Image
Product
Price
- Centerforce(R) I and II; Clutch Friction Disc
- 11 in. Dia.; 10 Spline; 1 1/8 in. Input Shaft; Organic Friction
- The Centerforce I and II Discs are made from full high-quality friction full facings. These discs are made for Centerforce I and II pressure plates.
- Clutch Disc
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
- Diameter (in.): 11.000 In.
- Spline Size: 1.03125 In. - 10
-
Features:
- High Quality Friction Material
- Smooth Engagement
- Centerforce brings together high-quality friction materials and patented processes to give you top-of-the-line discs. Centerforce offers discs for the Centerforce I, Centerforce II, Dual Friction, LMC, and DFX series clutches. Each disc is designed to work best with a corresponding Centerforce pressure plate.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1987 - Toyota Land Cruiser | L | 4227 | 6 Cyl 4.2L | Base | - |
- Centerforce(R) Accessories; Clutch Pilot Bearing
- 0.715 in. Height; 1.094 in. Major Outside Diameter; 0.615 in. Inside Diameter
- Each pilot bearing or bushing sold by Centerforce is the highest quality available. In most application the bearing is a direct Original Equipment (O.E.) replacement.
- Pilot Bearing
- Product Attributes:
- Inside Diameter: 0.612 In.
- WARNING CA Proposition 65: Yes
- Outside Diameter: 1.094 In.
- WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
- Overall Length: 0.720 In.
-
Features:
- Pilot Bearing
- Pilot bearing or bushing sold by Centerforce is the highest quality available. In most application the bearing is a direct Original Equipment (O.E.) replacement. Centerforce recommends changing the pilot bearing/bushing and release bearing during every clutch install.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1987 - Toyota Land Cruiser | L | 4227 | 6 Cyl 4.2L | Base | - |
- Centerforce(R) I; Clutch Pressure Plate
- 11 in. Dia.; 479 ft/lbs Torque; Cast Iron Pressure Plate
- The Centerforce(R) I Clutch Pressure Plate has been designed as a high-quality entry-level performance pressure plate for those in need of a superior stock replacement (disc sold separately).
- Centerforce I Clutch Pressure Plate
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
- Diameter (in.): 11.000 In.
-
Features:
- Patented Centrifugal Weight Design [where Applicable]
- High Quality Friction Material
- Light Pedal Effort
- Smooth Engagement
- The Centerforce(R) I, Clutch Pressure Plate has been designed as a high-quality entry-level performance pressure plate for those in need of a superior stock replacement (disc sold separately). Using the Centerforce centrifugal weight system (where applicable). The Centerforce I clutch system is perfect for applications with stock engines or mild power increases from minor bolt-on modifications. The torque figures for Centerforce I Pressure Plates are based and calculated in conjunction with a Centerforce I & II clutch disc.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1987 - Toyota Land Cruiser | L | 4227 | 6 Cyl 4.2L | Base | - |
- Ductile Casting; 215mm; 21T/24.1mm Spline Clamp Load: 1543 lbs.~Clutch Torque: 283 ft./lbs.~Torque At Flywheel: 225ft./lbs.~Torque Capacity At Wheels: 180 ft./lbs.
- Stage 1 Organic Clutch Kit; Ductile Casting; 215mm; 21T/24.1mm Spline;
- Stage 1 Organic Clutch Kit
-
Features:
- Clutch Cover Has Clamp Load 40 Perc. Above Genuine
- Organic Disc Has High Heat Resistant Properties
- Disc Has High Strength Copper Weave Fibers
- Disc Provides Superior Half-Engagement Feeling
- Ideal For Street/Circuit Or Drifting
- SFI Certified
- Drivability Is Similar To Stock Clutch
- Sprung Center Dampers To Reduce Drive Train Shock
- EXEDY Stage 1 Organic Racing Clutches only use premium friction materials that are resistant to slippage and burst. Increased clamp loads give the necessary capacity to handle modified engines. This is the ideal clutch for street and light horsepower track use. Drivability is similar to the stock clutch. Pedal efforts will be slightly higher because of the higher clamp loads. All of our Stage 1 clutch discs have spring center dampers to reduce drivetrain shock and provide smooth clutch engagement.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1987 - Toyota MR2 | L | 1587 | 4 Cyl 1.6L | - |
- Ductile Casting; 215mm; 21T/24.1mm Spline Clamp Load: 1543 lbs.~Clutch Torque: 283 ft./lbs.~Torque At Flywheel: 225ft./lbs.~Torque Capacity At Wheels: 180 ft./lbs.
