1963 Plymouth Transmission Parts
Choose a Model for your 1963 Plymouth
Image
Product
Price
- Centerforce(R) Accessories; Throw Out Bearing/Clutch Release Bearing
- Flat Face; 1.625 in. Height; 2.740 in. Major Outside Diameter; 1.255 in. Inside Diameter; Clip Retension
- Each Throw Out Bearing (Release Bearing) sold by Centerforce is the highest quality available. In most application the bearing is a direct Original Equipment (O.E.) replacement.
- Throwout Bearing
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
-
Features:
- Throwout Bearing
- Throw Out Bearing (Release Bearing) sold by Centerforce is the highest quality available. In most application the bearing is a direct Original Equipment (O.E.) replacement. Centerforce recommends changing the pilot bearing/bushing and release bearing during every clutch install.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1963 - Plymouth Belvedere | V | 6981 | 8 Cyl 7.0L | 426 |
- steel flywheel
- 6 Bolt ; 130 Teeth; 10.5 in. Borg/Beck And Diaphragm; Zero Balance
- Steel flywheel Chrysler 318-440/64-99/0 bal./except 360/6 bolt/130T/10.5 Borg/Beck/Diaphragm
- Steel Flywheel
-
Features:
- Dynamically Balanced Within 1/2 oz./in. Of Factory Specifications
- Surface Ground For Optimum Disc Mating Surface
- Strictly Factory Warranty Only
- The flywheel accepts one half of the load of the clutch system. To realize the potential of the clutch system, the flywheel must be flat, parallel to the crankshaft flange, properly surface ground for maximum friction compatibility with the clutch disc, and balanced. Dyno testing proves that flywheel balance is critical to achieving maximum engine service. Every RAM flywheel is dynamically balanced to within ? ounce/inch of the factory specification. RAM aluminum flywheels have a .250 inch thick steel friction insert to handle the heat generated under extreme conditions, while allowing resurfacing without the need to replace the insert. All RAM flywheels are manufactured from SFI certified materials in our South Carolina facility.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1963 - Plymouth Fury | V | 5917 | 8 Cyl 5.9L | Base | 361 |
- U-Cut-To-Fit; Includes Aluminum Fittings w/Ferrule/Instructions; Stainless Steel Housing; Stainless Steel Finish
- Hi-Tech Kickdown Kit; U-Cut-To-Fit; Includes Aluminum Fittings w/Ferrule/Instructions; Stainless Steel Housing; Stainless Steel Finish;
- Hi-Tech Kickdown Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
- Trans Model: Chrysler- Torqueflite A727 (auto) 3 Speed
-
Features:
- U-Cut-To-Fit Design Works In Any Application
- Specially Extruded Liner For Extended Cable Life
- Aluminum Ferrule To Eliminate Fraying
- Made In The U.S.A.
- Lifetime Warranty
- Lokars U-Cut-to-Fit Kickdown Cables are available in either stainless steel braided housing, black stainless steel braided housing or black housing. They are designed with a specially extruded liner for extended life of the cable – not to be confused with ordinary brake hose. Kickdown features aluminum fittings with ferrule to eliminate frayed cable ends. Kickdowns are adaptable for all types of manifolds including tunnel ram, blower manifolds and Weber induction systems. Mount our kickdown with our Stainless Steel Carburetor Bracket and Return Springs (sold separately). Complete instructions included in kit. Polished kickdown cables will include polished aluminum fittings. Black Hi-Tech stainless cables will include black anodized aluminum fittings.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Transmission Manuf. Code | CID |
|---|---|---|---|---|---|
| 1963 - Plymouth Belvedere | V | 6981 | 8 Cyl 7.0L | A727 | 426 |
- U-Cut-To-Fit; Includes Aluminum Fittings w/Ferrule/Instructions; Stainless Steel Housing; Stainless Steel Finish
- Hi-Tech Kickdown Kit; U-Cut-To-Fit; Includes Aluminum Fittings w/Ferrule/Instructions; Stainless Steel Housing; Stainless Steel Finish;
- Hi-Tech Kickdown Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
- Trans Model: Chrysler- Torqueflite A904 (auto) 3 Speed
-
Features:
- U-Cut-To-Fit Design Works In Any Application
- Specially Extruded Liner For Extended Cable Life
- Aluminum Ferrule To Eliminate Fraying
- Made In The U.S.A.
