Image
Product
Price
- Includes Muffler And Tailpipe;Not Legal For Sale Or Use In California
- Exhaust Kit; Includes Muffler And Tailpipe;
- Exhaust Kit
- Product Attributes:
- Exhaust Type: Single
- Exit Position: Oem
- Tip Diameter: N/a
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm; Http://www.p65warnings.ca.gov/
- Exit Style: Turn Out
- Inlet Inside Diameter: N/a
- Outlet Outside Diameter: N/a
-
Features:
- Exhaust Kit
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1989 - Jeep Wrangler | L | - | 4 Cyl 2.5L | 150 |
- Includes Complete Kit;Not Legal For Sale Or Use In California
- Exhaust Kit; Includes Complete Kit;
- Exhaust Kit
- Product Attributes:
- Exhaust Type: Single
- Exit Position: Oem
- Tip Diameter: N/a
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm; Http://www.p65warnings.ca.gov/
- Exit Style: Turn Out
- Inlet Inside Diameter: N/a
- Outlet Outside Diameter: N/a
-
Features:
- Exhaust Kit
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1989 - Jeep Wrangler | L | - | 4 Cyl 2.5L | Sahara | 150 |
- 3 in. Into 2.5 in.; Includes Connecting Pipes/Mufflers/Hardware/6.69 in. x 3 in. x 5.63 in. Single Rectangle Rolled Angle-Cut Tips; Split Rear Exit;50 State Legal / California Emissions Compliant T-304 Stainless Steel
- S-Type Cat-Back™ Exhaust System; 3 in. Into 2.5 in.; Includes Connecting Pipes/Mufflers/Hardware/6.69 in. x 3 in. x 5.63 in. Single Rectangle Rolled Angle-Cut Tips; Split Rear Exit;
- S-Type Cat-Back™ Exhaust System
- Product Attributes:
- Tail Pipe Diameter: 2.500 In.
- Tail Pipe Material: Stainless Steel
- Exhaust Type:
- Axle-back
- Single
- Muffler Type: Turbo
- Exit Position: Split Rear
- Tip Diameter: 6.600 In.
- System Type: Cat Back
- WARNING CA Proposition 65: Yes
- Exit Style: Straight
- Outlet Outside Diameter: 2.500 In.
-
Features:
- Straight-Through Technology
- Aggressive
- Maximum Flow And Power
- CNC Manufacturing Ensures An Accurate Fit
- Made From High-Quality T-304 Austenitic Stainless Steel
- Mandrel Bent Pipes
- Ensures Legendary Quality And Durability
- Million Mile Warranty
- The BORLA(R) sound of power. Its been described as asonic shot of adrenaline. An intoxicating concert ofsteel, gears and combustion that echoes from thespeedways, deserts and highways of the world.The sound of more victory laps than any otherbrand, the BORLA(R) exhaust note has become the quintessentioal soundtrack of high-performance motoring. And like all good automotive designs there is function behing the form. As any driving enthusiast knows, the sound of an exhaust provides more than just ear candy. Its a communications conduit between car and driver. A link between human and machine. The exhaust sound provides accoustic feedback of engine rpm to aid the driver in critical decisions such as gear selection or throttle input in rev-match shifting. At BORLA(R), we understand this concept better than any exhaust manufacturer. Combining patented technology with computer modeling, extensive prototyping and advanced sound analysis tools. BORLA(R) engineers spend countless hours tuning exhaust systems to best reflect the personality and performance of vehicle applications. The result is an enhanced driving experience. With unrivaled clarity, the BORLA(R) exhaust note can help a driver stay within the powerband through a difficult section, using the exciting sensory feedback of sound. With unrivaled clarity the Borla exhaust note can help a driver stay within the powerband through a difficult section, using the exciting sensry feedback of sound.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1989 - Chevrolet Corvette | V | - | 8 Cyl 5.7L | 350 |
- Dual Split Rear Exit
- Street Series Stainless Cat-Back System
- Street Series Stainless Cat-Back System
- Product Attributes:
- Main Piping Diameter: 3
- Muffler Type: Straight-through
- Tip Diameter: 3.5
- Muffler Finish: Satin
- Tip Finish: Polished
- Tip Shape: Round
- Exit Style: Dual Split Rear
- Tip Type: Welded;single Wall;angle Cut;cut Edge
- Inlet Connection Type: Bolt-on
- Subtitle: Cat-back
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1989 - Chevrolet Camaro | V | - | 8 Cyl 5.0L | 305 |
- Single; Single Side Exit; Includes 3 in. Tailpipe/70 Series(TM) Big Block II Muffler;50 State Legal / California Emissions Compliant
- Force II Cat Back System; Single; Single Side Exit; Includes 3 in. Tailpipe/70 Series™ Big Block II Muffler;
- Force II Cat Back System
- Product Attributes:
- Tip Quantity: 0
- Exhaust Type: Single
- Sound Level: Mild
- WARNING CA Proposition 65: No
- Exhaust Series: Force Ii
