or Special Tools Required
- Quality Leather Grain Fabric
- Helps Protect Your Cargo From The Harshest Of Elements
- Integrated Pre-Set Tension Control
- Dual-Latching System To Keep The Cover Tight
- Made In The USA
- 5-Year Warranty
- TruXport is an attractive roll-up truck bed cover that includes top quality features and benefits with a price that won't break the bank. It's easy to install, and operation is simple. The TruXport mounts on top of the truck bed rails providing distinctive good looks that will truly complement your truck. Once installed, the pre-set tension control will help maintain the TruXport's great looks all year round.
Additional Fitment Information:
| Vehicle | Bed | Bed Length | Sub Model |
|---|---|---|---|
| 1996 - Toyota T100 | Fleetside | 76.1 | SR5 |
- Class 3 Trailer Hitch; 2in. Receiver; Select Toyota Tacoma
- 5000lbs. Gross Trailer Weight; 500lbs. Tongue Weight; 6000lbs. Weight Distributing; 600lbs. Weight Distributing Tongue Weight Square Main Body~No Drilling Required~Visibility: Concealed~Install Time 60 Minutes
- CURT 13013 Class 3 Trailer Hitch; 2-Inch Receiver; Fits Select Toyota Tacoma
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 5000 Lbs.
- Visibility: Concealed
- Weight Carrying Capacity: 5000
- Body Shape: Square
- WARNING CA Proposition 65: No
- WD Tongue Weight: 600
- Drilling Required: No
- Install Time: 60 Minutes
- WC Tongue Weight: 500
- Weight Distribution: 6000
- Receiver Tube Size: 2.000 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Toyota Tacoma (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 5,000 lbs. GTW and 500 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 6,000 lbs. WD and 600 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1996 - Toyota Tacoma | L | 2694 | Rear | 4 Cyl 2.7L | - |
- Custom Wiring Harness; 4-Way Flat Output; Select Toyota Tacoma; T100; Hilux
- Circuit Protected; 3-Wire System; 4 Way Flat; Tail Light Circuit 7.5 Amps; Turn And Brake Circuits 3.0 Amps Install Time 10 Minutes
- CURT 55513 Vehicle-Side Custom 4-Pin Trailer Wiring Harness; Fits Select Toyota Tacoma; T100; Hilux
- Custom Wiring Harness
- Product Attributes:
- Output Type: 4-way Flat
- Electrical System Type: 3w
- Converter Type: Circuit Protected
- WARNING CA Proposition 65: Yes
- Install Time: 10 Minutes
- Turn and Brake Circuits: 3.0 Amp
- Tail Light Circuits: 7.5 Amp
-
Features:
- Plugs Into Tail Light Assembly To Provide A 4-Way Flat Socket
- Simple Plug-And-Play Design Eliminates The Need For Splicing
- 4-Way Flat Connects Tail Lights Brake Lights And Turn Signals
- Equipped w/A 3-Wire To 2-Wire Tail Light Converter
- Constructed w/Smt Circuitry For Better Performance And Durability
- Dust Cover Included To Keep Connector Clean When Not In Use
- Backed By A Limited One-Year Warranty
- Made In USA
- If your vehicle is not equipped with wiring for towing a trailer, CURT custom wiring is the ideal solution. A custom wiring harness -- also called a T-connector -- is a simple, plug-and-play electrical device that plugs into your automotive electric system and provides a standard, universal trailer wiring connection. This is done using two or more vehicle-specific, OEM-compatible connectors to plug into the taillight assembly, eliminating the need for cutting, splicing and soldering during installation. Custom wiring harnesses are made vehicle-specific, and while they are not available for all vehicles, they do offer one of the fastest, easiest and most secure ways to wire a vehicle for towing. This particular plug-in harness provides a 4-way flat connector socket and is designed to be a custom wiring harness to fit certain years of the Toyota Tacoma, T100 and Hilux (to verify your vehicle compatibility, see application info). It comes with all necessary wiring components to establish a reliable trailer wiring connection, as well as a dust cover to keep the connector clean when not in use. You have a picture in mind of your next destination -- maybe its the boat landing at your favorite fishing spot, maybe its a campsite that overlooks one of natures masterpieces, or maybe its the next big jobsite. However, turning that picture into a reality takes more than just daydreaming. It takes a solid connection and the right amount of power. CURT custom wiring is made with some of the most sophisticated technology in the industry and is designed to install with ease, giving you a long-lasting electrical connection for your towing hitch setup.
Additional Fitment Information:
| Vehicle |
|---|
| 1996 - Toyota T100 |
- Cut-Out™ Fender Flares
- 4 pc.; Front Tire Coverage 3 in.; Front Height 5 in.; Rear Tire Coverage 3 in; Rear Height 5.25 in.; Smooth Finish; Black
- Cut-Out™ Fender Flares; 4 pc.; Front Tire Coverage 3 in.; Front Height 5 in.; Rear Tire Coverage 3 in; Rear Height 5.25 in.; Smooth Finish; Black;
- Cut-Out(TM) Fender Flares
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
- Drilling Required: Yes
-
Features:
- Installation Drilling And/Or Cutting Required
- Premium Tire Coverage For Body Protection - Keeps Dirt And Debris Off The Truck
- Limited Lifetime Warranty
- Perfect For Off-Road Vehicles That Need Extreme Amounts Of Tire Coverage And Clearance
- Tire Coverage Varies With Vehicle 2 in. - 3.5 in.
