2022 Chrysler Tire and Wheel Parts
Choose a Model for your 2022 Chrysler
Image
Product
Price
- Schrader EZ-sensor Snap-in
- Use 33560 if 33500 is not available Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm Attachment Type: Snap-in Angle Type: Fixed Angled Stem: Fixed angle Plastic Housing Material Nickel-Coated Core
- Programmable for 314.9, 315 and 433MHz Applications
- Product Attributes:
- Washer Included: No
- Mounting Hardware Included: Yes
- Grommets Included: No
- Manufacturer Warranty: 2 Years
- California Prop 65 Warning Label (Text): Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects And Other Reproductive Harm. For More Information, Go To Www.p65warnings.ca.gov
- Recommended Torque (in/Lbs): 11.5 Inch/lbs.
- Valve Stem Included: Yes
- Monitor Type: Direct
- Real Time Pressure Signal Transmission: Yes
- Attachment Type:
- Snap-fit
- Snap-in
- Mounting Location: Wheel
- Valve Stem Material: Rubber
- Programmed/Programmable: Programmable
- Frequency: 315 / 314.9 / 433
- Activation Type: Not Programmed, Programmable
- Core Material: Nickel-coated
- Recommended Torque (N-m): 1.3 N-m
- Valve Cap Included: Yes
- Valve Color: Black
- Material: Rubber
- Power Source: Battery
-
Features:
- Easy to program and covers the majority of vehicles on the road in North America
- Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
- Engineered and manufactured to OEM design and quality specifcations
- Rubber valve can be replaced by Schrader rubber snap-in valve kit 20018, or with clamp-in fixed aluminum valve stem 34000 (silver) or 34010 (black)
- Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- Always make sure that your TPMS scan and programming tool has the latest software installed to ensure maximum coverage
- Schrader Programmable EZ-sensor with Rubber Snap-In Valve - Must be Programmed to Specific M/M/Y Vehicle
- Sensor comes fully assembled and ready to program and install
- Future-proofed OE quality TPMS product supports new and pending OE technologies
- Schrader EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. Each EZ-sensor must be programmed before installation and needs a compatible TPMS programming tool.This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. EZ-sensor can be interchanged with Schrader replacement rubber snap-in valve stems or fixed angle aluminum clamp-in stems. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.
Additional Fitment Information:
| Vehicle |
|---|
| 2022 - Chrysler Voyager |
- Supersession (ACES) Replaces 28505; 28586 Mounting Method: Snap-in Torque: Screw torque = 11.5in-lbs, 1.3 Nm; Valve core torque = 3.5 in-lbs, 0.4Nm Max Speed Rating: 115 Max Pressure Rating: 80 Frequency: 433.0 MHz Housing Material: Plastic Without Mounting Hardware Pre-Programmed Not Programmable Valve Included Valve Cap Included Valve Core Material: Nickel Plated Valve Material: Rubber Valve Color: Black Valve Stem Included Washer Not Included Includes 1 TPMS sensor with valve Replaces ~28505~; ~28586~ Quantity Included: 1
- Product Attributes:
- Valve Material: Rubber
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
5777, 6813387AB, 68193586AB, 68193586AC, 68252493AA, 68313387AB, 68313387AC, 921310, 974-302, SE57775, SE57778, TPM298
Additional Fitment Information:
| Vehicle |
|---|
| 2022 - Chrysler Voyager |
- TPMS Sensor - Clamp-In Aluminum Valve
- Mounting Method: Clamp-In Torque: Nut torque = 53in-lbs, 6Nm; Valve core torque = 3.5 in-lbs, 0.4Nm Max Speed Rating: 130 Max Pressure Rating: 102 Frequency: 433.0 MHz Housing Material: Plastic Without Mounting Hardware Pre-Programmed Not Programmable Valve Included Valve Cap Not Included Valve Core Material: Nickel Plated Valve Material: Aluminum Valve Color: Silver Valve Stem Not Included Washer Not Included Includes 1 TPMS sensor with nut Quantity Included: 1
- Product Attributes:
- California Prop 65 Warning Label (Text): Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects And Other Reproductive Harm. For More Information, Go To Www.p65warnings.ca.gov
-
Features:
- OE fit, form and function validated and engineered by over 350 engineers dedicated to TPMS
- Ready out of the box
- Quick and easy installation that does not require programming
