Image
Product
Price
- OEM Grade Direct-Fit Catalytic Converter
- Not legal for sale or installation in California, Colorado or New York.
- Magnaflow OEM Grade Direct-Fit Catalytic Converter
- Product Attributes:
- Air Tube Count: 0
- Inlet Gasket Included: No
- Tube Material: Stainless Steel
- Oxygen Sensor Location: Midbed
- Outlet Gasket Included: No
- Series: Oem Grade
- Grade Type: Regular
- Hangers Included: No
- Heat Shield Attached: No
- Outlet Mounting Hardware Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Spun
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Substrate Material: Ceramic
- Finish: Stainless Steel
- Clamps Included: No
- Prop 65 Y/N: No
- Sensor Port Count: 1
- Title: Magnaflow 2019-2023 Kia Forte Oem Grade Federal / Epa Compliant Direct-fit Catalytic Converter
- California Air Resources Board (CARB) Certified: No
-
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 280579. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2019-2023 Kia Forte. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2020 - Kia Forte | L | 1999 | 4 Cyl 2.0L | 122 |
- OEM Grade Direct-Fit Catalytic Converter
- Not legal for sale or installation in California, Colorado or New York.
- Magnaflow OEM Grade Direct-Fit Catalytic Converter
- Product Attributes:
- Air Tube Count: 0
- Inlet Gasket Included: Yes
- Tube Material: Stainless Steel
- Outlet Gasket Included: Yes
- Series: Oem Grade
- Grade Type: Regular
- Hangers Included: Yes
- Heat Shield Attached: No
- Outlet Mounting Hardware Included: Yes
- CARB Executive Order Number: Not Applicable
- Body Type: Spun
- Inlet Mounting Hardware Included: Yes
- Body Material: Stainless Steel
- Substrate Material: Ceramic
- Finish: Stainless Steel
- Clamps Included: Yes
- Prop 65 Y/N: No
- Sensor Port Count: 0
- Title: Magnaflow 2020-2022 Kia Soul Oem Grade Federal / Epa Compliant Direct-fit Catalytic Converter
- California Air Resources Board (CARB) Certified: No
-
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 280578. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2020-2022 Kia Soul. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2020 - Kia Soul | L | 1999 | 4 Cyl 2.0L | 122 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle | Engine VIN |
|---|---|
| 2020 - Kia Optima | 1 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2020 - Kia Niro | Front |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle |
|---|
| 2020 - Kia K900 |
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2020 - Kia Sorento | V | 3342 | 6 Cyl 3.3L | - |
- Bypass Pipe To Lower Thermostat Housing
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2020 - Kia Stinger | V | 3342 | 6 Cyl 3.3L | - |
Additional Fitment Information:
| Vehicle |
|---|
| 2020 - Kia K900 |
- Front Rear Coated Disc Brake Rotors Kit For Hyundai Elantra Kia Forte Veloster
- Genius Front Rear Coated Disc Brake Rotors Kit For Hyundai Elantra Kia Forte Veloster KG-101280
- Genius Rotors Kit
- Product Attributes:
- WebNameEbay4: For Hyundai Elantra Kia Forte Veloster Front Rear Coated Disc Brake Rotors Kit
- ComponentsSummaryRegularWithBrands: 4x Genius Disc Brake Rotor
- ComponentsSummaryShort: 4x Disc Rotor
- ComponentsSummaryLongWithBrands: 2x Front Coated Genius Disc Brake Rotor (both Side) + 2x Rear Genius Disc Brake Rotor (both Side)
- WebNamePlain: Genius Front Rear Coated Disc Brake Rotors Kit Kg-101280
- ComponentsSummaryShortWithBrands: 4x Genius Disc Rotor
- NumberOfPieces: 4
- ComponentsSummaryLong: 2x Front Coated Disc Brake Rotor (both Side) + 2x Rear Disc Brake Rotor (both Side)
- WebNameLong: Genius Front Rear Coated Disc Brake Rotors Kit For Hyundai Elantra Kia Forte Veloster Kg-101280
