Image
Product
Price
- Schrader EZ-sensor Snap-in
- Use 33560 if 33500 is not available Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm Attachment Type: Snap-in Angle Type: Fixed Angled Stem: Fixed angle Plastic Housing Material Nickel-Coated Core
- Programmable for 314.9, 315 and 433MHz Applications
- Product Attributes:
- Washer Included: No
- Mounting Hardware Included: Yes
- Grommets Included: No
- Manufacturer Warranty: 2 Years
- California Prop 65 Warning Label (Text): Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects And Other Reproductive Harm. For More Information, Go To Www.p65warnings.ca.gov
- Recommended Torque (in/Lbs): 11.5 Inch/lbs.
- Valve Stem Included: Yes
- Monitor Type: Direct
- Real Time Pressure Signal Transmission: Yes
- Attachment Type:
- Snap-fit
- Snap-in
- Mounting Location: Wheel
- Valve Stem Material: Rubber
- Programmed/Programmable: Programmable
- Frequency: 315 / 314.9 / 433
- Activation Type: Not Programmed, Programmable
- Core Material: Nickel-coated
- Recommended Torque (N-m): 1.3 N-m
- Valve Cap Included: Yes
- Valve Color: Black
- Material: Rubber
- Power Source: Battery
-
Features:
- Easy to program and covers the majority of vehicles on the road in North America
- Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
- Engineered and manufactured to OEM design and quality specifcations
- Rubber valve can be replaced by Schrader rubber snap-in valve kit 20018, or with clamp-in fixed aluminum valve stem 34000 (silver) or 34010 (black)
- Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- Always make sure that your TPMS scan and programming tool has the latest software installed to ensure maximum coverage
- Schrader Programmable EZ-sensor with Rubber Snap-In Valve - Must be Programmed to Specific M/M/Y Vehicle
- Sensor comes fully assembled and ready to program and install
- Future-proofed OE quality TPMS product supports new and pending OE technologies
- Schrader EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. Each EZ-sensor must be programmed before installation and needs a compatible TPMS programming tool.This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. EZ-sensor can be interchanged with Schrader replacement rubber snap-in valve stems or fixed angle aluminum clamp-in stems. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.
Additional Fitment Information:
| Vehicle |
|---|
| 2021 - Honda Passport |
- Programmable EZ-sensor - Black Straight Valve - 90 Degree
- Use 33500 if 33983 is not available Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm Attachment Type: Clamp-in Angle Type: 90 degree Straight Stem: Mounted relative to sensor body Black Stem
- Product Attributes:
- Attachment Type: Clamp-in
- Power Source: Battery
-
Features:
- Replacement components in Schrader TPMS service kits are sensor specific
- OE fit, form, and function
- Each kit includes everything you need to properly service TPMS-equipped wheel and tire assemblies
- OE fit, form, and function validated and engineered by over 350 engineers dedicated to TPMS
- Ready out of the box
- Interchangeable with clamp-in fixed aluminum valve stem, available in silver and matte black
- Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
- Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- Valve cores are nickel-plated to improve durability and help prevent rust and corrosion
- Future-proofed OE quality TPMS product supports new and pending OE technologies
- Easy to program and covers the majority of vehicles on the road in North America
- Schrader recommends replacing service kit components using genuine Schrader TPMS service kits at every tire change. Please use Schrader supplied original replacement parts to invoke the warranty. All pieces in the kit are intended for one-time use only. TPMS service Pks are not DIY products and require appropriate skills, knowledge, and equipment for service.
Additional Fitment Information:
| Vehicle |
|---|
| 2021 - Honda Pilot |
- Schrader 90 degree EZ-sensor - Programmable TPMS Sensor (Sensor Body Only)
- Use 33500 if 33900 is not available Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm Attachment Type: Clamp-in Angle Type: 90 degree No stem Nickel-Plated Brass Core
- Product Attributes:
- Washer Included: No
- Manufacturer Warranty: 2 Years
- Grommets Included: Yes
- California Prop 65 Warning Label (Text): Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects And Other Reproductive Harm. For More Information, Go To Www.p65warnings.ca.gov
- Recommended Torque (in/Lbs): 53 Inch/lbs.