- Lifetime Warranty
- Lokars U-Cut-to-Fit Kickdown Cables are available in either stainless steel braided housing, black stainless steel braided housing or black housing. They are designed with a specially extruded liner for extended life of the cable – not to be confused with ordinary brake hose. Kickdown features aluminum fittings with ferrule to eliminate frayed cable ends. Kickdowns are adaptable for all types of manifolds including tunnel ram, blower manifolds and Weber induction systems. Mount our kickdown with our Stainless Steel Carburetor Bracket and Return Springs (sold separately). Complete instructions included in kit. Polished kickdown cables will include polished aluminum fittings. Black Hi-Tech stainless cables will include black anodized aluminum fittings.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Transmission Manuf. Code | Sub Model | CID |
|---|---|---|---|---|---|---|
| 1963 - Plymouth Valiant | L | 3687 | 6 Cyl 3.7L | A904 (30RH) | 200 | 225 |
- Street Pro: Clutch Kit: 1963-2003 Mopar: 10.5 X 1 X 23 Spline
- Street Pro: Clutch Kit: 1963-2003 Mopar: 10.5 X 1 X 23 Spline
- Product Attributes:
- Pressure Plate Style: Diaphragm
- Application: 1963-03 Mopar
- Alignment Tool Included: Yes
- Disc Material: Organic
- Pilot Bushing Included: Yes
- Horsepower Rating: 400
- Input Shaft Diameter (in.): 1 In.
- Make: Mopar
- Disc Diameter (in.): 10.5 In.
- Input Shaft Quantity: 23
- Number of Discs: Single
- Throwout Bearing Included: Yes
- Flywheel Included: No
-
Features:
- McLeod Racing offers 4 levels of single disc clutches based on power and torque needs. The Street Level, Street Pro, Super Street Pro & the Street Extreme.
- The Street Pro is the perfect choice for an entry level performance clutch for the street. We recommend it for cars up to 400hp (depending on part number) with mild engine mods and street tires. Included is a high clamp load pressure plate, an organic disc for smooth and even engagement with increased holding power over stock. Our kits are complete with Pressure Plate, Disc, throw out bearing (where applicable) pilot bushing (where applicable) and alignment tool. If you are looking for a clutch that's a great step up from your stock set up, the McLeod Street Pro is the clutch for you.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 1963 - Plymouth Fury | V | 6286 | Manual | 8 Cyl 6.3L | Base | 383 |
- Bolt Pak 7/16 x 20. GM, Ford, Mopar Crank Bolts, Set of 6
- Bolt Pak 7/16 x 20. GM, Ford, Mopar Crank Bolts, Set of 6
- Product Attributes:
- Thread Size: 7/16-20
- Material Finish: Black Oxide
- Washer Included: No
- Head Style: 6 Point
- Fastener Grade: Grade 8
- Quantity: Sold In Package Of 6 Bolts.
- Bolt Location: Flywheel To Crankshaft
- Fastener Material: Steel
-
Features:
- All McLeod Racing hardware is quality Grade 8 Hardware that is to made proprietary to McLeod Racings specs. We also are proud to use ARP the world wide leader in performance hardware in some parts numbers.
