Image
Product
Price
- Schrader EZ-sensor Snap-in
- Use 33560 if 33500 is not available Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm Attachment Type: Snap-in Angle Type: Fixed Angled Stem: Fixed angle Plastic Housing Material Nickel-Coated Core
- Programmable for 314.9, 315 and 433MHz Applications
- Product Attributes:
- Washer Included: No
- Mounting Hardware Included: Yes
- Grommets Included: No
- Manufacturer Warranty: 2 Years
- California Prop 65 Warning Label (Text): Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects And Other Reproductive Harm. For More Information, Go To Www.p65warnings.ca.gov
- Recommended Torque (in/Lbs): 11.5 Inch/lbs.
- Valve Stem Included: Yes
- Monitor Type: Direct
- Real Time Pressure Signal Transmission: Yes
- Attachment Type:
- Snap-fit
- Snap-in
- Mounting Location: Wheel
- Valve Stem Material: Rubber
- Programmed/Programmable: Programmable
- Frequency: 315 / 314.9 / 433
- Activation Type: Not Programmed, Programmable
- Core Material: Nickel-coated
- Recommended Torque (N-m): 1.3 N-m
- Valve Cap Included: Yes
- Valve Color: Black
- Material: Rubber
- Power Source: Battery
-
Features:
- Easy to program and covers the majority of vehicles on the road in North America
- Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
- Engineered and manufactured to OEM design and quality specifcations
- Rubber valve can be replaced by Schrader rubber snap-in valve kit 20018, or with clamp-in fixed aluminum valve stem 34000 (silver) or 34010 (black)
- Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- Always make sure that your TPMS scan and programming tool has the latest software installed to ensure maximum coverage
- Schrader Programmable EZ-sensor with Rubber Snap-In Valve - Must be Programmed to Specific M/M/Y Vehicle
- Sensor comes fully assembled and ready to program and install
- Future-proofed OE quality TPMS product supports new and pending OE technologies
- Schrader EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. Each EZ-sensor must be programmed before installation and needs a compatible TPMS programming tool.This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. EZ-sensor can be interchanged with Schrader replacement rubber snap-in valve stems or fixed angle aluminum clamp-in stems. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.
Additional Fitment Information:
| Vehicle |
|---|
| 2019 - Honda Pilot |
- TPMS Service Kit 20032 (Clamp-in Components)
- Mounting Method: Clamp-In components Torque: Nut torque = 35in-lbs, 4Nm; Valve core torque = 3.5 in-lbs, 0.4Nm Max Speed Rating: 130 Max Pressure Rating: 102 Frequency: 315.0 MHz Without Mounting Hardware Valve Not Included Valve Cap Not Included Valve Stem Not Included Washer Not Included Quantity Included: 1
-
Features:
- OE fit, form, and function
- Each kit includes everything you need to properly service TPMS-equipped wheel and tire assemblies
- Replacement components in Schrader TPMS service kits are sensor specific
- Ready out of the box
- Valve cores are nickel-plated to improve durability and help prevent rust and corrosion
- Schrader is a pioneer in TPMS, a vehicle safety feature that is now standard on all cars and light trucks sold in the U.S. Schrader’s direct TPMS technology can be found in over 50 percent of global OEM vehicle platforms.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
1100K, 609-107.1, 920215, TPM1100K
Additional Fitment Information:
| Vehicle |
|---|
| 2019 - Honda Pilot |
- Schrader 90 degree EZ-sensor - Programmable TPMS Sensor (Sensor Body Only)
- Use 33500 if 33900 is not available Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm Attachment Type: Clamp-in Angle Type: 90 degree No stem Nickel-Plated Brass Core
- Product Attributes:
- Washer Included: No
- Manufacturer Warranty: 2 Years
- Grommets Included: Yes
- California Prop 65 Warning Label (Text): Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects And Other Reproductive Harm. For More Information, Go To Www.p65warnings.ca.gov
- Recommended Torque (in/Lbs): 53 Inch/lbs.
