2009 Jeep Lexus Parts
Choose a Model for your 2009 Jeep
Image
Product
Price
- Class 3 Trailer Hitch; 2in. Receiver; Select Jeep Wrangler JK
- 3500lbs. Gross Trailer Weight; 350lbs. Tongue Weight; 4000lbs. Weight Distributing; 400lbs. Weight Distributing Tongue Weight No Drilling Required~Visibility: Concealed~Install Time 20 Minutes
- CURT 13432 Class 3 Trailer Hitch; 2-Inch Receiver; Fits Select Jeep Wrangler JK
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 3500 Lbs.
- Visibility: Concealed
- Weight Carrying Capacity: 3500
- WARNING CA Proposition 65: No
- WD Tongue Weight: 400
- Drilling Required: No
- Install Time: 20 Minutes
- WC Tongue Weight: 350
- Weight Distribution: 4000
- Receiver Tube Size: 2.000 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Jeep Wrangler JK (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 3,500 lbs. GTW and 350 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 4,000 lbs. WD and 400 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2009 - Jeep Wrangler | V | 3778 | Rear | 6 Cyl 3.8L | 231 |
- Oil Filter
- H-3.75 in.; OD-3 in.; M22x1.5 Thread; psi Relief Valve 11-17 Premium Oil Filter w/Wrench Off Nut
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Thread Size: M22 X 1.500 In.
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Style: Canister
- Item Weight: 0.800 Lbs. (0.4 Kg)
- Product Box Height: 4.060 In. (103mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.160 In. (80 Mm)
- Package Material: Paperboard
- Product Box Length: 3.160 In. (80mm)
- PSI Relief Valve: 11-17
- Outside Diameter: 3.000 In. (76mm)
- Removal Nut: Yes
- Item Height: 3.750 In. (95mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
04892339AA, 05038041AA, 05047769AA, 12640445, 12667194, 12670058, 1651078J00, 19303975, 4115031, 57060, 57073, 68197769AA, 7060, 7073, 729854, 89017524, L12222, M1113...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2009 - Jeep Patriot | L | 2360 | 4 Cyl 2.4L | 144 |
- Oil Filter
- H-4.0 in.; OD-3.656 in.; M22 Special Thread x 1.5; psi Relief Valve 11-17 Premium Oil Filter w/Wrench Off Nut~22mm Thread
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Thread Size: M22 Special Thread X 1.500 In.
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Style: Canister
- Item Weight: 1.200 Lbs. (0.5 Kg)
- Product Box Height: 4.500 In. (114mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.880 In. (98mm)
- Package Material: Paperboard
- Product Box Length: 3.880 In. (98mm)
- PSI Relief Valve: 11-17
- Outside Diameter: 3.656 In. (93mm)
- Removal Nut: Yes
- Item Height: 4.000 In. (102mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
04884899AB, 04884899AC, 05038041AA, 51372, 872025, 89017527, B329, F1AZ6714A, F1AZ6731BD, FL820, FL820S, L24651, M1210, M1210A, OD5419, PF1250, PH2, PH8A...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2009 - Jeep Grand Cherokee | V | 6059 | 8 Cyl 6.1L | SRT8 | 370 |
- Spark Plug Platinum TT
- Gap 0.040 Platinum TT - Twin-Tip Technology Design with Platinum Center Electrode and Titanium Enhanced Ground Strap
- Spark Plug Platinum TT
- Platinum TT
- Product Attributes:
- Hex Size: 16.0
- Reach: 19.00
- Center Electrode Tip Material: Platinum
- Seat Type: Flat
- Ground Electrode Tip Design: Titanium Enhanced Twin-tip
- Center Electrode Core Material: Copper
- Ground Configuration: Twin-tip
- Pre-Gap Size: 1.0
- Resistance: 5000
- Ground Electrode Core Material: Nickel
- Twin-Tip design enables faster flame propagation for more complete combustion.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0000-18-BP01, 0000-18-F287, 0000-18-JE41, 0000-18-KJ13, 003 159 31 03, 003 159 54 03, 003 159 66 03, 003 159 67 03, 003 159 68 03, 003 159 71 03, 003 159 81 03, 003 159 94 03, 003 159 97 03, 004 159 07 03, 004 159 19 03, 09482-00549, 0K23A-18-110, 101 000 044 AA...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2009 - Jeep Patriot |
- ANCO Conventional 31 Series Wiper Blades 22
- Original Blade Type
- ANCO 31-Series Wiper Blade (Pack of 1)
- 31-Series
- Product Attributes:
- Adapters Required: No
- Adapters Included: Yes
- Frame Color: Black
- Wiper Blade Connection Type: J-hook: 9x3mm, 9x4mm; Classic Side-pin: 1/4"
- Blade Material: Duraklear - Natural Rubber
- Frame Material: Metal; Plastic
- Blade Type: Conventional/bridge
- Refillable: Yes
- The 31-Series KwikConnect wiper blade boasts reliable wiper performance.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
22-1, 22-4, 22-51, 22-54, 22-59, 22-9, 23-1, 23-51, 30-221, 350-221, 358-220, 359-230, 3722, 38-220, 39-221, 39-230, 40322, 40722A...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2009 - Jeep Compass | Front Left |
- Champion Double Platinum - Boxed - RE14PLP5
- Gap 0.050in; Plug Type RE14PLP5 Actual OE Part