- Heat Shield Attached: No
- Exit Style: Straight
- Muffler Series: 70 Series Big Block
- Inlet Inside Diameter: N/a
- Exit Position: Single Side
- Tip Diameter: N/a
- Muffler Count: 1
- Single or Dual: Single
- System Type: Cat Back
- Muffler Part Number: 53070
-
Features:
- Mandrel Bent 16 Gauge Aluminized Tubing
- Mild Exterior Exhaust Tone
- Includes Hangers And Hardware For Easy Installation
- Dyno Tuned for Maximum Performance
- Premium Flowmaster Quality
- 3 Year Limited Warranty
- For the person who wants a subtle custom appearance with all the benefits that a Flowmaster Cat-back exhaust system provides. S.O.S. (Single out side) systems are the perfect choice. Our Force II systems delivers a moderate exterior tone and mild to moderate interior tone, and are suited to customers looking for efficiency improvements without a lot of noise. This system is constructed from large 3.00-inch mandrel-bent aluminized steel tubing flowing into a 70 Series Big Block II muffler for a deep mellow tone. The 3.00-inch tailpipe uses the factory hangers for a quick and easy installation and is finished off with a turn down style tip cut into the tubing. This exit location is especially recommended for towing applications since it will not be blowing exhaust on your boat or trailer. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage. Designed for an easy fit, these systems include all necessary parts and hardware for easy installation. Notes: Fits 2/4 wheel drive models and all wheelbases. Covered by our 3-year Limited Warranty.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
619656, 817135
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | CID |
|---|---|---|---|---|---|
| 1989 - Ford F-150 | V | 5753 | 8 Cyl 5.8L | 81.0 | 351 |
- Dual Split Rear Exit
- Street Series Stainless Cat-Back System
- Street Series Stainless Cat-Back System
- Product Attributes:
- Main Piping Diameter: 2.5
- Muffler Type: Straight-through
- Tip Diameter: 3
- Muffler Finish: Satin
- Tip Finish: Polished
- Tip Shape: Round
- Exit Style: Dual Split Rear
- Tip Type: Clamp-on;single Wall;angle Cut;cut Edge
- Muffler Quantity: 2
- Inlet Connection Type: Bolt-on
- Subtitle: Cat-back
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1989 - Ford Mustang | V | - | 8 Cyl 5.0L | LX | 302 |
- Quad Split Rear Exit
- Street Series Stainless Cat-Back System
- Street Series Stainless Cat-Back System
- Product Attributes:
- Main Piping Diameter: 2.5
- Muffler Type: Straight-through
- Tip Diameter: 3.5
- Muffler Finish: Satin
- Tip Finish: Polished
- Tip Shape: Round
- Exit Style: Quad Split Rear
- Tip Type: Welded;single Wall;angle Cut;rolled Edge
- Inlet Connection Type: Clamp-on
- Subtitle: Cat-back
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1989 - Chevrolet Corvette | V | - | 8 Cyl 5.7L | 350 |
- Dual Split Rear Exit
- Street Series Stainless Cat-Back System
- Street Series Stainless Cat-Back System
- Product Attributes:
- Muffler Type: Straight-through
- Tip Finish: Polished
- Exit Style: Dual Split Rear
- Tip Length: 12.5
- Tip Type: Clamp-on;single Wall;turndown;cut Edge
- Muffler Quantity: 2
- Subtitle: Cat-back
- Main Piping Diameter: 2.5
- Tip Diameter: 3
- Muffler Finish: Satin
- Tip Shape: Round
- Inlet Connection Type: Bolt-on
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1989 - Ford Mustang | V | - | 8 Cyl 5.0L | GT | 302 |
- Dual Straight Driver Side Rear Exit
- Touring Series Stainless Cat-Back System
- Touring Series Stainless Cat-Back System
- Product Attributes:
- Main Piping Diameter: 2.25
- Muffler Type: Straight-through
- Tip Diameter: 3
- Muffler Finish: Satin
- Tip Finish: Polished
- Tip Shape: Round
- Exit Style: Dual Straight Driver Side Rear
- Tip Type: Welded;double Wall;angle Cut;folded Edge
- Inlet Connection Type: Bolt-on
- Subtitle: Cat-back
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1989 - BMW 325iX | L | 2494 | 6 Cyl 2.5L | 152 |
- Turn Down In Front Of Rear Tire Exit
- Competition Series Stainless Cat-Back System
- Competition Series Stainless Cat-Back System
- Product Attributes:
- Muffler Type: Straight-through
- Tip Finish: Polished
- Exit Style: Turndown In Front Of Rear Tire
- Tip Length: 9
- Tip Type: Clamp-on;single Wall;turndown;cut Edge
- Muffler Quantity: 2
- Subtitle: Cat-back
- Main Piping Diameter: 2.5
- Tip Diameter: 2.75
- Muffler Finish: Satin
- Tip Shape: Round
- Inlet Connection Type: Bolt-on
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1989 - Ford Mustang | V | - | 8 Cyl 5.0L | 302 |
Showing 1 - 10 of 30 products
Loading...