1987 Catalytic Converter Parts


Showing 1 - 10 of 514 products
Image
SKU
Product
Rating
Price

MagnaFlow Performance Exhaust
  • Standard Grade Universal Catalytic Converter - 2.25in.
  • Cutting and Welding Required
  • Magnaflow Standard Grade Universal Catalytic Converter - 2.25in.
  • Universal Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
  • Product Attributes:
    • Inlet Orientation: Straight
    • Air Tube Count: 0
    • Tube Material: Stainless Steel
    • Outlet Gasket Included: No
    • Outlet Mounting Hardware Included: No
    • Body Width: 5.5
    • Body Height: 3.75
    • Inlet Mounting Hardware Included: No
    • Body Material: Stainless Steel
    • Clamps Included: No
    • Outlet Quantity: 1
    • Air Tube Adaptable: No
    • California Air Resources Board (CARB) Certified: No
    • Inlet Gasket Included: No
    • Heat Shield Attached: Yes
    • Hangers Included: No
    • CARB Executive Order Number: Not Applicable
    • Body Type: Clam-shell
    • Heat Shield Material: Aluminized Steel
    • Inlet Inside Diameter: 2.25
    • Substrate Material: Ceramic
    • Outlet Orientation: Straight
    • Inlet Quantity: 1
    • Outlet Inside Diameter: 2.25
    • Sensor Port Count: 0
  • Features:
    • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
    • Compact, lightweight construction enables installation in confined areas, welding is required
    • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
    • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
    • Durable 308 stainless steel MIG welds
  • MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94005 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:
Vehicle Block CC Engine CID
1987 - Oldsmobile 98 V 3800 6 Cyl 3.8L 231

MagnaFlow Performance Exhaust
  • Standard Grade Universal Catalytic Converter - 2.25in.
  • with Single Exhaust Cutting and Welding Required
  • Magnaflow Standard Grade Universal Catalytic Converter - 2.25in.
  • Universal Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
  • Product Attributes:
    • Inlet Orientation: Straight
    • Air Tube Count: 0
    • Tube Material: Stainless Steel
    • Outlet Gasket Included: No
    • Outlet Mounting Hardware Included: No
    • Body Width: 5.5
    • Body Height: 3.75
    • Inlet Mounting Hardware Included: No
    • Body Material: Stainless Steel
    • Clamps Included: No
    • Outlet Quantity: 1
    • Air Tube Adaptable: No
    • California Air Resources Board (CARB) Certified: No
    • Inlet Gasket Included: No
    • Heat Shield Attached: Yes
    • Hangers Included: No
    • CARB Executive Order Number: Not Applicable
    • Body Type: Clam-shell
    • Heat Shield Material: Aluminized Steel
    • Inlet Inside Diameter: 2.25
    • Substrate Material: Ceramic
    • Outlet Orientation: Straight
    • Inlet Quantity: 1
    • Outlet Inside Diameter: 2.25
    • Sensor Port Count: 0
  • Features:
    • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
    • Compact, lightweight construction enables installation in confined areas, welding is required
    • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
    • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
    • Durable 308 stainless steel MIG welds
  • MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94005 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1987 - Lincoln Continental V - Rear Right 8 Cyl 5.0L 302

