Image
Product
Price
- ACT Heavy Duty Performance Street Sprung Clutch Kit with Monoloc
- HD-M/Perf Street Sprung
- HD-M/Perf Street Sprung
- Product Attributes:
- Torque Capacity Over OE: 27%
- Torque Capacity (ft/lbs.): 434
- Grade Type: Performance
- Pilot Bearing Included: Yes
- Alignment Tool Included: Yes
- Disc Material: Organic
- Pilot Bushing Included: No
- Input Shaft Diameter: 1
- Prop 65 - Short Label: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Disc Type Sprung Solid: Sprung
- Flywheel Bolts Included: No
- Part Fitment Requirement: Includes Act Monoloc.
- Prop 65 Long Label: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
- Input Spline Quantity: 24
- Pressure Plate Bolts Included: No
- Grease Included: Yes
- Clutch Slave Cylinder Included: No
- Pressure Plate Type: Heavy Duty
- Release Bearing Included: Yes
- Clutch Master Cylinder Included: No
- Product Weight (lbs.): 16.3
- Clutch Disc Diameter:
- 228
- 9
-
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
- SB9-HDSS kit features ACT's most popular Heavy Duty pressure plate and most popular street disc. ACT Heavy Duty pressure plates use exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's Performance street discs are the most popular disc purchased. They feature premium organic materials with high copper content for better heat transfer and steel-backed lining for greater burst strength and durability. These discs feature a reduced marcel for faster shift action to complement ACT pressure plates. Quiet operation with increased strength and reliability. Monoloc is a one-piece, direct replacement or upgrade to the standard, two-piece wedge collar and wire ring featured in pull-type clutches. The spring tension of the segmented retaining ring is carefully calculated and tested for optimal performance. It provides uniform loading on the bearing and pressure plate to assure proper alignment, regardless of driver influence or vehicle modifications. Monoloc's hardened chrome-moly steel construction will provide years of service.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Cylinder Head Type | Engine | Sub Model | Aspiration | CID |
|---|---|---|---|---|---|---|---|---|
| 1992 - Subaru Legacy | H | 2212 | Manual | SOHC | 4 Cyl 2.2L | Sport | Turbocharged | - |
- ACT Clutch Monoloc Collar
- For use with crimp type center hub assemblies.
- Monoloc Collar
- Monoloc Collar
- Product Attributes:
- Sealed: No
- Bearing Shape: Round
- Self Aligning: Yes
- Prop 65 - Short Label: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Product Weight (lbs.): 0.1
- Weight: 0.1
- Prop 65 Long Label: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
-
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
- 884006P is a one-piece, direct replacement or upgrade to the standard, two-piece wedge collar and wire ring featured in pull-type clutches. The spring tension of the segmented retaining ring is carefully calculated and tested for optimal performance. It provides uniform loading on the bearing and pressure plate to assure proper alignment, regardless of driver influence or vehicle modifications. Monoloc's hardened chrome-moly steel construction will provide years of service.
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 1992 - Subaru Legacy | H | 2212 | United States | 4 Cyl 2.2L | Sport | - |
- ACT Clutch Monoloc Collar
- For use with crimp type center hub assemblies.
- Monoloc Collar
- Monoloc Collar
- Product Attributes:
- Sealed: No
- Bearing Shape: Round
- Self Aligning: Yes
- Prop 65 - Short Label: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Product Weight (lbs.): 0.1
- Weight: 0.1
- Prop 65 Long Label: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
-
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
- 884006P is a one-piece, direct replacement or upgrade to the standard, two-piece wedge collar and wire ring featured in pull-type clutches. The spring tension of the segmented retaining ring is carefully calculated and tested for optimal performance. It provides uniform loading on the bearing and pressure plate to assure proper alignment, regardless of driver influence or vehicle modifications. Monoloc's hardened chrome-moly steel construction will provide years of service.