- Valve Stem Included: No
- Attachment Type: Clamp-in
- Mounting Location: Wheel
- Programmed/Programmable: Programmed
- Frequency: 314.9mhz, 315mhz, 433mhz
- Core Material: Nickel-plated Brass
- Recommended Torque (N-m): 6 N-m
- Valve Cap Included: No
-
Features:
- Easy to program and covers the majority of vehicles on the road in North America
- Interchangeable with clamp-in fixed aluminum valve stem, available in silver and matte black
- Future-proofed OE quality TPMS product supports new and pending OE technologies
- Valve cores are nickel-plated to improve durability and help prevent rust and corrosion
- Ready out of the box
- OE fit, form, and function
- Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
- Each kit includes everything you need to properly service TPMS-equipped wheel and tire assemblies
- Replacement components in Schrader TPMS service kits are sensor specific
- Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- OE fit, form, and function validated and engineered by over 350 engineers dedicated to TPMS
- Schrader EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. EZ-sensor can be interchanged with rubber snap-in valve stems or fixed angle aluminum clamp-in stems, available in silver and matte black. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service. Each EZ-sensor must be programmed before installation and needs a compatible TPMS programming tool.
Additional Fitment Information:
| Vehicle |
|---|
| 2021 - Honda Pilot |
- Programmable EZ-sensor - Black Angled Valve - 90 Degree
- Use 33500 if 33982 is not available Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm Attachment Type: Clamp-in Angle Type: 90 degree Straight Stem: Mounted relative to sensor body Black Stem
- Product Attributes:
- Attachment Type: Clamp-in
- Power Source: Battery
-
Features:
- OE fit, form, and function validated and engineered by over 350 engineers dedicated to TPMS
- Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- Future-proofed OE quality TPMS product supports new and pending OE technologies
- Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
- Ready out of the box
- Easy to program and covers the majority of vehicles on the road in North America
- Replacement components in Schrader TPMS service kits are sensor specific
- OE fit, form, and function
- Valve cores are nickel-plated to improve durability and help prevent rust and corrosion
- Each kit includes everything you need to properly service TPMS-equipped wheel and tire assemblies
- Interchangeable with clamp-in fixed aluminum valve stem, available in silver and matte black
- Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.
Additional Fitment Information:
| Vehicle |
|---|
| 2021 - Honda Ridgeline |
- Set Of 4
- Gloss Painted Black/ Silver
- Set Of 4
- Wheel Cover
- Product Attributes:
- Quantity: Set Of 4
- Retention: Plastic Leg
- Compatible With Steel Wheels: Yes
- Factory Center Fits In Cover: No
-
Features:
- Designed and manufactured for quality fitment and finish
- Easy to install, long lasting finish
- Manufactured with automotive grade ABS, Quality and durable product
- Emulates factory styling and enhances OEM design
- Dual layer of clear, enhances and protects paint
- Factory style retention, OEM fitment
- Restyle, refresh or upgrade a base trim level vehicle with our quality factory replacement wheel covers. These covers emulate factory styling. In addition, we have a complementary line of factory replacement center caps and trim rings for both today?s vehicles and the vintage restoration market. Our high quality wheel covers, center caps and trim rings are designed and manufactured for fitment, quality and styling.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2021 - Honda Civic | Sport |
- 16 Inch 5 Spoke Silver Black Set Of 4
- Gloss Painted Black/ Silver
- 16 Inch 5 Spoke Silver Color/ Black Plastic Set Of 4
- Wheel Cover
- Product Attributes:
- Quantity: Set Of 4
-
Features:
- Quick And Cost Effective Alternative To Replacing Factory OEM Wheel Covers
- Limited 90 Day Warranty
