2006 Ford Transmission Parts


Showing 1 - 10 of 220 products
Image
SKU
Product
Rating
Price

Ram
  • pilot bushing/bearing
  • 0.672 in. ID; 1.379 in. OD; 0.725 in. Length
  • Pilot bushing/bearing Ford
  • Product Attributes:
    • Inside Diameter: 0.672 In.
  • Features:
    • Pilot Bushing/Bearing
    • Strictly Factory Warranty Only
  • Premium replacement pilot bearings and bushings complete your clutch install for a long, trouble free life of operation.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
2006 - Ford F-350 Super Duty V - 8 Cyl 5.4L XLT 330

Mcleod
  • Stainless Steel Braided Line: Double -4 AN: Female: 36 in.: w/Bleeder
  • Stainless Steel Braided Line: Double -4 AN: Female: 36 in.: Ford Mustang 2005-23: w/Bleeder
  • Product Attributes:
    • Hose End 1: -4 An Female Threads
    • Quantity: Sold Individually.
    • Application: 2005-2023 Mustang
    • Hose End 2: -4 An Female Threads
    • Hose Material: Stainless Steel Braided Hose, Teflon Liner.
    • Hose Type: A.n.-4 S.s. Braided Line
    • Make: Ford
    • Port 2: Female Wireclip
    • Hose End 1 Attachment: Male Wire-clip
    • Port 1: Female Wireclip
    • Hose Length (in.): 36
    • Fittings Included: Wire Clip (qty Of 2)
    • Hose Length(in): 36in.
    • Hose End 2 Attachment: Male Wire-clip
  • Features:
    • • Braided Stainless Steel. • Assortment of Lengths. • Both -4 AN and GM Quick Disconnect Fittings. • Pre-Assembled, Factory-Crimped to Eliminate Leakage.
  • Mcleod Stainless Steel Braided Clutch Line Assemblies Are Constructed From High-Quality Stainless Steel Braided Hose. They Also Feature Pre-Assembled Ends That Are Factory-Crimped To Eliminate Leakage. They Come Available In Different Lengths And End Configurations.

Additional Fitment Information:
Vehicle Block CC Transmission Engine Sub Model CID
2006 - Ford Mustang V - Manual 8 Cyl 4.6L GT 281

Mcleod
  • Fitting:Double Male:Straight:AN-4 To Wire-Clip:Each
  • Fitting:Double Male:Straight:AN-4 To Wire-Clip:Each
  • Product Attributes:
    • Fitting Side B: Wire-clip
    • Fitting Side A: An-4 Male
    • Material: Steel
  • Features:
    • Mcleod Racing offers an asortment of connections and fittings to get your hydraulic linkage done right the first time.
  • McLeod Racing offers a variety of adapter fittings to ease in transmission installation. These adapters allow the use of factory disconnect fittings when performing a transmission swap.

Additional Fitment Information:
Vehicle Block CC Transmission Engine Sub Model CID
2006 - Ford F-350 V - Manual 8 Cyl 5.4L XL 330

