1985 Pontiac Suspension Parts
Choose a Model for your 1985 Pontiac
Image
Product
Price
- Jounce Bumper and Bellows
- Boot Kits
-
Features:
- Superior quality boot helps protect the strut shaft from leak-causing dirt and debris
- Poly foam bumper prevents the strut from bottoming out
- Built with design and quality that matches or exceeds OE
- Protects the upper seal and bushing
- KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
143059, 63620
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1985 - Pontiac Fiero | Rear |
- Jounce Bumper and Bellows
- Boot Kits
-
Features:
- Superior quality boot helps protect the strut shaft from leak-causing dirt and debris
- Poly foam bumper prevents the strut from bottoming out
- Built with design and quality that matches or exceeds OE
- Protects the upper seal and bushing
- KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
143058, 63618
Additional Fitment Information:
| Vehicle | Position | Region |
|---|---|---|
| 1985 - Pontiac Sunburst | Front | Canada |
- High Pressure Monotube Gas Shock
- Monotube Performance Upgrade
- Gas-a-just
- Product Attributes:
- Internal Rebound Spring: N
- Lower Mount Type: E3(51.6x82x20)
- Upper Mount Type: S1
- Compressed Length: 9.65
- Dust Cover Included: N
- Extended Length: 14.57
- Stroke Length: 4.92
- Internal Rebound Bumper: Y
- Includes Bump Stop: N
-
Features:
- Adds up to 25% more damping performance over original equipment shocks
- Components and valving designed specifically for classic cars
- Gas-a-Just monotubes include additional damping over OE design for vehicles that work, tow, and have larger, heavier tires & wheels
- High pressure monotube design separates the gas and oil for fade free operation and instant response
- Fluid leaking can be a cause of shock failure, the KYB Gas-a-just has an ultra-smooth triple chrome plated chrome piston rod to reduce seal wear
- The higher gas pressure of the KYB Gas-a-Just responds quickly to improve steering response
- Electronic safety systems depend on the suspension, brakes and tires operating as the vehicle manufacturer intended. The KYB Gas-a-just helps keep Electronic Safety Systems performing as designed.
- The KYB Gas-a-just monotube shock absorber has additional performance advantages over the traditional twin-tube design: It can instantly, automatically adjust to your performance needs and never experiences fade due to aeration. The KYB Gas-a-just has two separate working chambers: An air-free hydraulic piston and valve area for responsiveness and control, and a second high-pressure nitrogen gas area with a floating piston that provides a comfortable ride during normal driving and adds instant performance on demand.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
5906, 69675
Additional Fitment Information:
| Vehicle | Position | Body |
|---|---|---|
| 1985 - Pontiac Parisienne | Front | Sedan |
- High Pressure Monotube Gas Shock for Cars and Trucks
- Monotube Performance Upgrade
- Gas-a-just
- Product Attributes:
- Internal Rebound Spring: N
- Lower Mount Type: E3(46.6x82x20)
- Upper Mount Type: S1
- Compressed Length: 8.58
- Dust Cover Included: N
- Extended Length: 13.03
- Stroke Length: 4.45
- Internal Rebound Bumper: N
- Includes Bump Stop: N
-
Features:
- Adds up to 25% more damping performance over original equipment shocks
- Components and valving designed specifically for classic cars
- Gas-a-Just monotubes include additional damping over OE design for vehicles that work, tow, and have larger, heavier tires & wheels
- High pressure monotube design separates the gas and oil for fade free operation and instant response
- Fluid leaking can be a cause of shock failure, the KYB Gas-a-just has an ultra-smooth triple chrome plated chrome piston rod to reduce seal wear
- The higher gas pressure of the KYB Gas-a-Just responds quickly to improve steering response
- Electronic safety systems depend on the suspension, brakes and tires operating as the vehicle manufacturer intended. The KYB Gas-a-just helps keep Electronic Safety Systems performing as designed.
- The KYB Gas-a-just monotube shock absorber has additional performance advantages over the traditional twin-tube design: It can instantly, automatically adjust to your performance needs and never experiences fade due to aeration. The KYB Gas-a-just has two separate working chambers: An air-free hydraulic piston and valve area for responsiveness and control, and a second high-pressure nitrogen gas area with a floating piston that provides a comfortable ride during normal driving and adds instant performance on demand.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
5840, 69600
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1985 - Pontiac Bonneville | Front |
- High Pressure Monotube Gas Shock
- Monotube Performance Upgrade
- Gas-a-just
- Product Attributes:
- Internal Rebound Spring: N
- Lower Mount Type: E1
- Upper Mount Type: E3(61.6x87x20)
- Compressed Length: 13.54
- Dust Cover Included: Y
- Extended Length: 21.89
- Stroke Length: 8.74
- Internal Rebound Bumper: N
- Includes Bump Stop: N
-
Features:
- Adds up to 25% more damping performance over original equipment shocks
- Components and valving designed specifically for classic cars
- Gas-a-Just monotubes include additional damping over OE design for vehicles that work, tow, and have larger, heavier tires & wheels
- High pressure monotube design separates the gas and oil for fade free operation and instant response
- Fluid leaking can be a cause of shock failure, the KYB Gas-a-just has an ultra-smooth triple chrome plated chrome piston rod to reduce seal wear
- The higher gas pressure of the KYB Gas-a-Just responds quickly to improve steering response
- Electronic safety systems depend on the suspension, brakes and tires operating as the vehicle manufacturer intended. The KYB Gas-a-just helps keep Electronic Safety Systems performing as designed.
