Image
Product
Price
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2020 - Hyundai Elantra | Rear Left |
- Door Latch / Actuator Motor Assembly
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2020 - Hyundai Elantra | Rear Left |
- OEM Grade Direct-Fit Catalytic Converter
- Not legal for sale or installation in California, Colorado or New York.
- Magnaflow OEM Grade Direct-Fit Catalytic Converter
- Product Attributes:
- Air Tube Count: 0
- Inlet Gasket Included: Yes
- Tube Material: Stainless Steel
- Outlet Gasket Included: Yes
- Series: Oem Grade
- Grade Type: Regular
- Hangers Included: Yes
- Heat Shield Attached: No
- Outlet Mounting Hardware Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Spun
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Substrate Material: Ceramic
- Finish: Stainless Steel
- Clamps Included: Yes
- Prop 65 Y/N: No
- Sensor Port Count: 0
- Title: Magnaflow 2019-2020 Hyundai Santa Fe Oem Grade Federal / Epa Compliant Direct-fit Catalytic Converter
- California Air Resources Board (CARB) Certified: No
-
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 280049. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2019-2020 Hyundai Santa Fe and interchanges with OE part 28600-S2320. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
This Part Fits the Following OEM/Substitute Numbers:
28600-S2320
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Drive Type | CID |
|---|---|---|---|---|---|
| 2020 - Hyundai Santa Fe | L | 2359 | 4 Cyl 2.4L | FWD | - |
- Door Latch / Actuator Motor Assembly
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2020 - Hyundai Elantra | Front Left |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2020 - Hyundai Elantra | Front |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2020 - Hyundai Kona | Rear | Essential | AWD |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2020 - Hyundai Kona | L | 1591 | 4 Cyl 1.6L | 97 |
- Door Latch / Actuator Motor Assembly
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2020 - Hyundai Elantra | Front Left |
- Universal Clamp-On Air Filter
- Round Tapered; OD-4 3/8 in./6.5 in.; Flange L-1 in.; Inside Flange 5 in.; Centered; Rubber End; Filter Length 7 in.
- Regardless of the angle or offset diameter of an air intake; there is probably a K/N Universal air filter for your equipment. K/N universal air filters are washable and reusable.
- Universal Air Cleaner Assembly
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Flange Offset: 0.000 In. (0mm)
- Flange Length: 1.000 In. (25mm)
- WARNING CA Proposition 65: Yes
- Base Outside Diameter: 6.500 In. (165mm)
- Item Weight: 1.700 Lbs. (0.8 Kg)
- Base Inside Diameter: 0.000 In. (0mm)
- Machine Washable: Yes
- Product Box Height: 8.690 In. (221mm)
- Filter Material: Cotton Gauze
- Product Box Width: 8.130 In. (206 Mm)
- Product Box Length: 8.190 In. (208mm)
- Top Inside Diameter: 0.000 In. (0mm)
- Air Filter Large End Diameter: 6.500 In. (165mm)
- Flange/Bore Center to Center: 0.000 In. (0mm)
- Item Height: 7.000 In. (178mm)
- Prop 65 (C, R or CR): Cr
- Number of Flanges: 1
- Top Style: Rubber
- Pre-Screened: No
- Automotive Item Grade: High Performance
- Inner Wire: No
- Top Material: None
- Flange Angle: 0 Degree
- Shape: Round Tapered
- Top Outside Diameter: 4.375 In. (111mm)
- Package Material: Paperboard
- Filter Re-Oiling Amount: 1.61 Oz (48 Ml)
- Flange Inside Diameter: 5.000 In. (127mm)
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Flange Type: Centered
- Package Type: Box
-
Features:
- Designed To Increase Horsepower And Acceleration
- High Air Flow With Excellent Filtration
- Clamp-On Washable and Reusable Air Filter
- Malleable Flanges
- One Year Limited Warranty
- K&N's Universal Air Filters are designed and manufactured for a wide variety of applications including racing vehicles, radio-controlled cars, generators, snowmobiles, tractors, and other applications. Regardless of the angle or offset diameter of the air intake, there is probably a K&N Universal air filter for your equipment. All filters are constructed with ultra-strong molded pliable rubber flanges which absorb vibration and allow for secure attachment and can also be stretched for up to 1/16 of an inch (1.5mm) to fit in-between sizes. K&N universal air filters are washable and reusable.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2020 - Hyundai Veloster | L | 1591 | 4 Cyl 1.6L | Turbo Ultimate | - |
- OEM Grade Direct-Fit Catalytic Converter
- Not legal for sale or installation in California, Colorado or New York.
- Magnaflow OEM Grade Direct-Fit Catalytic Converter
- Product Attributes:
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Series: Oem Grade
- Grade Type: Regular
- Hangers Included: No
- Heat Shield Attached: No
- Outlet Mounting Hardware Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Spun
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Substrate Material: Ceramic
- Finish: Stainless Steel
- Clamps Included: Yes
- Prop 65 Y/N: No
- Sensor Port Count: 0
- Title: Magnaflow 2016-2021 Hyundai Tucson Oem Grade Federal / Epa Compliant Direct-fit Catalytic Converter
- California Air Resources Board (CARB) Certified: No
-
Features:
- Torca AccuSeal® Exhaust Clamps provide a full 360-degree equally distributed clamping force preventing pipe distortion while creating a complete seal and maintaining serviceability
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
- OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 280055. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2016-2021 Hyundai Tucson and interchanges with OE parts 28600-D3380 and 28600-D3470, among others. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
This Part Fits the Following OEM/Substitute Numbers:
28600-D3380, 28600-D3470, 28600-D3570, 28600-D3770
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Drive Type | CID |
|---|---|---|---|---|---|
| 2020 - Hyundai Tucson | L | 2359 | 4 Cyl 2.4L | AWD | - |
Showing 1 - 10 of 74 products
Loading...