Mishimoto
  • Aluminum Transmission Pan, fits Ford E4OD/4R100/5R110 Transmissions
  • Aluminum Transmission Pan, fits Ford E4OD/4R100/5R110 Transmissions
  • Product Attributes:
    • SellingPoint04: Bolt Retainers Hold Fasteners In Place For Easy Installation
    • SellingPoint05: Internal Baffles Reduce Sloshing And Enhance Heat Dissipation For Smoother, More Efficient Transmission Operation
    • SellingPoint06: 1/8-inch Npt Port Makes Adding A Temp Sensor Fast And Easy
    • TechSpec Overall Length (in): N/a
    • SellingPoint07: Precision-machined Sealing Surface Helps Prevent Leaks
    • SellingPoint01: Direct Fit For Ford E4od/4r100/5r110 Transmissions
    • SellingPoint02: Durable Cast-aluminum Construction For Long-lasting Performance
    • SellingPoint03: Increases Fluid Capacity By 6.6 Quarts Over The Stock Transmission Pan For More Cooling Capacity
    • TechSpec Chassis Codes: N/a
    • SellingPoint08: Magnetic Drain Plug Makes Servicing Your Transmission A Breeze
    • SellingPoint09: Gunmetal Gray Powder Coat Finish Adds Style And Function To Your Truck’s Undercarriage
    • TechSpec Outlet: N/a
    • TechSpec Core Height (in): N/a
    • TechSpec Core Thickness (in): N/a
    • SellingPoint10:
      • Mishimoto Lifetime Warranty
      • Patent Number Pat001135
    • TechSpec Note: N/a
    • TechSpec Installation Notes: Drain Plug Torque Spec: 15 Lb-ft----a Pan Gasket Is Not Included With This Product. Mishimoto Recommends Replacing It With Oem Part #f6tz-7a191-a To Ensure Leak-free Operation.
    • SellingPoint15: N/a
    • Install Difficulty: 1
    • SellingPoint11: Mishimoto Lifetime Warranty
    • SellingPoint12: N/a
    • TechSpec Engine Codes: N/a
    • SellingPoint13: N/a
    • SellingPoint14: N/a
    • TechSpec Core Length (in): N/a
    • TechSpec Overall Height (in): N/a
    • TechSpec Fluid Capacity (qts): 6.64 (pan)/ 13.64 (total E4od/4r100)/ 12 (total 5r110)
    • TechSpec Caution: N/a
    • TechSpec Applications: 1989-2010 Ford 7.3l, 6.0l, 6.4l Powerstroke E4od 4r100 5r110
    • TechSpec Includes: (1) Cast Aluminum Transmission Pan--(1) Magnetic Drain Plug--(20) Silicone Bolt Retainers--(20) Socket Head Cap Screws W/ Washers--(1) 1/8-in Npt Plug--mishimoto Lifetime Warranty
    • TechSpec Rows: N/a
    • TechSpec Inlet: N/a
    • TechSpec Core Construction: N/a
    • TechSpec Overall Width (in): N/a
  • This Mishimoto Aluminum Transmission Pan is a direct-fit, high-performance upgrade for your 1989-2010 Ford 7.3L, 6.0L and 6.4L Powerstroke. Cast from high-quality aluminum and powder coated Gunmetal Gray, our transmission pan is a robust and long-lasting upgrade for your vehicle's transmission. With a sleek design and bottom ribs, this pan not only adds to the overall aesthetic of your truck but also provides improved cooling performance.----This transmission pan features internal baffles that reduce sloshing and enhance heat dissipation, resulting in smoother transmission performance. Our casting features a precision-machined sealing surface, ready to accept either a factory-style gasket or sealant of your choice (not included). Additionally, the Mishimoto 1989-2010 Ford Powerstroke Aluminum Transmission Pan adds an extra 6.6 quarts of ATF to help maintain optimal transmission operation.----Fed up with the frustration of trying to hold up a transmission pan with one hand while threading the fasteners in with the other? Mishimoto has you covered with pre-installed bolt retainers that hold the fasteners in the pan, allowing you to easily thread the bolts without dropping them on the ground, your head, or worse, that pan of nasty transmission fluid you just drained. Additionally, our pan comes equipped with a magnetic drain plug for easy draining and a 1/8-inch NPT port and plug for temperature sensors to make servicing your transmission and monitoring temperatures a breeze.----This direct-fit upgrade offers affordable durability and helps maintain smooth transmission operation, ensuring a long life for your transmission. Like all Mishimoto products, this transmission pan is backed by the Mishimoto Lifetime Warranty.