- Premium quality TPMS sensors produced in Schrader’s secure and highly automated OE manufacturing facilities
- 1 for 1 direct-fit OE replacement TPMS sensor services the specific make, model, and year
- Schrader is a pioneer in TPMS, a vehicle safety feature that is now standard on all cars and light trucks sold in the U.S. Schrader’s direct TPMS technology can be found in over 50 percent of global OEM vehicle platforms.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
50547691, 50554747, 68252495AC, 68443470AB
Additional Fitment Information:
| Vehicle |
|---|
| 2022 - Chrysler Grand Caravan |
- Programmable EZ-sensor - Black Straight Valve - 90 Degree
- Use 33500 if 33983 is not available Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm Attachment Type: Clamp-in Angle Type: 90 degree Straight Stem: Mounted relative to sensor body Black Stem
- Product Attributes:
- Attachment Type: Clamp-in
- Power Source: Battery
-
Features:
- Replacement components in Schrader TPMS service kits are sensor specific
- OE fit, form, and function
- Each kit includes everything you need to properly service TPMS-equipped wheel and tire assemblies
- OE fit, form, and function validated and engineered by over 350 engineers dedicated to TPMS
- Ready out of the box
- Interchangeable with clamp-in fixed aluminum valve stem, available in silver and matte black
- Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
- Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- Valve cores are nickel-plated to improve durability and help prevent rust and corrosion
- Future-proofed OE quality TPMS product supports new and pending OE technologies
- Easy to program and covers the majority of vehicles on the road in North America
- Schrader recommends replacing service kit components using genuine Schrader TPMS service kits at every tire change. Please use Schrader supplied original replacement parts to invoke the warranty. All pieces in the kit are intended for one-time use only. TPMS service Pks are not DIY products and require appropriate skills, knowledge, and equipment for service.
Additional Fitment Information:
| Vehicle |
|---|
| 2022 - Chrysler Voyager |
- Schrader 90 degree EZ-sensor - Programmable TPMS Sensor (Sensor Body Only)
- Use 33500 if 33900 is not available Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm Attachment Type: Clamp-in Angle Type: 90 degree No stem Nickel-Plated Brass Core
- Product Attributes:
- Washer Included: No
- Manufacturer Warranty: 2 Years
- Grommets Included: Yes
- California Prop 65 Warning Label (Text): Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects And Other Reproductive Harm. For More Information, Go To Www.p65warnings.ca.gov
- Recommended Torque (in/Lbs): 53 Inch/lbs.
- Valve Stem Included: No
- Attachment Type: Clamp-in
- Mounting Location: Wheel
- Programmed/Programmable: Programmed
- Frequency: 314.9mhz, 315mhz, 433mhz
- Core Material: Nickel-plated Brass
- Recommended Torque (N-m): 6 N-m
- Valve Cap Included: No
-
Features:
- Easy to program and covers the majority of vehicles on the road in North America
- Interchangeable with clamp-in fixed aluminum valve stem, available in silver and matte black
- Future-proofed OE quality TPMS product supports new and pending OE technologies
- Valve cores are nickel-plated to improve durability and help prevent rust and corrosion
- Ready out of the box
- OE fit, form, and function
- Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
- Each kit includes everything you need to properly service TPMS-equipped wheel and tire assemblies
- Replacement components in Schrader TPMS service kits are sensor specific
- Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- OE fit, form, and function validated and engineered by over 350 engineers dedicated to TPMS
- Schrader EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. EZ-sensor can be interchanged with rubber snap-in valve stems or fixed angle aluminum clamp-in stems, available in silver and matte black. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service. Each EZ-sensor must be programmed before installation and needs a compatible TPMS programming tool.