- Champion Double Platinum Power 7440 Spark Plug (Carton of 6)
- Double Platinum Power
- Product Attributes:
- Seat Type: Tapered
- Electrical Terminal Type: Non-removable Nut
- Classification: Champion Double Platinum
- Resistor Type: Yes
- Plug Type: Re14plp5
- Hex Size:
- 0.625
- 15.880
- Reach: 0.984
- Center Electrode Tip Material: Platinum
- Ground Electrode Tip Design: J Gap
- Manufacturer Heat Range: 14
- Pre-Gap Size: 0.049
- Ground Electrode Core Material: Platinum
- Insulator Height: 0.2
- Champion® Double Platinum Power™ spark plugs deliver more powerful performance. Featuring exclusive Heat-Active™ alloy, platinum fine wire center electrode and platinum pad ground electrode provide maximum life and sharper spark focus.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
RE14PLP5
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2009 - Jeep Wrangler | V | 3778 | 6 Cyl 3.8L | 231 |
- Class 3 Trailer Hitch; 2in. Receiver; Select Jeep Liberty
- 5000lbs. Gross Trailer Weight; 500lbs. Tongue Weight; 7500lbs. Weight Distributing; 750lbs. Weight Distributing Tongue Weight Round Main Body~No Drilling Required~Visibility: Exposed~Install Time 20 Minutes
- CURT 13245 Class 3 Trailer Hitch; 2-Inch Receiver; Fits Select Jeep Liberty
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 5000 Lbs.
- Visibility: Exposed
- Weight Carrying Capacity: 5000
- Body Shape: Round
- WARNING CA Proposition 65: No
- WD Tongue Weight: 750
- Drilling Required: No
- Install Time: 20 Minutes
- WC Tongue Weight: 500
- Weight Distribution: 7500
- Receiver Tube Size: 2.000 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Constructed w/A Sleek Round-Tube Main Body
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Made in USA [may include imported hardware]
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Jeep Liberty (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 5,000 lbs. GTW and 500 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 7,500 lbs. WD and 750 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2009 - Jeep Liberty | V | - | Rear | 6 Cyl 3.7L | 226 |
- Class 3 Trailer Hitch; 2in. Receiver; Select Jeep Grand Cherokee WK
- 5000lbs. Gross Trailer Weight; 500lbs. Tongue Weight; 5500lbs. Weight Distributing; 550lbs. Weight Distributing Tongue Weight Flat Main Body~No Drilling Required~Visibility: Concealed~Install Time 30 Minutes
- CURT 13251 Class 3 Trailer Hitch; 2-Inch Receiver; Fits Select Jeep Grand Cherokee WK
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 5000 Lbs.
- Visibility: Concealed
- Weight Carrying Capacity: 5000
- Body Shape: Flat
- WARNING CA Proposition 65: No
- WD Tongue Weight: 550
- Drilling Required: No
- Install Time: 30 Minutes
- WC Tongue Weight: 500
- Weight Distribution: 5500
- Receiver Tube Size: 2.000 In.
-
Features:
- Custom-Made In An OEM Style For Specific Vehicles
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Jeep Grand Cherokee WK (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 5,000 lbs. GTW and 500 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 5,500 lbs. WD and 550 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2009 - Jeep Grand Cherokee | V | - | Rear | 8 Cyl 5.7L | Overland | 345 |
- Cargo Liner
- Black; For Cargo Area Behind 2nd Row Seats
- CS CARGO LINER
- Classic Style Cargo Liner
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
-
Features:
- Guaranteed Not To Crack Or Break
- Custom Fit Designed To Specifically Fit Your Vehicle
- Installs Easily In Seconds With No Screws Bolts Fasteners
- Tough And Durable Rubberized Material Resistant To Most Chemicals
- Resists Most Chemicals
- Prevents Stains And Soiling Of Your Carpeted Areas
- Non-Slip Surface
- Minimal Shifting
- Our Cargo Liners Protect And Defend Your Trunk And Cargo Areas From Whatever You Throw At Them. These Liners Are Custom Fit With High Perimeter Edges And A Anti-slip Surface, Minimizing Slipping And Sliding As Well As Protecting Your Rig From Inevitable Spills And Mess.
Additional Fitment Information:
| Vehicle |
|---|
| 2009 - Jeep Patriot |
- Front Floor Mats
- Black; 2 piece
- HD FRONT FLOOR MATS
- Heavy Duty Floor Mat
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
- Style: Molded
-
Features:
- Guaranteed Not To Crack Or Break
- 0.3750 in. High Ridges
- Up To 40 percent Taller Ridges
- Extra Thick Driver Heal Pad
- Nibs On Back-Prevent Slippage
- Easily Cleaned
- Made In USA
- Year Round Protection
- Available for virtually all of today's top selling vehicles, Husky Liners Heavy Duty Floor Mats are made ultra tough to take whatever abuse you throw at them. Other mats have met their match.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2009 - Jeep Wrangler | Front |
Showing 1 - 10 of 7242 products
Loading...