MagnaFlow Performance Exhaust
  • Standard Grade Universal Catalytic Converter - 3.00in.
  • Cutting and Welding Required
  • Magnaflow Standard Grade Universal Catalytic Converter - 3.00in.
  • Universal Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
  • Product Attributes:
    • Inlet Orientation: Straight
    • Air Tube Count: 0
    • Tube Material: Stainless Steel
    • Outlet Gasket Included: No
    • Outlet Mounting Hardware Included: No
    • Body Width: 5.5
    • Body Height: 3.75
    • Inlet Mounting Hardware Included: No
    • Body Material: Stainless Steel
    • Clamps Included: No
    • Outlet Quantity: 1
    • Air Tube Adaptable: No
    • California Air Resources Board (CARB) Certified: No
    • Inlet Gasket Included: No
    • Heat Shield Attached: Yes
    • Hangers Included: No
    • CARB Executive Order Number: Not Applicable
    • Body Type: Clam-shell
    • Heat Shield Material: Aluminized Steel
    • Inlet Inside Diameter: 3
    • Substrate Material: Ceramic
    • Outlet Orientation: Straight
    • Inlet Quantity: 1
    • Outlet Inside Diameter: 3
    • Sensor Port Count: 0
  • Features:
    • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
    • Compact, lightweight construction enables installation in confined areas, welding is required
    • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
    • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
    • Durable 308 stainless steel MIG welds
  • MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94009 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:
Vehicle Block CC Engine CID
1987 - GMC G1500 V - 8 Cyl 5.7L 350

MagnaFlow Performance Exhaust
  • Standard Grade Universal Catalytic Converter - 3.00in.
  • Under 15000 (lb) Gross Vehicle Weight (GVW) Cutting and Welding Required
  • Magnaflow Standard Grade Universal Catalytic Converter - 3.00in.
  • Universal Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
  • Product Attributes:
    • Inlet Orientation: Straight
    • Air Tube Count: 0
    • Tube Material: Stainless Steel
    • Outlet Gasket Included: No
    • Outlet Mounting Hardware Included: No
    • Body Width: 5.5
    • Body Height: 3.75
    • Inlet Mounting Hardware Included: No
    • Body Material: Stainless Steel
    • Clamps Included: No
    • Outlet Quantity: 1
    • Air Tube Adaptable: No
    • California Air Resources Board (CARB) Certified: No
    • Inlet Gasket Included: No
    • Heat Shield Attached: Yes
    • Hangers Included: No
    • CARB Executive Order Number: Not Applicable
    • Body Type: Clam-shell
    • Heat Shield Material: Aluminized Steel
    • Inlet Inside Diameter: 3
    • Substrate Material: Ceramic
    • Outlet Orientation: Straight
    • Inlet Quantity: 1
    • Outlet Inside Diameter: 3
    • Sensor Port Count: 0
  • Features:
    • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
    • Compact, lightweight construction enables installation in confined areas, welding is required
    • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
    • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
    • Durable 308 stainless steel MIG welds
  • MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94009 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1987 - Chevrolet V20 V - Front 8 Cyl 5.7L 350

MagnaFlow Performance Exhaust
  • Standard Grade Universal Catalytic Converter - 3.00in.
  • Under 8500 (lb) Gross Vehicle Weight (GVW) Cutting and Welding Required
  • Magnaflow Standard Grade Universal Catalytic Converter - 3.00in.
  • Universal Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
  • Product Attributes:
    • Inlet Orientation: Straight
    • Air Tube Count: 0
    • Tube Material: Stainless Steel
    • Outlet Gasket Included: No
    • Outlet Mounting Hardware Included: No
    • Body Width: 5.5
    • Body Height: 3.75
    • Inlet Mounting Hardware Included: No
    • Body Material: Stainless Steel
    • Clamps Included: No
    • Outlet Quantity: 1
    • Air Tube Adaptable: No
    • California Air Resources Board (CARB) Certified: No
    • Inlet Gasket Included: No
    • Heat Shield Attached: Yes
    • Hangers Included: No
    • CARB Executive Order Number: Not Applicable
    • Body Type: Clam-shell
    • Heat Shield Material: Aluminized Steel
    • Inlet Inside Diameter: 3
    • Substrate Material: Ceramic
    • Outlet Orientation: Straight
    • Inlet Quantity: 1
    • Outlet Inside Diameter: 3
    • Sensor Port Count: 0
  • Features:
    • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
    • Compact, lightweight construction enables installation in confined areas, welding is required
    • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
    • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
    • Durable 308 stainless steel MIG welds
  • MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94009 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1987 - GMC G3500 V - Front 8 Cyl 5.7L 350

