Image
Product
Price
- Schrader EZ-sensor Snap-in
- Use 33560 if 33500 is not available Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm Attachment Type: Snap-in Angle Type: Fixed Angled Stem: Fixed angle Plastic Housing Material Nickel-Coated Core
- Programmable for 314.9, 315 and 433MHz Applications
- Product Attributes:
- Washer Included: No
- Mounting Hardware Included: Yes
- Grommets Included: No
- Manufacturer Warranty: 2 Years
- California Prop 65 Warning Label (Text): Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects And Other Reproductive Harm. For More Information, Go To Www.p65warnings.ca.gov
- Recommended Torque (in/Lbs): 11.5 Inch/lbs.
- Valve Stem Included: Yes
- Monitor Type: Direct
- Real Time Pressure Signal Transmission: Yes
- Attachment Type:
- Snap-fit
- Snap-in
- Mounting Location: Wheel
- Valve Stem Material: Rubber
- Programmed/Programmable: Programmable
- Frequency: 315 / 314.9 / 433
- Activation Type: Not Programmed, Programmable
- Core Material: Nickel-coated
- Recommended Torque (N-m): 1.3 N-m
- Valve Cap Included: Yes
- Valve Color: Black
- Material: Rubber
- Power Source: Battery
-
Features:
- Easy to program and covers the majority of vehicles on the road in North America
- Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
- Engineered and manufactured to OEM design and quality specifcations
- Rubber valve can be replaced by Schrader rubber snap-in valve kit 20018, or with clamp-in fixed aluminum valve stem 34000 (silver) or 34010 (black)
- Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- Always make sure that your TPMS scan and programming tool has the latest software installed to ensure maximum coverage
- Schrader Programmable EZ-sensor with Rubber Snap-In Valve - Must be Programmed to Specific M/M/Y Vehicle
- Sensor comes fully assembled and ready to program and install
- Future-proofed OE quality TPMS product supports new and pending OE technologies
- Schrader EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. Each EZ-sensor must be programmed before installation and needs a compatible TPMS programming tool.This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. EZ-sensor can be interchanged with Schrader replacement rubber snap-in valve stems or fixed angle aluminum clamp-in stems. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.
Additional Fitment Information:
| Vehicle |
|---|
| 2024 - Subaru Ascent |
- FRAM, PH9688, Oil Filter
- Spin-on Oil Filter
- Extra Guard
- Product Attributes:
- Reusable: No
- Grade Type: Regular
- Replacable Filter: Yes
- Gasket Inside Diameter: 2.130
- Non Slip Grip: Yes
- Gasket Thickness: 0.200
- Torque Nut: No
- Attachment Type: Spin-on
- Burst Pressure: 310.000
- Gasket Type: Base
- Housing Color: Orange
- Inside Thread Diameter: M20x1.5
- Bypass Relief Valve Setting: 9-15
- Grade: Advanced
- Gasket Outside Diameter: 2.420
- Meets Or Exceeds Original Equipment Manufacturer Specifications: Yes
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
-
Features:
- Proven protection for up to 10,000 miles (16,000 kilometers)
- Engineered for use with synthetic or conventional motor oils
- SureGrip® technology for easy install and removal
- Filter media is a blend of fiber and resin that captures 95% of the dirt particles
- Silicone anti-drain back valve helps ensure safe engine start up
- FRAM Extra Guard® oil filters deliver advanced engine protection for everyday drivers who perform routine oil changes at OE (original equipment) recommended intervals. Equipped with SureGrip® technology, FRAM Extra Guard® oil filters provide a non-slip surface allowing for easy install and removal. The silicone anti-drain back valve ensures safe engine startups, extending the life of the oil filter for up to 10,000 miles (16,000 kilometers).
This Part Fits the Following OEM/Substitute Numbers:
102703301, 122-0827, 1301, 1334, 15208-AA031, 15208-AA100, 15208-AA130, 15208-AA170, 15241-32092, 15410-ZJA-99AH, 16271-32090, 16271-32092, 16546-65F0E, 17-1706-8, 17-1723-6, 17-1741-2, 17-1893-0, 183...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2024 - Subaru WRX | H | 2387 | 4 Cyl 2.4L | 146 |
- FRAM, XG9688, Oil Filter
- Spin-on Oil Filter
- Ultra Synthetic
- Product Attributes:
- Reusable: No
- Grade Type: Premium
- Replacable Filter: Yes
- Gasket Inside Diameter: 2.130
- Non Slip Grip: Yes
- Gasket Thickness: 0.200
- Torque Nut: No
- Attachment Type: Spin-on
- Burst Pressure: 310.000
- Gasket Type: Base
- Housing Color: Gold
- Inside Thread Diameter: M20x1.5
- Bypass Relief Valve Setting: 9-15
- Grade: Ultimate
- Gasket Outside Diameter: 2.420
- Meets Or Exceeds Original Equipment Manufacturer Specifications: Yes
- Bypass Relief Valve: Yes
- Filter Media Material: Synthetic
- Anti-Drain Back Valve: Yes
-
Features:
- Proven protection for up to 20,000 miles (32,000 kilometers)
- SureGrip® technology for easy install and removal
- Silicone anti-drain back valve helps ensure safe engine start up
- Dual-layered synthetic blend media provides 99%+ filtration efficiency*
- Optimized for synthetic motor oil
- FRAM Ultra Synthetic® oil filters are engineered for drivers who are looking for ultimate performance and engine protection. Its dual-layered synthetic blend media provides 99%+ filtering efficiency and protects up to 20,000 miles (32,000 kilometers). The silicone anti-drain back valve ensures safe engine startups, extending the life of the oil filter. FRAM Ultra Synthetic is equipped with SureGrip® technology that provides a non-slip surface allowing for easy install and removal.