- Made Of Dura-Flex 2000 ABS Material Which Is Flexible / Yet Durable
- 100 Percent UV Protected Smooth Matte Black Finish Can Be Easily Painted
- Durable / Heavy Duty Hardware Included Which Holds The Flares Securely In Place / Even On The Most Difficult Trails
- For extreme off-road use, theres nothing else like Bushwacker Cut-Out Fender Flares. Each set of Cut-Out Fender Flares is individually designed for your truck, to maximize off-road wheel travel and maintain adequate tire coverage. That custom approach means a smoother appearance, greater strength, and easier bolt-on installation with tough stainless steel hardware. Cut-Out Fender Flares are made from thick, warp-proof Dura-Flex 2000, our own proprietary material, engineered for added durability and flexibility in severe conditions. Its UV protection guards against chalking, while its pro-grade matte black finish looks great as-is, or custom painted to create your own personal look.
Additional Fitment Information:
| Vehicle | Position | Bed | Sub Model |
|---|---|---|---|
| 1996 - Toyota Tacoma | Front and Rear | Fleetside | SR5 |
- 4 pc.; Front Tire Coverage 3 in.; Front Height 5 in.; Rear Tire Coverage 3 in; Rear Height 5.25 in.; Smooth Finish; Black
- Cut-Out™ Fender Flares; 4 pc.; Front Tire Coverage 3 in.; Front Height 5 in.; Rear Tire Coverage 3 in; Rear Height 5.25 in.; Smooth Finish; Black;
- Cut-Out™ Fender Flares
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
- Drilling Required: Yes
-
Features:
- Installation Drilling And/Or Cutting Required
- Premium Tire Coverage For Body Protection - Keeps Dirt And Debris Off The Truck
- Limited Lifetime Warranty
- Perfect For Off-Road Vehicles That Need Extreme Amounts Of Tire Coverage And Clearance
- Tire Coverage Varies With Vehicle 2 in. - 3.5 in.
- Made Of Dura-Flex 2000 ABS Material Which Is Flexible / Yet Durable
- 100 Percent UV Protected Smooth Matte Black Finish Can Be Easily Painted
- Durable / Heavy Duty Hardware Included Which Holds The Flares Securely In Place / Even On The Most Difficult Trails
- For extreme off-road use, theres nothing else like Bushwacker Cut-Out Fender Flares. Each set of Cut-Out Fender Flares is individually designed for your truck, to maximize off-road wheel travel and maintain adequate tire coverage. That custom approach means a smoother appearance, greater strength, and easier bolt-on installation with tough stainless steel hardware. Cut-Out Fender Flares are made from thick, warp-proof Dura-Flex 2000, our own proprietary material, engineered for added durability and flexibility in severe conditions. Its UV protection guards against chalking, while its pro-grade matte black finish looks great as-is, or custom painted to create your own personal look.
Additional Fitment Information:
| Vehicle | Position | Bed | Sub Model |
|---|---|---|---|
| 1996 - Toyota Tacoma | Front and Rear | Fleetside | SR5 |
- Direct-Fit Catalytic Converter
- Direct-Fit Catalytic Converter
- Direct-Fit HM Grade Federal (Excludes CA)
- Product Attributes:
- Inlet Attachment: Bolt-on
- Main Piping Diameter: 2
- Mounting Hardware Included: Yes
- Outlet Attachment: Bolt-on
- Air Tube Adaptable: No
- Overall Length: 12.5
- Subtitle: Federal / Epa Compliant
- Substrate Material: Ceramic
This Part Fits the Following OEM/Substitute Numbers:
17410-02110, 17410-11690, 17410-11700, 17410-16880, 17410-1A010, 1741002110, 1741011690, 1741011700, 1741016880, 174101A010, 18450-01060, 18450-01070, 18450-01080, 18450-01090, 18450-01100, 18450-01110, 18450-11160, 18450-16050...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1996 - Toyota Celica | L | 1762 | 4 Cyl 1.8L | 107 |
- Direct-Fit Catalytic Converter
- Federal Emissions Equipped
- Direct-Fit Catalytic Converter
- Direct-Fit HM Grade Federal (Excludes CA)
- Product Attributes:
- Inlet Attachment: Bolt-on
- Main Piping Diameter: 2
- Mounting Hardware Included: Yes
- Outlet Attachment: Bolt-on
- Air Tube Adaptable: No
- Overall Length: 12.5
- Subtitle: Federal / Epa Compliant
- Substrate Material: Ceramic
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1996 - Toyota Corolla | L | 1587 | 4 Cyl 1.6L | - |
- Direct-Fit Catalytic Converter
- Direct-Fit Catalytic Converter
- Direct-Fit HM Grade Federal (Excludes CA)
- Product Attributes:
- Inlet Attachment: Bolt-on
- Main Piping Diameter: 2
- Mounting Hardware Included: Yes
- Outlet Attachment: Bolt-on
- Air Tube Adaptable: No
- Overall Length: 12.5
- Subtitle: Federal / Epa Compliant
- Substrate Material: Ceramic
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1996 - Toyota Celica | L | 2164 | Rear | 4 Cyl 2.2L | - |
- Front Floor Mats
- Black; 2 piece
- HD FRONT FLOOR MATS
- Heavy Duty Floor Mat
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
- Style: Molded
-
Features:
- Guaranteed Not To Crack Or Break
- 0.3750 in. High Ridges
- Up To 40 percent Taller Ridges
- Extra Thick Driver Heal Pad
- Nibs On Back-Prevent Slippage
- Easily Cleaned
- Made In USA
- Year Round Protection
- Available for virtually all of today's top selling vehicles, Husky Liners Heavy Duty Floor Mats are made ultra tough to take whatever abuse you throw at them. Other mats have met their match.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 1996 - Toyota RAV4 | Front | Base |
Showing 1 - 10 of 8185 products
Loading...