- Stage 1 Organic Clutch Kit; Ductile Casting; 215mm; 21T/24.1mm Spline;
- Stage 1 Organic Clutch Kit
-
Features:
- Clutch Cover Has Clamp Load 40 Perc. Above Genuine
- Organic Disc Has High Heat Resistant Properties
- Disc Has High Strength Copper Weave Fibers
- Disc Provides Superior Half-Engagement Feeling
- Ideal For Street/Circuit Or Drifting
- SFI Certified
- Drivability Is Similar To Stock Clutch
- Sprung Center Dampers To Reduce Drive Train Shock
- EXEDY Stage 1 Organic Racing Clutches only use premium friction materials that are resistant to slippage and burst. Increased clamp loads give the necessary capacity to handle modified engines. This is the ideal clutch for street and light horsepower track use. Drivability is similar to the stock clutch. Pedal efforts will be slightly higher because of the higher clamp loads. All of our Stage 1 clutch discs have spring center dampers to reduce drivetrain shock and provide smooth clutch engagement.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1987 - Toyota MR2 | L | 1587 | 4 Cyl 1.6L | - |
Additional Fitment Information:
| Vehicle | Block | CC | Engine Designation | Engine | CID |
|---|---|---|---|---|---|
| 1987 - Toyota Camry | L | 1998 | 3SFE | 4 Cyl 2.0L | 122 |
- Oil Seal
- with Aisin A240L Transmission
- National 710110 Oil Seal
- Product Attributes:
- Shaft (Inch): 1.339
- Sealing Material: Polyacrylate
- Width (Inch): 0.354
- Overall Width with Side Lip (Inch): 0.610
- Overall Width with Side Lip (MM): 15.500
- Inside Diameter:
- 1.339
- 34.000
- Helix Type: Bi-directional Lip Design
- Unit of Dimension: Metric
- Housing Bore (Inch): 2.126
- Outside Diameter:
- 2.136
- 54.250
- Outside Diameter (Inch): 2.136
- Shaft (MM): 34.000
- Part Description: Oil Seal
- National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Transmission | Position | Trans. Speed |
|---|---|---|---|
| 1987 - Toyota Corolla | Automatic | Right | 4 |
- Oil Seal
- with Aisin A240E Transmission
- National 710110 Oil Seal
- Product Attributes:
- Shaft (Inch): 1.339
- Sealing Material: Polyacrylate
- Width (Inch): 0.354
- Overall Width with Side Lip (Inch): 0.610
- Overall Width with Side Lip (MM): 15.500
- Inside Diameter:
- 1.339
- 34.000
- Helix Type: Bi-directional Lip Design
- Unit of Dimension: Metric
- Housing Bore (Inch): 2.126
- Outside Diameter:
- 2.136
- 54.250
- Outside Diameter (Inch): 2.136
- Shaft (MM): 34.000
- Part Description: Oil Seal
- National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Transmission | Position | Trans. Speed |
|---|---|---|---|
| 1987 - Toyota MR2 | Automatic | Right | 4 |
- Oil Seal
- with Aisin A132L Transmission
- National 710110 Oil Seal
- Product Attributes:
- Shaft (Inch): 1.339
- Sealing Material: Polyacrylate
- Width (Inch): 0.354
- Overall Width with Side Lip (Inch): 0.610
- Overall Width with Side Lip (MM): 15.500
- Inside Diameter:
- 1.339
- 34.000
- Helix Type: Bi-directional Lip Design
- Unit of Dimension: Metric
- Housing Bore (Inch): 2.126
- Outside Diameter:
- 2.136
- 54.250
- Outside Diameter (Inch): 2.136
- Shaft (MM): 34.000
- Part Description: Oil Seal
- National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Transmission | Position | Trans. Speed |
|---|---|---|---|
| 1987 - Toyota Tercel | Automatic | Right | 3 |
- Oil Seal
- with Aisin A131L Transmission
- National 710110 Oil Seal
- Product Attributes:
- Shaft (Inch): 1.339
- Sealing Material: Polyacrylate
- Width (Inch): 0.354
- Overall Width with Side Lip (Inch): 0.610
- Overall Width with Side Lip (MM): 15.500
- Inside Diameter:
- 1.339
- 34.000
- Helix Type: Bi-directional Lip Design
- Unit of Dimension: Metric
- Housing Bore (Inch): 2.126
- Outside Diameter:
- 2.136
- 54.250
- Outside Diameter (Inch): 2.136
- Shaft (MM): 34.000
- Part Description: Oil Seal
- National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
052-3523, 052-3525, 052-3759, 13439, 13441, 19016636, 19016636B, 19026735, 19026735B, 19026773, 19026773B, 25191106, 67043, 67260, 710110, 90311-34005, 90311-34007, 90311-34012...VIEW MORE
Additional Fitment Information:
| Vehicle | Transmission | Position | Trans. Speed |
|---|---|---|---|
| 1987 - Toyota Corolla | Automatic | Right | 3 |
Showing 1 - 10 of 236 products
Loading...