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 1992 - Subaru Legacy | H | 2212 | United States | 4 Cyl 2.2L | Sport | - |
- ACT Heavy Duty Performance Street Sprung Clutch Kit with Monoloc
- HD-M/Perf Street Sprung
- HD-M/Perf Street Sprung
- Product Attributes:
- Torque Capacity Over OE: 27%
- Torque Capacity (ft/lbs.): 434
- Grade Type: Performance
- Pilot Bearing Included: Yes
- Alignment Tool Included: Yes
- Disc Material: Organic
- Pilot Bushing Included: No
- Input Shaft Diameter: 1
- Prop 65 - Short Label: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Disc Type Sprung Solid: Sprung
- Flywheel Bolts Included: No
- Part Fitment Requirement:
- Includes Act Monoloc.
- Includes Monoloc.
- Prop 65 Long Label: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
- Input Spline Quantity: 24
- Pressure Plate Bolts Included: No
- Grease Included: Yes
- Clutch Slave Cylinder Included: No
- Pressure Plate Type: Heavy Duty
- Release Bearing Included: Yes
- Clutch Master Cylinder Included: No
- Product Weight (lbs.): 16.3
- Clutch Disc Diameter:
- 228
- 9
-
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
- SB9-HDSS kit features ACT's most popular Heavy Duty pressure plate and most popular street disc. ACT Heavy Duty pressure plates use exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's Performance street discs are the most popular disc purchased. They feature premium organic materials with high copper content for better heat transfer and steel-backed lining for greater burst strength and durability. These discs feature a reduced marcel for faster shift action to complement ACT pressure plates. Quiet operation with increased strength and reliability. Monoloc is a one-piece, direct replacement or upgrade to the standard, two-piece wedge collar and wire ring featured in pull-type clutches. The spring tension of the segmented retaining ring is carefully calculated and tested for optimal performance. It provides uniform loading on the bearing and pressure plate to assure proper alignment, regardless of driver influence or vehicle modifications. Monoloc's hardened chrome-moly steel construction will provide years of service.
This Part Fits the Following OEM/Substitute Numbers:
15029-2100, 15802HD, 762641, DF012124, FX100 15016-HD00, SU002
Additional Fitment Information:
| Vehicle | Block | CC | Cylinder Head Type | Region | Engine | Sub Model | Aspiration | CID |
|---|---|---|---|---|---|---|---|---|
| 1992 - Subaru Legacy | H | 2212 | SOHC | United States | 4 Cyl 2.2L | Sport | Turbocharged | - |
- Ball Bearing
- National 207 Ball Bearing
- Product Attributes:
- Inner Race Radius (Inch): 0.040
- Width (Inch): 0.669
- Outer Race Outside Diameter (Inch): 2.835
- Outer Race Outside Diameter (MM): 72.000
- Inner Race Radius (MM): 1.020
- Inner Race Bore (Inch): 1.378
- Inner Race Width (MM): 17.000
- Inner Race Width (Inch): 0.669
- Outer Race Width (Inch): 0.669
- Outer Race Width (MM): 17.000
- Bore (Inch): 1.378
- Inner Race Bore (MM): 35.000
- Outer Race Radius (MM): 1.020
- Outside Diameter (Inch): 2.835
- Outer Race Radius (Inch): 0.040
- Part Description: Ball Bearing
- Designed to meet or exceed OE quality, premium-quality bearings from National® are manufactured to exacting standards to deliver lasting performance and extended bearing life.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0009802115, 0009811625, 0019814125, 0023416207, 0029813025, 0039818725, 0049813125, 00625027-40, 01T-4812, 01T4818, 02466224, 03154, 040007, 040038, 04103TS, 04897981AA, 04897981AB, 051-3859...VIEW MORE
Additional Fitment Information:
| Vehicle | Transmission | Position | Trans. Speed | Transmission Manuf. Code |
|---|---|---|---|---|
| 1992 - Subaru Justy | Manual | Right | 5 | TM64F |
- Transmission Mount
- OEM Replacement
- Product Attributes:
- Per Vehicle Quantity: 1
- Mount Material: Steel
- Mount Type: Oem Replacement