Additional Fitment Information:
| Vehicle |
|---|
| 2022 - Chrysler Grand Caravan |
- Programmable EZ-sensor - Black Angled Valve - 90 Degree
- Use 33500 if 33982 is not available Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm Attachment Type: Clamp-in Angle Type: 90 degree Straight Stem: Mounted relative to sensor body Black Stem
- Product Attributes:
- Attachment Type: Clamp-in
- Power Source: Battery
-
Features:
- OE fit, form, and function validated and engineered by over 350 engineers dedicated to TPMS
- Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- Future-proofed OE quality TPMS product supports new and pending OE technologies
- Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
- Ready out of the box
- Easy to program and covers the majority of vehicles on the road in North America
- Replacement components in Schrader TPMS service kits are sensor specific
- OE fit, form, and function
- Valve cores are nickel-plated to improve durability and help prevent rust and corrosion
- Each kit includes everything you need to properly service TPMS-equipped wheel and tire assemblies
- Interchangeable with clamp-in fixed aluminum valve stem, available in silver and matte black
- Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.
Additional Fitment Information:
| Vehicle |
|---|
| 2022 - Chrysler Voyager |
- M12-1.50 Serrated Wheel Stud - 14.42mm Knurl, 47.2mm Length
- Package Quantity: 10 Packaging Type: Box Thread Size: M12-1.50
- Product Attributes:
- Shoulder Length (In): 0.12 In
- SAE or Metric:
- Metric
- Métrico
- Knurl Diameter (In):
- 0.568 In
- 0.568 In.
- Quick-Start Nose:
- No
- Non
- Thread Direction:
- Clockwise (right)
- Rotar En El Sentido De Las Agujas Del Reloj (derecha)
- Thread Pitch:
- 1,5mm
- 1.5 Mm
- Estilo: Espárrago Dentado
- Longitud del reborde (in): 0.12 In
- Nariz de inicio rápido: No
- Under Head Length:
- 47.2 Mm
- 47.2mm
- Color:
- Plateado
- Silver
- Contenidos del paquete: 10 Espárragos
- Diámetro del nudo (in): 0.568 In.
- Material:
- Acero
- Steel
-
Features:
- Durable material - carbon steel meets SAE automotive industry standards for strength and hardness
- Corrosion resistant - extensive salt spray testing helps ensure years of durability against rust
- Tensile tested - lug studs undergo industry-standard proof-load testing to ensure strength
- Trustworthy quality - backed by team of professional engineers and quality control specialists in the United States
- These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2022 - Chrysler Voyager | Front |
- M12-1.50 Serrated Wheel Stud - 14.42mm Knurl, 47.2mm Length
- Package Quantity: 10 Packaging Type: Box Thread Size: M12-1.50
- Product Attributes:
- Shoulder Length (In): 0.12 In
- SAE or Metric:
- Metric
- Métrico
- Knurl Diameter (In):
- 0.568 In
- 0.568 In.
- Quick-Start Nose:
- No
- Non
- Thread Direction:
- Clockwise (right)
- Rotar En El Sentido De Las Agujas Del Reloj (derecha)
- Thread Pitch:
- 1,5mm
- 1.5 Mm
- Estilo: Espárrago Dentado
- Longitud del reborde (in): 0.12 In
- Nariz de inicio rápido: No
- Under Head Length:
- 47.2 Mm
- 47.2mm
- Color:
- Plateado
- Silver
- Contenidos del paquete: 10 Espárragos
- Diámetro del nudo (in): 0.568 In.
- Material:
- Acero
- Steel
-
Features:
- Durable material - carbon steel meets SAE automotive industry standards for strength and hardness
- Corrosion resistant - extensive salt spray testing helps ensure years of durability against rust
- Tensile tested - lug studs undergo industry-standard proof-load testing to ensure strength
- Trustworthy quality - backed by team of professional engineers and quality control specialists in the United States
- These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.