- WebNameShort: Front Rear Coated Disc Brake Rotors Kit For Hyundai Elantra Kia Forte Veloster Kg-101280
- ComponentsSummaryRegular: 4x Disc Brake Rotor
- WebNameRegular: Genius Front Rear Coated Disc Brake Rotors Kit For Hyundai Elantra Kia Forte Veloster Kg-101280
- WebNameEbay2: [front+rear] Coated Disc Brake Rotors Kit For Hyundai Elantra Kia Forte Veloster
- WebNameEbay3: Coated Disc Brake Rotors Front Rear Kit For Hyundai Elantra Kia Forte Veloster
- WebNameEbay: Front Rear Coated Disc Brake Rotors Kit For Hyundai Elantra Kia Forte Veloster
-
Features:
- Engineered with with Carbon-Enhanced G-Cast™ (G11H18/G3000) iron castings to achieve an optimal braking performance (strength, stability, durability)
- Exclusive G-Coat™ double-layer (8µm) protective coating provides rust protection on 100% of the non-braking surface
- 100% Precision Spin and Mill-Balanced for smoother stopping and zero vibration at any speed
- Cross-Hatched smooth surface to improve the pad's ability to grip the rotor surface, especially during initial brake applications or in wet conditions
- Double disc ground finish eliminates lateral run-out and DTV (disk thickness variation) issues on the rotor and improves pad-rotor bed-in
- Tested for maximum tolerance to voluminous amount of constant thermal cycles
- CNC-Machined to the tightest tolerances to guarantee manufacturing precision and accuracy
- Best matched with CMX, TEC, SIM or Positive Plus brake pads
- Kit Includes: 2x Front Coated Disc Brake Rotor (Both Side) + 2x Rear Disc Brake Rotor (Both Side)
- Part Reference Numbers : AC60075 AR60075 CR60075 PR60075 YH539668C YH539668 120.51054 121.51054 BR901380 HY-3103 2488821773 488821773 7488821773 901380 940855 610046 EC1981958 981958 BHY1015 BD180793E BD180793 AC60665 AR60665 CR60665 PR606
- Genius has been the undisputed leader in coated rotor manufacturing for the last 15 years thanks to it's groundbreaking lab engineered G-Cast™ iron cast and G-Coat™ dipped conative. Genius in-house engineered managed to develop the best combination of iron cast and coating to produce unmatched protection that adhere and stay durable for the lifetime of the rotor, without compromising on the rotor braking performance. With a long-established presence in the industry, Genius has garnered the trust and loyalty of countless customers across the continent. Their disc rotors and drums are known for their durable coating without compromise. Genius' commitment to excellence has solidified their position as the go-to brand for professionals and car enthusiasts seeking convenient and durable rotors in North America.
This Part Fits the Following OEM/Substitute Numbers:
120.51053, 120.51054, 121.51053, 121.51054, 248882143, 2488821773, 48882143, 488821773, 610046, 610065, 748882143, 7488821773, 901380, 901602, 940855, 941617, 981958, 982143...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2020 - Kia Forte | L | 1591 | Front and Rear | 4 Cyl 1.6L | 97 |
- Front Rear Ceramic Pad And Disc Brake Rotors Kit For Hyundai Tucson Kia Sportag
- With Manual Parking Brake
- Transit Auto Front Rear Ceramic Pads And Disc Brake Rotors Kit For Hyundai Tucson Kia Sportage K8A-102805
- CMX Rotors And NWF
- Product Attributes:
- WebNameEbay4: For Hyundai Tucson Kia Sportage Front Rear Ceramic Pad And Disc Brake Rotors Kit
- ComponentsSummaryRegularWithBrands: 4x Cmx Disc Brake Rotor, 2x Ameribrakes Brake Pad Set
- ComponentsSummaryShort: 4x Disc Rotor 2x Brake Pad
- ComponentsSummaryLongWithBrands: 2x Front Cmx Disc Brake Rotor (both Side) + 1x Front Ceramic Ameribrakes Brake Pad Set (hardware Included) + 2x Rear Cmx Disc Brake Rotor (both Side) + 1x Rear Ceramic Ameribrakes Brake Pad Set (hardware Included)
