Image
Product
Price
- Jounce Bumper and Bellows
- Strut Boots
- Product Attributes:
- Feature and Benefit 4: Protects The Upper Seal And Bushing
- Feature and Benefit 1: Superior Quality Boot Helps Protect The Strut Shaft From Leak-causing Dirt And Debris
- Feature and Benefit 3: Built With Design And Quality That Matches Or Exceeds Oe
- Feature and Benefit 2: Poly Foam Bumper Prevents The Strut From Bottoming Out
- KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
143060, 63622
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2003 - Mitsubishi Lancer | Front | Evolution |
- Ball Joint
- Fits OE Arm and Aftermarket Arms with Maximum Press-Fit Diameter of 1.571 (in)
- MOOG K500063 Ball Joint
- Product Attributes:
- Cotter Pin Hole: No
- Adjustable: No
- Suspension Grade Type: Standard
- Mounting Hole Quantity: 0
- Castle Nut Included: No
- Mounting Type: Press-in
- Greaseable: Yes
-
Features:
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Aspiration |
|---|---|---|
| 2003 - Mitsubishi Lancer | Front Lower | Naturally Aspirated |
- Ball Joint
- Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces Fits OE Arm and Aftermarket Arms with Maximum Press-Fit Diameter of 1.571 (in) Original Equipment (OE) Presses In From Below Requires Replacement Joint To Be Pressed In From Above Arm
- MOOG K500063 Ball Joint
- Product Attributes:
- Cotter Pin Hole: No
- Adjustable: No
- Suspension Grade Type: Standard
- Mounting Hole Quantity: 0
- Castle Nut Included: No
- Mounting Type: Press-in
- Greaseable: Yes
-
Features:
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
104500063, 260-1724, 45D2401, 46D2401A, 505-1417, 505-1417B, 5105040AA, 5105040AB, 5105040AC, 5105040AD, 5105040AE, 5105040AF, 5105040AG, 5105040AH, 5105040AI, 5105041AA, 5105041AB, 5105041AC...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Aspiration |
|---|---|---|
| 2003 - Mitsubishi Lancer | Front Lower | Naturally Aspirated |
- Strut-Mate Suspension Strut Bellows
- Monroe Shocks & Struts Strut-Mate 63631 Suspension Strut Bellows
- Monroe Strut-Mate Strut Boot Kit
- Heavy-duty construction and unique design features make the Monroe® Strut-Mate® boot kit the quality choice for maximum rod protection and improved strut life. Damaged boots may not protect the rod finish. A pitted piston rod can lead to premature strut failure. Deteriorated OE bumpers may not offer adequate protection from severe suspension movement, leading to premature strut failure.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
143057, 143059, 5171132AB, 5171132AC, SB103, SB129
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2003 - Mitsubishi Galant | Front |
- Weight Capacity 14000 lbs. For Cast Lower Control Arms
- Suspension Enhancement System; Weight Capacity 14000 lbs.; Front;
- Suspension Enhancement System
- Product Attributes:
- Usage:
- Heavy Duty Truck
- Medium Duty Truck
- Axle Style: N/a
- Usage:
-
Features:
- Eliminate Suspension Sag And Cushion Road Shock
- Reduce Sway And Improve Roll Stability
- Easy To Install With Basic Hand Tools
- Improves Roll Control
- Trouble And Maintenance Free
- Satisfaction Guarantee And Lifetime Warranty
- Leader In The Snow Plow Industry
- Leaders In Rubber Spring Technology Since 1965
- Timbren Suspension Kits (SES Kits) are designed to enhance the suspension of your vehicle. Easiest to use: Rubber cushions absorb road shocks and automatically adjust to uneven loads or road conditions. Easiest to maintain: There are no airlines or fittings to allow leaks. Simply bolt the kit on and you are set for a lifetime of trouble free suspension.Easiest to install: There are no holes to drill, no airlines to route and SES Kits can be installed in a matter of minutes using basic hand tools. The softer ride quality of todays trucks and the mediocre suspensions found on most trailers can cause excessive trailer sway, instability and suspension settling.Timbrens high performance suspension packages will ensure added safety and peace of mind.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2003 - Mitsubishi Montero | Front |
- Camber Adjusting Kit
- From Minus 1-3/4 to Plus 1-3/4 Degrees of Change Single Offset Adjuster with 14 (mm) Bolts
- MOOG K90474 Camber Adjusting Kit
-
Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
- By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
13322A, 264-3642, 41214, 45K18036, 616-1030, 616-1036, 787504, AA3642, AK90399, K90474, MS50202, MS60005, VV13322A
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2003 - Mitsubishi Outlander | Front |
- Stabilizer Bar Link Kit
- MOOG K90389 Stabilizer Bar Link Kit
- Product Attributes:
- Sleeve Length:
- 0.984
- 25.0
- End 1 Type: Bolt On
- Bolt Length:
- 126.5
- 4.980
- Sleeve Length:
-
Features:
- Improves upon OE designs
- Quiet, dependable operation
- Provides like-new steering, ease of installation and longer life
- Incorporates proven design and engineering features
- By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
101-5951, 18335, 265-1522, 45G0312, 46G0312A, 536-685, 545-1312, 545-1312B, 606.42069, JTS708, K90389, MK90389, SK90389, SL400
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2003 - Mitsubishi Lancer | Rear |
- Camber Adjusting Kit
- From Minus 1-3/4 to Plus 1-3/4 Degrees of Change Single Offset Adjuster with 12 (mm) Bolts
- MOOG K90473 Camber Adjusting Kit
-
Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
- By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
13321A, 264-3641, 41212, 413541, 45K18031, 45K18035, 616-1035, 6161031, 770500, AA3641, K90473, MS90002, VV13321A
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2003 - Mitsubishi Diamante | Front |
- Camber Adjusting Kit
- From Minus 1-3/4 to Plus 1-3/4 Degrees of Change Single Offset Adjuster with 12 (mm) Bolts
- MOOG K90473 Camber Adjusting Kit
-
Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
- By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2003 - Mitsubishi Eclipse | Rear |
- Camber Adjusting Kit
- Single Offset Adjuster with 16 (mm) Bolts From Minus 1-3/4 to Plus 1-3/4 Degrees of Change Adapter Plate Not Included
- MOOG K90476 Camber Adjusting Kit
-
Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
- By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
13324A, 264-3644, 3544, 41216, 41216B, 45K18038, 616-1032, 616-1038, 616-1038B, AA3644, AK90409, VV13324A
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2003 - Mitsubishi Eclipse | Front |
Showing 1 - 10 of 275 products
Loading...