This Part Fits the Following OEM/Substitute Numbers:
14208, 301-900-3104, 3280510x0, 8C3Z7A194B, F81Z7A194BA, MH4R100, MHF5R110

Additional Fitment Information:
Vehicle Block CC Engine CID
2006 - Ford E-350 Super Duty V - 8 Cyl 6.0L 363

Ram
  • steel flywheel
  • 0 Balance; 164 Teeth; 6 Bolt; 10.5 And 11 Ford Diaphragm; 11 long style
  • Steel flywheel Ford 4.6L/96-07/0 bal./164T/6 bolt/10.5/11 Ford Diaphragm/11 long style
  • Steel Flywheel
  • Features:
    • Dynamically Balanced Within 1/2 oz./in. Of Factory Specifications
    • Surface Ground For Optimum Disc Mating Surface
    • Strictly Factory Warranty Only
  • The flywheel accepts one half of the load of the clutch system. To realize the potential of the clutch system, the flywheel must be flat, parallel to the crankshaft flange, properly surface ground for maximum friction compatibility with the clutch disc, and balanced. Dyno testing proves that flywheel balance is critical to achieving maximum engine service. Every RAM flywheel is dynamically balanced to within ? ounce/inch of the factory specification. RAM aluminum flywheels have a .250 inch thick steel friction insert to handle the heat generated under extreme conditions, while allowing resurfacing without the need to replace the insert. All RAM flywheels are manufactured from SFI certified materials in our South Carolina facility.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
2006 - Ford Mustang V - 8 Cyl 4.6L GT 281

Wix
  • WIX Spin-On Lube Filter
  • Original Equipment Part Number 436936 Also Available In Master Pack Version
  • Product Attributes:
    • California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Inner Diameter Top: Closed
    • Outer Diameter Top: 2.921
    • Burst Pressure: 275
    • Duty Type: Ld
    • Micron: 21.00
    • BetaRatio: 2/20=6/20
    • Bypass Relief Valve Setting: 8-11
    • Flow Rate: 7-9 Gpm
    • Media Material: Enhanced Cellulose
    • Class: A
  • WIX Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months. This filter traps up to 50% more dirt and contaminants than Protec with the best combination of capacity & efficiency for severe conditions. When applicable, WIX flexible silicone anti-drainback valve protects against dry engine starts past the traditional filter change interval. Laboratory Test Performance per ISO 454812 18 grams dirt (WIX 51515), 99% efficient at 23 microns (Based on WIX 51515, WIX 51356, WIX 57060)

This Part Fits the Following OEM/Substitute Numbers:
0 451 103 262, 0 986 452 003, 0 986 452 019, 0 986 452 027, 0 986 452 035, 0 986 452 038, 0 986 452 044, 0 986 AF0 055, 0 986 AF0 138, 0 986 AF0 207, 0 986 AF1 046, 0 986 AF1 073, 0 986 AF1 078, 0 986 AF1 129, 00013504996, 0060290915004, 0122-0645, 019005200039...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Region Engine CID
2006 - Ford Mondeo L 1999 Mexico 4 Cyl 2.0L 122

Wix
  • WIX Spin-On Lube Filter
  • Original Equipment Part Number 436936 Master Pack Version
  • Product Attributes:
    • California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Inner Diameter Top: Closed
    • Outer Diameter Top: 2.921
    • Burst Pressure: 275
    • Duty Type: Ld
    • Micron: 21.00
    • BetaRatio: 2/20=6/20
    • Bypass Relief Valve Setting: 8-11
    • Flow Rate: 7-9 Gpm
    • Media Material: Enhanced Cellulose
    • Class: A
  • WIX Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months. This filter traps up to 50% more dirt and contaminants than Protec with the best combination of capacity & efficiency for severe conditions. When applicable, WIX flexible silicone anti-drainback valve protects against dry engine starts past the traditional filter change interval. Laboratory Test Performance per ISO 454812 18 grams dirt (WIX 51515), 99% efficient at 23 microns (Based on WIX 51515, WIX 51356, WIX 57060)
  • This item must be purchased in quantities of 12

This Part Fits the Following OEM/Substitute Numbers:
1348MP, 21348MP, 332145564, 3612413, 51348MP, 61348BP, 618-51348MP, 70001403, 7020215, 85348MP, B241MP, OP 618, PH2835B, PH3614FP, R85348MP, V241BP