- WebNamePlain: Transit Auto Front Rear Ceramic Pads And Disc Brake Rotors Kit K8a-102805
- ComponentsSummaryShortWithBrands: 4x Cmx Disc Rotor 2x Ameribrakes Brake Pad
- NumberOfPieces: 6
- ComponentsSummaryLong: 2x Front Disc Brake Rotor (both Side) + 1x Front Ceramic Brake Pad Set (hardware Included) + 2x Rear Disc Brake Rotor (both Side) + 1x Rear Ceramic Brake Pad Set (hardware Included)
- WebNameLong: Transit Auto Front Rear Ceramic Pads And Disc Brake Rotors Kit For Hyundai Tucson Kia Sportage K8a-102805
- WebNameShort: Front Rear Ceramic Pads And Disc Brake Rotors Kit For Hyundai Tucson Kia Sportage K8a-102805
- ComponentsSummaryRegular: 4x Disc Brake Rotor, 2x Brake Pad Set
- WebNameRegular: Transit Auto Front Rear Ceramic Pads And Disc Brake Rotors Kit For Hyundai Tucson Kia Sportage K8a-102805
- WebNameEbay2: [front+rear] Ceramic Pad & Disc Brake Rotors Kit For Hyundai Tucson Kia Sportage
- WebNameEbay3: Ceramic Pad And Disc Brake Rotors Front Rear Kit For Hyundai Tucson Kia Sportage
- WebNameEbay: Front Rear Ceramic Pad And Disc Brake Rotors Kit For Hyundai Tucson Kia Sportage
-
Features:
- AmeriBRAKES pads are engineered with vehicle-optimized formulas matching OE specs for optimal braking
- Engineered with carbon-enhanced XCast™ (G3000) iron castings to achieve an optimal wear resistance, tensile strength and steel hardness providing unmatched braking performance
- Exclusive carbon enhanced materials to ensure optimal all-condition performance
- 100% Precision Spin and Mill-Balanced for smoother stopping and zero vibration at any speed
- 1:1 OE Design - Chamfered and slotted only when applicable to ensure safety and perfect fit
- Cross-Hatched smooth surface to improve the pad's ability to grip the rotor surface, especially during initial brake applications or in wet conditions
- OE Designed shims for virtually no vibration and noiseless braking
- Kit Includes: 2x Front CMX Disc Brake Rotor (Both Side) + 1x Front Ceramic AmeriBRAKES Brake Pad Set (Hardware Included) + 2x Rear CMX Disc Brake Rotor (Both Side) + 1x Rear Ceramic AmeriBRAKES Brake Pad Set (Hardware Included)
- Kit Variations: K8C-101346 K8F-101484 K8S-102710 K8T-101607 KDA-101488 KDC-100561 KDF-100867 KDS-100779 KDT-100899 KGA-101647 KGC-101134 KGF-101164 KGS-101738 KGT-101254
- Part Reference Numbers : AC60075 AR60075 CR60075 PR60075 YH539668C YH539668 120.51054 121.51054 BR901380 HY-3103 2488821773 488821773 7488821773 901380 940855 610046 Q1981958 981958 AHY1015 BD180793 PRC1847 9075 SG9075X SS9075X D1847 1847
- Transit Auto offers the most comprehensive and highest-quality replacement kits on the market. Thanks to our cutting-edge AI, in-house product team, and proprietary fitment data, we are able to build and deliver the most accurate kits on the market. All our kits include the highest-quality parts on the market, sourced directly by Transit and its sub-brands. Backed by over 50 years of experience and with in-house quality assurance, every customer can purchase and drive with peace of mind. Transit Auto is the largest kit supplier, with over 100,000 kits, and the only supplier to provide the true picture of the kits and the complete buyer's guide. Whether you are a Do-It-Yourself enthusiast, a Mechanic, or a Garage, we have the right kit for you.
This Part Fits the Following OEM/Substitute Numbers:
120.51051, 120.51054, 121.51051, 121.51054, 1847, 1848, 248882104, 2488821773, 48882104, 488821773, 610033, 610046, 748882104, 7488821773, 8428, 901380, 901476, 9075...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Aspiration |
|---|---|---|
| 2020 - Kia Sportage | Front and Rear | Naturally Aspirated |
Showing 1 - 10 of 81 products
Loading...