- Valve Stem Included: No
- Attachment Type: Clamp-in
- Mounting Location: Wheel
- Programmed/Programmable: Programmed
- Frequency: 314.9mhz, 315mhz, 433mhz
- Core Material: Nickel-plated Brass
- Recommended Torque (N-m): 6 N-m
- Valve Cap Included: No
-
Features:
- Easy to program and covers the majority of vehicles on the road in North America
- Interchangeable with clamp-in fixed aluminum valve stem, available in silver and matte black
- Future-proofed OE quality TPMS product supports new and pending OE technologies
- Valve cores are nickel-plated to improve durability and help prevent rust and corrosion
- Ready out of the box
- OE fit, form, and function
- Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
- Each kit includes everything you need to properly service TPMS-equipped wheel and tire assemblies
- Replacement components in Schrader TPMS service kits are sensor specific
- Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- OE fit, form, and function validated and engineered by over 350 engineers dedicated to TPMS
- Schrader EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. EZ-sensor can be interchanged with rubber snap-in valve stems or fixed angle aluminum clamp-in stems, available in silver and matte black. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service. Each EZ-sensor must be programmed before installation and needs a compatible TPMS programming tool.
Additional Fitment Information:
| Vehicle | Region |
|---|---|
| 2019 - Honda Clarity | Canada |
- Programmable EZ-sensor - Black Straight Valve - 90 Degree
- Use 33500 if 33983 is not available Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm Attachment Type: Clamp-in Angle Type: 90 degree Straight Stem: Mounted relative to sensor body Black Stem
- Product Attributes:
- Attachment Type: Clamp-in
- Power Source: Battery
-
Features:
- Replacement components in Schrader TPMS service kits are sensor specific
- OE fit, form, and function
- Each kit includes everything you need to properly service TPMS-equipped wheel and tire assemblies
- OE fit, form, and function validated and engineered by over 350 engineers dedicated to TPMS
- Ready out of the box
- Interchangeable with clamp-in fixed aluminum valve stem, available in silver and matte black
- Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
- Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- Valve cores are nickel-plated to improve durability and help prevent rust and corrosion
- Future-proofed OE quality TPMS product supports new and pending OE technologies
- Easy to program and covers the majority of vehicles on the road in North America
- Schrader recommends replacing service kit components using genuine Schrader TPMS service kits at every tire change. Please use Schrader supplied original replacement parts to invoke the warranty. All pieces in the kit are intended for one-time use only. TPMS service Pks are not DIY products and require appropriate skills, knowledge, and equipment for service.
Additional Fitment Information:
| Vehicle | Region |
|---|---|
| 2019 - Honda Civic | United States |
- Programmable EZ-sensor - Black Angled Valve - 90 Degree
- Use 33500 if 33982 is not available Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm Attachment Type: Clamp-in Angle Type: 90 degree Straight Stem: Mounted relative to sensor body Black Stem
- Product Attributes:
- Attachment Type: Clamp-in
- Power Source: Battery
-
Features:
- OE fit, form, and function validated and engineered by over 350 engineers dedicated to TPMS
- Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- Future-proofed OE quality TPMS product supports new and pending OE technologies
- Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
- Ready out of the box
- Easy to program and covers the majority of vehicles on the road in North America
- Replacement components in Schrader TPMS service kits are sensor specific
- OE fit, form, and function
- Valve cores are nickel-plated to improve durability and help prevent rust and corrosion
- Each kit includes everything you need to properly service TPMS-equipped wheel and tire assemblies
- Interchangeable with clamp-in fixed aluminum valve stem, available in silver and matte black
- Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.