MagnaFlow Performance Exhaust
  • Standard Grade Universal Catalytic Converter - 2.25in.
  • Cutting and Welding Required
  • Magnaflow Standard Grade Universal Catalytic Converter - 2.25in.
  • Universal Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
  • Product Attributes:
    • Inlet Orientation: Straight
    • Air Tube Count: 0
    • Tube Material: Stainless Steel
    • Outlet Gasket Included: No
    • Outlet Mounting Hardware Included: No
    • Body Width: 5.5
    • Body Height: 3.75
    • Inlet Mounting Hardware Included: No
    • Body Material: Stainless Steel
    • Clamps Included: No
    • Outlet Quantity: 1
    • Air Tube Adaptable: No
    • California Air Resources Board (CARB) Certified: No
    • Inlet Gasket Included: No
    • Heat Shield Attached: Yes
    • Hangers Included: No
    • CARB Executive Order Number: Not Applicable
    • Body Type: Clam-shell
    • Heat Shield Material: Aluminized Steel
    • Inlet Inside Diameter: 2.25
    • Substrate Material: Ceramic
    • Outlet Orientation: Straight
    • Inlet Quantity: 1
    • Outlet Inside Diameter: 2.25
    • Sensor Port Count: 0
  • Features:
    • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
    • Compact, lightweight construction enables installation in confined areas, welding is required
    • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
    • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
    • Durable 308 stainless steel MIG welds
  • MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94005 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1987 - Dodge B250 L 3687 Rear 6 Cyl 3.7L 225

MagnaFlow Performance Exhaust
  • Standard Grade Universal Catalytic Converter - 3.00in.
  • Cutting and Welding Required
  • Magnaflow Standard Grade Universal Catalytic Converter - 3.00in.
  • Universal Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
  • Product Attributes:
    • Inlet Orientation: Straight
    • Air Tube Count: 0
    • Tube Material: Stainless Steel
    • Outlet Gasket Included: No
    • Outlet Mounting Hardware Included: No
    • Body Width: 5.5
    • Body Height: 3.75
    • Inlet Mounting Hardware Included: No
    • Body Material: Stainless Steel
    • Clamps Included: No
    • Outlet Quantity: 1
    • Air Tube Adaptable: No
    • California Air Resources Board (CARB) Certified: No
    • Inlet Gasket Included: No
    • Heat Shield Attached: Yes
    • Hangers Included: No
    • CARB Executive Order Number: Not Applicable
    • Body Type: Clam-shell
    • Heat Shield Material: Aluminized Steel
    • Inlet Inside Diameter: 3
    • Substrate Material: Ceramic
    • Outlet Orientation: Straight
    • Inlet Quantity: 1
    • Outlet Inside Diameter: 3
    • Sensor Port Count: 0
  • Features:
    • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
    • Compact, lightweight construction enables installation in confined areas, welding is required
    • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
    • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
    • Durable 308 stainless steel MIG welds
  • MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94009 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1987 - GMC R2500 Suburban V - Front 8 Cyl 7.4L 454

MagnaFlow Performance Exhaust
  • Standard Grade Universal Catalytic Converter - 2.25in.
  • with Single Exhaust Cutting and Welding Required
  • Magnaflow Standard Grade Universal Catalytic Converter - 2.25in.
  • Universal Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
  • Product Attributes:
    • Inlet Orientation: Straight
    • Air Tube Count: 0
    • Tube Material: Stainless Steel
    • Outlet Gasket Included: No
    • Outlet Mounting Hardware Included: No
    • Body Width: 5.5
    • Body Height: 3.75
    • Inlet Mounting Hardware Included: No
    • Body Material: Stainless Steel
    • Clamps Included: No
    • Outlet Quantity: 1
    • Air Tube Adaptable: No
    • California Air Resources Board (CARB) Certified: No
    • Inlet Gasket Included: No
    • Heat Shield Attached: Yes
    • Hangers Included: No
    • CARB Executive Order Number: Not Applicable
    • Body Type: Clam-shell
    • Heat Shield Material: Aluminized Steel
    • Inlet Inside Diameter: 2.25
    • Substrate Material: Ceramic
    • Outlet Orientation: Straight
    • Inlet Quantity: 1
    • Outlet Inside Diameter: 2.25
    • Sensor Port Count: 0
  • Features:
    • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
    • Compact, lightweight construction enables installation in confined areas, welding is required
    • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
    • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
    • Durable 308 stainless steel MIG welds
  • MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94005 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1987 - Lincoln Continental V - Rear Left 8 Cyl 5.0L 302