This Part Fits the Following OEM/Substitute Numbers:
102703301, 122-0827, 1301, 1334, 15208-AA031, 15208-AA100, 15208-AA130, 15208-AA170, 15241-32092, 15410-ZJA-99AH, 16271-32090, 16271-32092, 16546-65F0E, 17-1706-8, 17-1723-6, 17-1741-2, 17-1893-0, 1719859...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2024 - Subaru WRX |
- Front Rear Disc Brake Rotors Kit For Subaru Outback WRX Legacy K8-102474
- CMX Front Rear Disc Brake Rotors Kit For Subaru Outback WRX Legacy K8-102474
- CMX Rotor Kit
- Product Attributes:
- WebNameEbay4: For Subaru Outback Wrx Legacy Front Rear Disc Brake Rotors Kit
- ComponentsSummaryRegularWithBrands: 4x Cmx Disc Brake Rotor
- ComponentsSummaryShort: 4x Disc Rotor
- ComponentsSummaryLongWithBrands: 2x Front Cmx Disc Brake Rotor (both Side) + 2x Rear Cmx Disc Brake Rotor (both Side)
- WebNamePlain: Cmx Front Rear Disc Brake Rotors Kit K8-102474
- ComponentsSummaryShortWithBrands: 4x Cmx Disc Rotor
- NumberOfPieces: 4
- ComponentsSummaryLong: 2x Front Disc Brake Rotor (both Side) + 2x Rear Disc Brake Rotor (both Side)
- WebNameLong: Cmx Front Rear Disc Brake Rotors Kit For Subaru Outback Wrx Legacy K8-102474
- WebNameShort: Front Rear Disc Brake Rotors Kit For Subaru Outback Wrx Legacy K8-102474
- ComponentsSummaryRegular: 4x Disc Brake Rotor
- WebNameRegular: Cmx Front Rear Disc Brake Rotors Kit For Subaru Outback Wrx Legacy K8-102474
- WebNameEbay2: [front+rear] Disc Brake Rotors Kit For Subaru Outback Wrx Legacy
- WebNameEbay3: Disc Brake Rotors Front Rear Kit For Subaru Outback Wrx Legacy
- WebNameEbay: Front Rear Disc Brake Rotors Kit For Subaru Outback Wrx Legacy K8-102474
-
Features:
- Engineered with carbon-enhanced XCast™ (G3000) iron castings to achieve an optimal wear resistance, tensile strength and steel hardness providing unmatched braking performance
- 100% Precision Spin and Mill-Balanced for smoother stopping and zero vibration at any speed
- Cross-Hatched smooth surface to improve the pad's ability to grip the rotor surface, especially during initial brake applications or in wet conditions
- Double disc ground finish eliminates lateral run-out and DTV (disk thickness variation) issues on the rotor and improves pad-rotor bed-in
- Tested for maximum tolerance to voluminous amount of constant thermal cycles
- CNC-Machined to the tightest tolerances to guarantee manufacturing precision and accuracy
- Thickness and Metallurgy electronically validated for manufacturing consistency
- Best matched with CMX, TEC, SIM or PPF brake pads
- Kit Includes: 2x Front Disc Brake Rotor (Both Side) + 2x Rear Disc Brake Rotor (Both Side)
- Part Reference Numbers : AC72035 AR72035 CR72035 PR72035 YH657731C YH657731 120.47048 121.47048 BR901776 SU-723 248882567 48882567 748882567 901776 950282 610112 Q1982567 982567 ASU1018 AC72565 AR72565 CR72565 PR72565 YH528603C YH528603 12
- As a leader in the Automotive Braking industry, CMX delivers unrivaled braking solutions that redefine performance, reliability, and safety for your vehicle. CMX offers a comprehensive range of cutting-edge brake components meticulously engineered to meet the demands of do-it-yourself customers, garages and large fleet operators. From high-performance brake pads and rotors, to durable brake drums, reliable brake wheel cylinders, state-of-the-art brake shoes and convenient brake kits, CMX has everything you need to elevate your vehicle's braking system. We delivers the highest standards of quality and reliability for your braking needs, enabling you to drive with confidence, precision, and peace of mind.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2024 - Subaru Legacy | Front and Rear |
- Spin-on Oil Filter
- DEFENSE
This Part Fits the Following OEM/Substitute Numbers:
102703301, 122-0827, 1301, 1334, 15208-AA031, 15208-AA100, 15208-AA130, 15208-AA170, 15241-32092, 15410-ZJA-99AH, 16271-32090, 16271-32092, 16546-65F0E, 17-1706-8, 17-1723-6, 17-1741-2, 17-1893-0, 183...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2024 - Subaru WRX |
Showing 1 - 6 of 6 products
Loading...