Additional Fitment Information:
| Vehicle |
|---|
| 2019 - Honda Pilot |
- 16 Inch 5 Spoke Silver Black Set Of 4
- Gloss Painted Black/ Silver
- 16 Inch 5 Spoke Silver Color/ Black Plastic Set Of 4
- Wheel Cover
- Product Attributes:
- Quantity: Set Of 4
-
Features:
- Quick And Cost Effective Alternative To Replacing Factory OEM Wheel Covers
- Limited 90 Day Warranty
- Restyle, refresh or upgrade a base trim level vehicle with our quality factory replacement wheel covers. These covers emulate factory styling and are available in different finishes and retention styles. Also available is a large line of factory replacement center caps and trim rings for both today?s vehicles and the vintage restoration market. Our high quality wheel covers, center caps and trim rings are designed and manufactured for fitment, quality and styling.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2019 - Honda Civic | LX |
- Set Of 4
- Gloss Painted Black
- Set Of 4
- Wheel Cover
- Product Attributes:
- Quantity: Set Of 4
- Retention: Plastic Leg
- Compatible With Steel Wheels: Yes
- Factory Center Fits In Cover: No
-
Features:
- Designed and manufactured for quality fitment and finish
- Easy to install, long lasting finish
- Manufactured with automotive grade ABS, Quality and durable product
- Emulates factory styling and enhances OEM design
- Dual layer of clear, enhances and protects paint
- Factory style retention, OEM fitment
- Restyle, refresh or upgrade a base trim level vehicle with our quality factory replacement wheel covers. These covers emulate factory styling. Our high quality wheel covers, center caps and trim rings are designed and manufactured for fitment, quality and styling.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2019 - Honda Civic | Sport Touring |
- Set Of 4
- Gloss Painted Single Tone Black
- Not Compatible With Steel Wheels
- IMPOSTOR ®
- Product Attributes:
- Quantity: Set Of 4
- Compatible With Steel Wheels: No
-
Features:
- Manufactured With Automotive Grade Abs/Durable
- Upgrades Oem Wheel Appearance/Increased Aesthetic Value And Trim Level Appearance
- Designed And Manufactured To Fit Over And Into The Oem Wheel/Easy Installation
- CCI offers one of the largest selection of automotive wheel restyling accessories for cars, trucks, and suv's. All CCI products are designed and manufactured for both quality and fitment and carry a limited lifetime guarantee.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2019 - Honda HR-V | LX |
- Set Of 4
- Gloss Painted Black
- Set Of 4
- Wheel Cover
- Product Attributes:
- Quantity: Set Of 4
- Retention: Plastic Leg
- Compatible With Steel Wheels: Yes
- Factory Center Fits In Cover: No
-
Features:
- Designed and manufactured for quality fitment and finish
- Easy to install, long lasting finish
- Manufactured with automotive grade ABS, Quality and durable product
- Emulates factory styling and enhances OEM design
- Dual layer of clear, enhances and protects paint
- Factory style retention, OEM fitment
- Product care, regular vehicle cleaning of dirt, grime or salt twice a month, year round. Appling a high-quality wax to help protect and maintain the finish of the product is recommended. Use only non-abrasive automotive wax. Use of any soap, polish or wax that contains an abrasive is detrimental and can scratch the finish leading to corrosion. Do not use harsh cleaners or chemicals that could damage the finish. Failure to keep your product clean may result in pitting and or peeling.
Additional Fitment Information:
| Vehicle |
|---|
| 2019 - Honda Fit |
- Set Of 4
- Gloss Painted Black/ Silver
- Set Of 4
- Wheel Cover
- Product Attributes:
- Quantity: Set Of 4
- Retention: Plastic Leg
- Compatible With Steel Wheels: Yes
- Factory Center Fits In Cover: No
-
Features:
- Designed and manufactured for quality fitment and finish
- Easy to install, long lasting finish
- Manufactured with automotive grade ABS, Quality and durable product
- Emulates factory styling and enhances OEM design
- Dual layer of clear, enhances and protects paint
- Factory style retention, OEM fitment
- Restyle, refresh or upgrade a base trim level vehicle with our quality factory replacement wheel covers. These covers emulate factory styling. In addition, we have a complementary line of factory replacement center caps and trim rings for both today?s vehicles and the vintage restoration market. Our high quality wheel covers, center caps and trim rings are designed and manufactured for fitment, quality and styling.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2019 - Honda Civic | Sport Touring |
Showing 1 - 10 of 84 products
Loading...