This Part Fits the Following OEM/Substitute Numbers:
6508707AA, 7B0601139
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2022 - Chrysler Voyager | Rear |
- Wheel Nut M12-1.50 Dometop - 19mm Hex, 31mm Length
- Aluminum Wheels Verify lug nut to wheel mating surface for proper and safe fitment OE Replacement Or Custom Performance: OE Replacement Thread Direction: Clockwise (Right) Package Quantity: 10 Packaging Type: Box Thread Type: Fine Steel Thread Size: M12-1.50 Overall Length: 1.22 in Color: Gray Wheel Nut Style: Dometop Capped Nut
- Product Attributes:
- Estilo del asiento: Base Cónica: 60°
- SAE or Metric:
- Metric
- Métrico
- Grade Type: Regular
- Thread Direction:
- Clockwise (right)
- Rotar En El Sentido De Las Agujas Del Reloj (derecha)
- Thread Pitch: 1.5
- Washers Included:
- No
- Non
- Thread Type:
- Fine
- Fino
- OE Replacement Or Custom Performance:
- Oe Replacement
- Reemplazo De Oe
- Wheel Lock Key Included:
- No
- Non
- Wheel Nut Style: Dometop Capped Nut
- Hex Size: 19 Mm
- Diseño de extremo abierto: No
- Color:
- Gray
- Gris
- Estilo de la tuerca de la rueda: Tuerca Reforzada De La Parte Superior Del Domo
- Contenidos del paquete: 10 Tuercas De La Rueda
- Seat Style: Conical Seat - 60 Deg
- Open End Design:
- No
- Non
- Material:
- Acero
- Steel
-
Features:
- Improved design - direct replacement, one-piece lug nut design, vs. two-piece factory design that often leads to premature failure of the wheel nut
- Corrosion resistant - by removing the veneer of the OEM lug nut design there's no chance of moisture and rust causing it to bulge and deform
- Thoroughly tested - part has undergone proof load, salt spray, hardness and thread check testing to meet strict standards
- Quality engineering - designed in the United States and backed by decades of automotive aftermarket experience
- The original lug nuts on certain vehicles have a failure-prone two-piece design that makes warping common and removal difficult. There's often a thin veneer that gets damaged with repeated use, and if moisture gets underneath it can cause the cover to bulge. Those failures can make the nuts difficult or impossible to remove, and if they get stuck, removing them usually requires damaging the wheel itself. This Dorman OE FIX replacement matches the OE fit and function but has a one-piece, carbon steel design to prevent similar issues from happening in the future.
This Part Fits the Following OEM/Substitute Numbers:
0060516382, 06509769AA, 36131113132, 559-074, 559-077, 60516382, 611074, 6500294, 6502738, 6509769AA, 6S4Z1012BA, 7976N, 7B0601141, 7B0601143A, 894101242, 8941012421, 8942228622, 8970227680...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2022 - Chrysler Voyager |
- Wheel Nut M12-1.50 Open Bulge Seat - 19mm Hex, 21.4mm Length
- Verify lug nut to wheel mating surface for proper and safe fitment OE Replacement Or Custom Performance: Custom Performance Thread Direction: Clockwise (Right) Package Quantity: 10 Packaging Type: Box Thread Type: Fine Steel Thread Size: M12-1.50 Overall Length: 0.831 in Color: Chrome Wheel Nut Style: Bulge Seat Open End
- Product Attributes:
- Estilo del asiento: Base Cónica: 60°
- SAE or Metric:
- Metric
- Métrico
- Grade Type: Regular
- Thread Direction:
- Clockwise (right)
- Rotar En El Sentido De Las Agujas Del Reloj (derecha)
- Thread Pitch: 1.5
- Washers Included:
- No
- Non
- Thread Type:
- Fine
- Fino
- OE Replacement Or Custom Performance:
- Custom Performance
- Rendimiento Personalizado
- Wheel Lock Key Included:
- No
- Non
- Wheel Nut Style: Bulge Seat Open End
- Hex Size: 19 Mm
- Diseño de extremo abierto: Sí
- Color:
- Chrome
- Cromo
- Estilo de la tuerca de la rueda: Base Saliente Extremo Abierto
- Contenidos del paquete: 10 Tuercas De La Rueda
- Seat Style: Conical Seat - 60 Deg
- Open End Design:
- Oui
- Yes
- Material:
- Acero
- Steel
-
Features:
- Direct replacement - these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
- Ensure fit - available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
- Durable construction - designed and manufactured to strict specifications for reliable performance
- Trustworthy quality - backed by a team of product experts in the United States and more than a century of automotive experience
- These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.
Additional Fitment Information:
| Vehicle |
|---|
| 2022 - Chrysler Pacifica |
Showing 1 - 10 of 44 products
Loading...