- The KYB Gas-a-just monotube shock absorber has additional performance advantages over the traditional twin-tube design: It can instantly, automatically adjust to your performance needs and never experiences fade due to aeration. The KYB Gas-a-just has two separate working chambers: An air-free hydraulic piston and valve area for responsiveness and control, and a second high-pressure nitrogen gas area with a floating piston that provides a comfortable ride during normal driving and adds instant performance on demand.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
550013, 69724
Additional Fitment Information:
| Vehicle | Position | Body |
|---|---|---|
| 1985 - Pontiac Parisienne | Rear | Sedan |
- Front Upper Suspension Ball Joint
- Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces
- MOOG K5208 Front Upper Suspension Ball Joint for Chevrolet S10
- Product Attributes:
- Cotter Pin Hole: Yes
- Adjustable: No
- Mounting Hardware Included: Yes
- Suspension Grade Type: Standard
- Mounting Hole Quantity: 4
- Mounting Type: Bolt-on
- Greaseable: Yes
- Material: Neoprene
-
Features:
- DESIGN CHANGE – New and improved follower ball joint design to extend product life and simplify installation
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
02-82008, 02-86021, 0282008E, 10233, 10268, 104231, 1268K, 14039014, 260-1091, 2601091, 2601091FT, 282008, 286021, 305135, 31026, 325831, 335877, 335878...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1985 - Pontiac Parisienne | Front Upper |
- Front Upper Suspension Ball Joint
- MOOG K5208 Front Upper Suspension Ball Joint for Chevrolet S10
- Product Attributes:
- Cotter Pin Hole: Yes
- Adjustable: No
- Mounting Hardware Included: Yes
- Suspension Grade Type: Standard
- Mounting Hole Quantity: 4
- Mounting Type: Bolt-on
- Greaseable: Yes
- Material: Neoprene
-
Features:
- DESIGN CHANGE – New and improved follower ball joint design to extend product life and simplify installation
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1985 - Pontiac Grand Prix | Front Upper |
- Front; Rear Suspension Stabilizer Bar Link Kit
- Standard Design
- MOOG K5252 Front; Rear Suspension Stabilizer Bar Link Kit for Chevrolet C1500
- Product Attributes:
- Sleeve Length:
- 1.220
- 31.0
- End 1 Type: Bolt On
- Bolt Length:
- 180.0
- 7.086
- Part Description: Suspension Stabilizer Bar Link Kit
- Sleeve Length:
-
Features:
- Improves upon OE designs
- Quiet, dependable operation
- Provides like-new steering, ease of installation and longer life
- Incorporates proven design and engineering features
- By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
06-82002, 06-82003, 11000, 14039143, 15571395, 15588797, 18060, 18074, 22598278, 265-1205, 265-1285, 265-1885, 265-1905, 265-1918, 265-2048, 265-2049, 2651285, 45G0013...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1985 - Pontiac Parisienne | Front |
- Front; Rear Suspension Stabilizer Bar Link Kit
- Standard Design
- MOOG K5252 Front; Rear Suspension Stabilizer Bar Link Kit for Chevrolet C1500
- Product Attributes:
- Sleeve Length:
- 1.220
- 31.0
- End 1 Type: Bolt On
- Bolt Length:
- 180.0
- 7.086
- Part Description: Suspension Stabilizer Bar Link Kit
- Sleeve Length:
-
Features:
- Improves upon OE designs
- Quiet, dependable operation
- Provides like-new steering, ease of installation and longer life
- Incorporates proven design and engineering features
- By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1985 - Pontiac Firebird | Rear |
- Gas Shock
- Recommended OEM Replacement
- Excel-G
- Product Attributes:
- Internal Rebound Spring: N
- Lower Mount Type: E3(46.1x82x0)
- Upper Mount Type: S1
- Compressed Length: 8.66
- Dust Cover Included: N
- Extended Length: 13.58
- Stroke Length: 4.92
- Internal Rebound Bumper: N
- Includes Bump Stop: N
-
Features:
- KYB recommended OEM replacement shock for classic, domestic cars
- The KYB Excel-G helps restore the designed control and handling of your vehicle
- The KYB Excel-G uses a triple lip fluid seal to reduce the chance of oil and gas leaking out
- Vehicle specific, hand assembled in-house damping valves correctly manage tire contact, steering response and body movement
- Made in USA
- Electronic safety systems depend on the suspension, brakes and tires operating as the vehicle manufacturer intended. The KYB Excel-G helps keep Electronic Safety Systems performing as designed.
- KYB has the strongest and thickest strut bodies and brackets in the industry
- minimizing flex to maintain correct alignment in all conditions
- Ride Comfort may be important, but restoring a vehicles Ride Control, stability, stopping, lane change responsiveness and handling is critical. KYB Excel-G Shocks and Struts are designed for the most important performance purpose: Restoring the vehicles original capabilities. KYB is a world leading supplier of shocks and struts to new vehicle manufacturers and the Excel-G is made on the very same KYB OE assembly lines, uses the same OE quality components and is calibrated to restore original, designed performance, not change it. That has earned Excel-G the classification: OEA (Original Equipment for the Aftermarket). The KYB Excel-G is a nitrogen gas-charged, twin-tube design that includes every quality component that our global OEM products include and it is the preferred choice by professional technicians.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
5801, 69600
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1985 - Pontiac Bonneville | Front |
Showing 1 - 10 of 192 products
Loading...