- Restyle, refresh or upgrade a base trim level vehicle with our quality factory replacement wheel covers. These covers emulate factory styling and are available in different finishes and retention styles. Also available is a large line of factory replacement center caps and trim rings for both today?s vehicles and the vintage restoration market. Our high quality wheel covers, center caps and trim rings are designed and manufactured for fitment, quality and styling.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2021 - Honda Civic | LX |
- Set Of 4
- Chrome Plated Silver
- Not Compatible With Steel Wheels
- IMPOSTOR ®
- Product Attributes:
- Quantity: Set Of 4
- Compatible With Steel Wheels: No
-
Features:
- Manufactured With Automotive Grade Abs/Durable
- Upgrades Oem Wheel Appearance/Increased Aesthetic Value And Trim Level Appearance
- Designed And Manufactured To Fit Over And Into The Oem Wheel/Easy Installation
- CCI offers one of the largest selection of automotive wheel restyling accessories for cars, trucks, and suv's. All CCI products are designed and manufactured for both quality and fitment and carry a limited lifetime guarantee.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2021 - Honda HR-V | LX |
- Set Of 4
- Gloss Painted Single Tone Black
- Not Compatible With Steel Wheels
- IMPOSTOR ®
- Product Attributes:
- Quantity: Set Of 4
- Compatible With Steel Wheels: No
-
Features:
- Manufactured With Automotive Grade Abs/Durable
- Upgrades Oem Wheel Appearance/Increased Aesthetic Value And Trim Level Appearance
- Designed And Manufactured To Fit Over And Into The Oem Wheel/Easy Installation
- CCI offers one of the largest selection of automotive wheel restyling accessories for cars, trucks, and suv's. All CCI products are designed and manufactured for both quality and fitment and carry a limited lifetime guarantee.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2021 - Honda HR-V | LX |
- Set of 4
- Gloss Painted Single Tone Black
- Gloss Black Finish
- IMPOSTOR ®
- Product Attributes:
- Quantity: Set Of 4
- Compatible With Steel Wheels: No
-
Features:
- DESIGNED AND MANUFACTURED TO FIT OVER AND INTO THE OEM WHEEL / EASY INSTALLATION
- MANUFACTURED WITH AUTOMOTIVE GRADE ABS / DURABLE
- UPGRADES OEM WHEEL APPEARANCE / INCREASED AESTHETIC VALUE AND TRIM LEVEL APPEARANCE
- CCI offers one of the largest selection of automotive wheel restyling accessories for cars, trucks, and suv's. All CCI products are designed and manufactured for both quality and fitment and carry a limited lifetime guarantee.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2021 - Honda Accord | LX |
- Dorman MULTi-FIT (433) Programmable Tire Pressure Monitoring System Sensor
- Sensor Only; 433 MHz Requires MULTi-FIT Programming Tool Sell Until Depleted
- Product Attributes:
- Frequency:
- 433 Mhz
- 433mhz
- Contenidos del paquete:
- 1 Sensor Del Sistema De Monitoreo De Presión De La Llanta Programable
- 1 Tornillo De Montaje
- 1 Válvula De Sujeción Completa
- Frequency:
-
Features:
- Versatile replacement - this programmable TPMS sensor can replace the factory sensor on vehicles with tire pressure monitoring systems that operate on 433 MHz frequency
- Programming required - this sensor must be cloned to match the original sensor or calibrated to vehicle specification using the MULTi-FIT II programming tool (sold separately
- part number 974-505)
- Durable construction - this sensor is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality - backed by a team of product experts in the United States and more than a century of automotive experience
- This programmable 433 MHz TPMS sensor matches the function of the original sensor on a variety of specified vehicles. Using the Dorman MULTi-FIT II programming tool, it can be calibrated by vehicle specification or can be cloned to match the sensor it's replacing. Each one is made of quality materials and engineered for durability. (MULTi-FIT II tool sold separately; part number 974-505)
This Part Fits the Following OEM/Substitute Numbers:
0008223306, 0009057200, 0025400217, 0025408017, 0025409517, 0035400217, 13172567, 13227143, 24437708, 31280296, 31280297, 31302096, 31341893, 31445474, 36106790054, 36106856227, 36106874829, 36118378682...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2021 - Honda Pilot |
Showing 1 - 10 of 69 products
Loading...