MagnaFlow Performance Exhaust
  • Standard Grade Universal Catalytic Converter - 2.25in.
  • Cutting and Welding Required
  • Magnaflow Standard Grade Universal Catalytic Converter - 2.25in.
  • Universal Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
  • Product Attributes:
    • Inlet Orientation: Straight
    • Air Tube Count: 0
    • Tube Material: Stainless Steel
    • Outlet Gasket Included: No
    • Outlet Mounting Hardware Included: No
    • Body Width: 5.5
    • Body Height: 3.75
    • Inlet Mounting Hardware Included: No
    • Body Material: Stainless Steel
    • Clamps Included: No
    • Outlet Quantity: 1
    • Air Tube Adaptable: No
    • California Air Resources Board (CARB) Certified: No
    • Inlet Gasket Included: No
    • Heat Shield Attached: Yes
    • Hangers Included: No
    • CARB Executive Order Number: Not Applicable
    • Body Type: Clam-shell
    • Heat Shield Material: Aluminized Steel
    • Inlet Inside Diameter: 2.25
    • Substrate Material: Ceramic
    • Outlet Orientation: Straight
    • Inlet Quantity: 1
    • Outlet Inside Diameter: 2.25
    • Sensor Port Count: 0
  • Features:
    • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
    • Compact, lightweight construction enables installation in confined areas, welding is required
    • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
    • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
    • Durable 308 stainless steel MIG welds
  • MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94005 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1987 - Lincoln Mark VII V - Rear Left 8 Cyl 5.0L 302

MagnaFlow Performance Exhaust
  • Standard Grade Universal Catalytic Converter - 2.25in.
  • To 9/1/1987 Cutting and Welding Required
  • Magnaflow Standard Grade Universal Catalytic Converter - 2.25in.
  • Universal Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
  • Product Attributes:
    • Inlet Orientation: Straight
    • Air Tube Count: 0
    • Tube Material: Stainless Steel
    • Outlet Gasket Included: No
    • Outlet Mounting Hardware Included: No
    • Body Width: 5.5
    • Body Height: 3.75
    • Inlet Mounting Hardware Included: No
    • Body Material: Stainless Steel
    • Clamps Included: No
    • Outlet Quantity: 1
    • Air Tube Adaptable: No
    • California Air Resources Board (CARB) Certified: No
    • Inlet Gasket Included: No
    • Heat Shield Attached: Yes
    • Hangers Included: No
    • CARB Executive Order Number: Not Applicable
    • Body Type: Clam-shell
    • Heat Shield Material: Aluminized Steel
    • Inlet Inside Diameter: 2.25
    • Substrate Material: Ceramic
    • Outlet Orientation: Straight
    • Inlet Quantity: 1
    • Outlet Inside Diameter: 2.25
    • Sensor Port Count: 0
  • Features:
    • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
    • Compact, lightweight construction enables installation in confined areas, welding is required
    • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
    • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
    • Durable 308 stainless steel MIG welds
  • MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94005 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:
Vehicle Block CC Engine CID
1987 - BMW 325e L 2693 6 Cyl 2.7L -
Showing 1 - 10 of 514 products

Loading...