Additional Fitment Information:
Vehicle Block CC Region Engine CID
2006 - Ford Mondeo L 1999 Mexico 4 Cyl 2.0L 122

Wix
  • WIX Automatic Transmission Filter Kit
  • Product Attributes:
    • California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Inner Diameter Top: Closed
    • Duty Type: Ld
    • Class: C
  • Automatic transmission filters feature design and construction that ensure no unfiltered fluid can bypass the application specific filtration media. Lock seamed and sealed assemblies and application specific sealing components ensure complete filtration. WIX transmission filter kits include sealing gaskets specifially designed for use with today's sophisticated transmission fluids

This Part Fits the Following OEM/Substitute Numbers:
20005, 3C3P7G186AF, 3C3Z7A098AA, 5577, 58624, 61658624, 7577, 806697, 88624, 96058, B218, F225, F391L, FK360, FT1226, FT144, FT226, P1277...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Region Engine Transmission Manuf. Code CID
2006 - Ford F-250 Super Duty V - Canada 10 Cyl 6.8L 5R110W 415

Wix
  • WIX Automatic Transmission Filter Kit
  • Product Attributes:
    • California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Inner Diameter Top: Closed
    • Duty Type: Ld
    • Class: A
  • Automatic transmission filters feature design and construction that ensure no unfiltered fluid can bypass the application specific filtration media. Lock seamed and sealed assemblies and application specific sealing components ensure complete filtration. WIX transmission filter kits include sealing gaskets specifially designed for use with today's sophisticated transmission fluids

This Part Fits the Following OEM/Substitute Numbers:
18029, 18098, 25313823, 256, 5003200227, 5256, 58955, 61658955, 7256, 745148, 84139, 85955, 88955, AT76, B144, B247, F152, F152A...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Region Engine Transmission Manuf. Code CID
2006 - Ford E-150 V - Canada 8 Cyl 4.6L 4R75W 281

BD Diesel
  • TapShifter / Exhaust Brake - Ford 2003-2007 6.0L F250/F350 PowerStroke
  • TapShifter / Exhaust Brake - Ford 2003-2007 6.0L F250/F350 PowerStroke - Button Gear Selection
  • Tap Shifter Kit
  • Product Attributes:
    • Category: Shift Controls
    • Engine: 6.0l Powerstroke 03-07
    • Suggested Product: 1057934
    • Make: Ford
    • Prop 65 (C, R or CR): Cr
  • Features:
    • Delivers up to 70psi exhaust backpressure
    • Outstanding for towing, racing and street use
    • For towing, gear down during hill descents and lock out overdrive for hill climbing and curvy roads
    • For street use, limit the range of gears to reduce gear hunting and keeping RPM high for quicker response
    • For racing and dyno, allows manual control of transmission gears and on demand control of torque converter lockup
    • Works great with stock applications
    • New Ford OE 6.7L style shift lever with +/- selector switch
    • Mini gear selection display
    • Premade wiring harnesses
    • Combination Exhaust Brake & Tapshifter
    • Access all 5 gears with a tap of your finger
    • Full control over transmission shifting
    • Utilizes factory variable geometry turbocharger as an exhaust brake for added retarding force
  • Get the total control you always dreamed of with a BD TapShifter. Kit includes a factory looking shift lever that gives you gear control at your fingertips. Great for passing, pulling, hill climbing or whenever you need to change gears quickly. Limit transmission gear hunting and access all five gears; limit upshifts and better control downshifts. Straightforward install and operation. Built in electronic exhaust brake control delivers up to 70psi backpressure utilizing factory variable geometry turbocharger as an exhaust brake for added retarding force.

Additional Fitment Information:
Vehicle Block CC Engine CID
2006 - Ford F-350 Super Duty V - 8 Cyl 6.0L 363
Showing 1 - 10 of 220 products

Loading...