- Flywheel bolts play a very important role in the performance and safety of race cars and street machines alike. That's why McLeod offers flywheel bolt kits that are far superior to OEM hardware, so you can bolt in your flywheel with confidence. McLeqod steel bolt kits offer increased strength and improved flywheel register.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Region | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 1963 - Plymouth Belvedere | V | 6286 | Manual | United States | 8 Cyl 6.3L | Base | 383 |
- Oil Seal
- with Chrysler A727 Transmission
- National 331227H Oil Seal
- Product Attributes:
- Shaft (Inch): 1.875
- Sealing Material: Silicone
- Width (Inch): 0.375
- Flanged Outside Diameter (Inch): 2.868
- Inside Diameter:
- 1.875
- 47.630
- Flanged Outside Diameter (MM): 72.850
- Helix Type: Clockwise-spiral Lip Design
- Unit of Dimension: Inch
- Housing Bore (Inch): 2.624
- Outside Diameter:
- 2.628
- 66.750
- Outside Diameter (Inch): 2.628
- Shaft (MM): 47.630
- Part Description: Oil Seal
- National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
This Part Fits the Following OEM/Substitute Numbers:
052-3201, 15-09106, 15527598, 18508, 18592, 1942020, 211-2142, 211-6532, 240C15606C, 29399, 331227H, 3515137, 432802C91, 4531225, 46392, 57541R, 8122839, 8124869...VIEW MORE
Additional Fitment Information:
| Vehicle | Transmission | Position | Trans. Speed |
|---|---|---|---|
| 1963 - Plymouth Valiant | Automatic | Front | 3 |
- Oil Seal
- Long Boot with 30 Splines with 1.250 (in) Width with New Process A745 Transmission 3 Speed
- National 7300S Oil Seal
- Product Attributes:
- Shaft (Inch): 1.685
- Sealing Material: Polyacrylate
- Width (Inch): 0.421
- Overall Width with Side Lip (Inch): 1.250
- Redicoat: Yes
- Overall Width with Side Lip (MM): 31.750
- Flanged Outside Diameter (Inch): 2.850
- Flanged Outside Diameter (MM): 72.390
- Inside Diameter:
- 1.685
- 42.800
- Helix Type: Counter-clockwise-spiral Lip Design
- Unit of Dimension: Inch
- Housing Bore (Inch): 2.500
- Outside Diameter:
- 2.506
- 63.650
- Outside Diameter (Inch): 2.506
- Shaft (MM): 42.800
- Part Description: Oil Seal
- National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
This Part Fits the Following OEM/Substitute Numbers:
02400300, 03515383, 04531216, 04531216 AB, 04626590, 04741119, 05016760AA, 1300044002, 16156, 16567, 16727, 2400300, 29348, 3515383, 4531216, 4531216AB, 4626590, 47362...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 1963 - Plymouth Fleet Special |
- Oil Seal
- Long Boot with 30 Splines with 1.250 (in) Width with New Process A745 Transmission
- National 7300S Oil Seal
- Product Attributes:
- Shaft (Inch): 1.685
- Sealing Material: Polyacrylate
- Width (Inch): 0.421
- Overall Width with Side Lip (Inch): 1.250
- Redicoat: Yes
- Overall Width with Side Lip (MM): 31.750
- Flanged Outside Diameter (Inch): 2.850
- Flanged Outside Diameter (MM): 72.390
- Inside Diameter:
- 1.685
- 42.800
- Helix Type: Counter-clockwise-spiral Lip Design
- Unit of Dimension: Inch
- Housing Bore (Inch): 2.500
- Outside Diameter:
- 2.506
- 63.650
- Outside Diameter (Inch): 2.506
- Shaft (MM): 42.800
- Part Description: Oil Seal
- National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Additional Fitment Information:
| Vehicle | Transmission | Trans. Speed |
|---|---|---|
| 1963 - Plymouth Savoy | Manual | 3 |
- Oil Seal
- with Chrysler A727 Transmission 3 Speed
- National 331227H Oil Seal
- Product Attributes:
- Shaft (Inch): 1.875
- Sealing Material: Silicone
- Width (Inch): 0.375
- Flanged Outside Diameter (Inch): 2.868
- Inside Diameter:
- 1.875
- 47.630
- Flanged Outside Diameter (MM): 72.850
- Helix Type: Clockwise-spiral Lip Design
- Unit of Dimension: Inch
- Housing Bore (Inch): 2.624
- Outside Diameter:
- 2.628
- 66.750
- Outside Diameter (Inch): 2.628
- Shaft (MM): 47.630
- Part Description: Oil Seal
- National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1963 - Plymouth Fleet Special | Front |
Showing 1 - 10 of 10 products
Loading...