- Mounting Position: N/a
- Grade Type: Regular
- Mounting Hardware Included: No
- Bushing Color: Black
- Stud Quantity: 2
- Mounting Hole Quantity: 4
- Meets or Exceeds Original Equipment Manu: Yes
- Mounting Bracket Included: Yes
- Heat Shield Included: No
- Bracket Material: Steel
- Bracket Color: Black
- Bushing Material: Rubber
This Part Fits the Following OEM/Substitute Numbers:
41021AC240, 41022AC180, 41022AG160, 6201836, 626727, 9563, A6727, B9563, EM-5515
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Drive Type | CID |
|---|---|---|---|---|---|
| 1992 - Subaru Legacy | H | 2212 | 4 Cyl 2.2L | AWD | - |
- Transmission Mount
- OEM Replacement
- Product Attributes:
- Per Vehicle Quantity: 1
- Mount Material: Steel
- Mount Type: Oem Replacement
- Mounting Position: N/a
- Grade Type: Regular
- Mounting Hardware Included: No
- Bushing Color: Black
- Stud Quantity: 2
- Mounting Hole Quantity: 4
- Meets or Exceeds Original Equipment Manu: Yes
- Mounting Bracket Included: Yes
- Heat Shield Included: No
- Bracket Material: Steel
- Bracket Color: Black
- Bushing Material: Rubber
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1992 - Subaru Legacy | H | 2212 | 4 Cyl 2.2L | - |
- Ball Bearing
- with Subaru TS40 Transmission
- National 207 Ball Bearing
- Product Attributes:
- Inner Race Radius (Inch): 0.040
- Width (Inch): 0.669
- Outer Race Outside Diameter (Inch): 2.835
- Outer Race Outside Diameter (MM): 72.000
- Inner Race Radius (MM): 1.020
- Inner Race Bore (Inch): 1.378
- Inner Race Width (MM): 17.000
- Inner Race Width (Inch): 0.669
- Outer Race Width (Inch): 0.669
- Outer Race Width (MM): 17.000
- Bore (Inch): 1.378
- Inner Race Bore (MM): 35.000
- Outer Race Radius (MM): 1.020
- Outside Diameter (Inch): 2.835
- Outer Race Radius (Inch): 0.040
- Part Description: Ball Bearing
- Designed to meet or exceed OE quality, premium-quality bearings from National® are manufactured to exacting standards to deliver lasting performance and extended bearing life.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Transmission | Position | Trans. Speed |
|---|---|---|---|
| 1992 - Subaru Justy | Automatic CVT | Right | N/R |
- Ball Bearing
- with Subaru TB40 Transmission
- National 207 Ball Bearing
- Product Attributes:
- Inner Race Radius (Inch): 0.040
- Width (Inch): 0.669
- Outer Race Outside Diameter (Inch): 2.835
- Outer Race Outside Diameter (MM): 72.000
- Inner Race Radius (MM): 1.020
- Inner Race Bore (Inch): 1.378
- Inner Race Width (MM): 17.000
- Inner Race Width (Inch): 0.669
- Outer Race Width (Inch): 0.669
- Outer Race Width (MM): 17.000
- Bore (Inch): 1.378
- Inner Race Bore (MM): 35.000
- Outer Race Radius (MM): 1.020
- Outside Diameter (Inch): 2.835
- Outer Race Radius (Inch): 0.040
- Part Description: Ball Bearing
- Designed to meet or exceed OE quality, premium-quality bearings from National® are manufactured to exacting standards to deliver lasting performance and extended bearing life.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Transmission | Position | Trans. Speed |
|---|---|---|---|
| 1992 - Subaru Justy | Automatic CVT | Right | N/R |
- Oil Seal
- with Subaru TZ102 Transmission
- National 710265 Oil Seal
- Product Attributes:
- Inside Diameter:
- 2.008
- 51.000
- Shaft (Inch): 2.008
- Sealing Material: Polyacrylate
- Width (Inch): 0.256
- Unit of Dimension: Metric
- Housing Bore (Inch): 2.598
- Outside Diameter (Inch): 2.606
- Shaft (MM): 51.000
- Part Description: Oil Seal
- Inside Diameter:
- National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
This Part Fits the Following OEM/Substitute Numbers:
20001, 710265, 8067-52010, 8067-52020, 90311-51008, 90311-51010, B29606, NO-32
Additional Fitment Information:
| Vehicle | Transmission | Position | Trans. Speed |
|---|---|---|---|
| 1992 - Subaru SVX | Automatic | Front | 4 |
Showing 1 - 10 of 55 products
Loading...