Image
Product
Price
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2010 - Saab 9-3 | Turbocharger to Pipe (Hot Side) |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Original OE Formulated
- with 302mm - Outside Diameter Brake Disc
- with Shims
- They are sold as a set and only quantity 1 is required for both wheels
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2010 - Saab 9-3X | Front |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Original OE Formulated
- with 302mm/11.9in Outside Diameter Brake Disc
- with Shims
- They are sold as a set and only quantity 1 is required for both wheels
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2010 - Saab 9-3 | Front |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Original OE Formulated
- with 285mm/11.2in Outside Diameter Brake Disc
- with Shims
- They are sold as a set and only quantity 1 is required for both wheels
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2010 - Saab 9-3 | Front |
- Schrader EZ-sensor Snap-in
- Use 33560 if 33500 is not available Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm Attachment Type: Snap-in Angle Type: Fixed Angled Stem: Fixed angle Plastic Housing Material Nickel-Coated Core
- Programmable for 314.9, 315 and 433MHz Applications
- Product Attributes:
- Washer Included: No
- Mounting Hardware Included: Yes
- Grommets Included: No
- Manufacturer Warranty: 2 Years
- California Prop 65 Warning Label (Text): Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects And Other Reproductive Harm. For More Information, Go To Www.p65warnings.ca.gov
- Recommended Torque (in/Lbs): 11.5 Inch/lbs.
- Valve Stem Included: Yes
- Monitor Type: Direct
- Real Time Pressure Signal Transmission: Yes
- Attachment Type:
- Snap-fit
- Snap-in
- Mounting Location: Wheel
- Valve Stem Material: Rubber
- Programmed/Programmable: Programmable
- Frequency: 315 / 314.9 / 433
- Activation Type: Not Programmed, Programmable
- Core Material: Nickel-coated
- Recommended Torque (N-m): 1.3 N-m
- Valve Cap Included: Yes
- Valve Color: Black
- Material: Rubber
- Power Source: Battery
-
Features:
- Easy to program and covers the majority of vehicles on the road in North America
- Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
- Engineered and manufactured to OEM design and quality specifcations
- Rubber valve can be replaced by Schrader rubber snap-in valve kit 20018, or with clamp-in fixed aluminum valve stem 34000 (silver) or 34010 (black)
- Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- Always make sure that your TPMS scan and programming tool has the latest software installed to ensure maximum coverage
- Schrader Programmable EZ-sensor with Rubber Snap-In Valve - Must be Programmed to Specific M/M/Y Vehicle
- Sensor comes fully assembled and ready to program and install
- Future-proofed OE quality TPMS product supports new and pending OE technologies
- Schrader EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. Each EZ-sensor must be programmed before installation and needs a compatible TPMS programming tool.This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. EZ-sensor can be interchanged with Schrader replacement rubber snap-in valve stems or fixed angle aluminum clamp-in stems. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.
Additional Fitment Information:
| Vehicle |
|---|
| 2010 - Saab 9-5 |
- Champion Copper Plus- Boxed - RC9YC
- Gap 0.039in; Plug Type RC9YC
- Champion Copper Plus 344 Spark Plug (Carton of 4)
- Copper Plus
- Product Attributes:
- Hex Size:
- 0.625
- 15.880
- Reach: 0.75
- Center Electrode Tip Material: Nickel
- Seat Type: Flat
- Electrical Terminal Type: Removable Nut
- Pre-Gap Size:
- 0.035
- 0.89
- Classification: Champion Copper Plus
- Ground Electrode Core Material: Nickel
- Insulator Height: 0.06
- Plug Type: Rc9yc
- Hex Size:
- Dependable performance. This Champion® spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
4671057, BR7EF, BR7EFS, RC9YC, T22EPU
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2010 - Saab 9-3X | L | 1998 | 4 Cyl 2.0L | 122 |
- 15in Disc Brakes 16in Disc Brakes
- PRIME Ceramic
- Product Attributes:
- Inner Pad Overall Thickness: 20.60
- Grade Type: Premium
- Outer Pad Overall Thickness: 20.60
- Brake System: Teves
- Brake Lubricant Included: Yes
- Inner Pad Width: 155.10
- Outer Pad Height: 70.70
- Outer Pad Width: 156.40
- Pad Shims Included: Yes
- Inner Pad Height: 69.90
- FMSI Number: 7873-d1106
- Chamfered Edges: Yes
- Friction Material Composition: Ceramic
- Pad Wear Sensor Included: No
- Prepared For Pad Wear Sensor: Yes
- Weight: 2.2
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
0986494044, 12800120, 12803551, 12805751, 13046071722, 16-1106, 17-1106, 2373807, 93166943, 93185751, 93188111, 99900004, D1106 7873, DG1106, EUR972, FDB4188, GDB1613, PFB PF7873X...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2010 - Saab 9-3 | Front |
- 16in Disc Brakes
- PRIME Ceramic
- Product Attributes:
- Inner Pad Overall Thickness: 20.60
- Grade Type: Premium
- Outer Pad Overall Thickness: 20.60
- Brake System: Teves
- Brake Lubricant Included: Yes
- Inner Pad Width: 155.10
- Outer Pad Height: 70.70
- Outer Pad Width: 156.40
- Pad Shims Included: Yes
- Inner Pad Height: 69.90
- FMSI Number: 7873-d1106
- Chamfered Edges: Yes
- Friction Material Composition: Ceramic
- Pad Wear Sensor Included: No
- Prepared For Pad Wear Sensor: Yes
- Weight: 2.2
- They are sold as a set and only quantity 1 is required for both wheels
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2010 - Saab 9-3 | Front |
- 16in Disc Brakes From VIN # 81002995
- PRIME Ceramic
- Product Attributes:
- Inner Pad Overall Thickness: 20.40
- Grade Type: Premium
- Outer Pad Overall Thickness: 20.40
- Brake System: Teves
- Brake Lubricant Included: Yes
- Inner Pad Width: 155.20
- Outer Pad Height: 77.70
- Outer Pad Width: 156.40
- Pad Shims Included: Yes
- Inner Pad Height: 72.80
- FMSI Number: 8376-d1257
- Chamfered Edges: Yes
- Friction Material Composition: Ceramic
- Pad Wear Sensor Included: No
- Prepared For Pad Wear Sensor: Yes
- Weight: 2.41
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
0986494280, 105.12570, 12802167, 13046071992, 16-1257, 17-1257, 2340404, 93166941, 93188113, 99900006, D1257 8376, DG1257, EUR915A, FDB1833, GDB1567, MGD1257M, PFB PF8376X, PGD1257M...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2010 - Saab 9-3 | Front |
- Fuel Injector O-Ring Kit
- 0.296 (in) Inside Diameter x 0.574 (in) Outside Diameter
- FEL-PRO ES 70599 Fuel Injector O-Ring Kit for Ford F-150
- Product Attributes:
- Grade Type: Premium
-
Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
019.997.13.48112.997, 0199971348112997, 021 198 031 C, 021198031C, 035 906 149 A, 035906149A, 0K2A5-13-253, 0K2A513253, 10031124, 12458114, 12537425, 12570621, 12574292, 12574332, 12575954, 12576479, 12580647, 12581319...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2010 - Saab 9-5 | V | 2792 | Upper | 6 Cyl 2.8L | 170 |
Showing 1 - 10 of 30 products
Loading...