Image
Product
Price
- Sportz SUV Tent (with screen room)
- Napier Sportz SUV Tent with Screen Room
- The Sportz SUV Tent connects to the cargo area of your vehicle and with an extra 6? x 7? screen room; you can eat, play, and enjoy the great outdoors bug-free!
Additional Fitment Information:
| Vehicle | Body |
|---|---|
| 1981 - Honda Civic | Hatchback |
- Sportz SUV Tent (with screen room)
- Napier Sportz SUV Tent with Screen Room
- The Sportz SUV Tent connects to the cargo area of your vehicle and with an extra 6? x 7? screen room; you can eat, play, and enjoy the great outdoors bug-free!
Additional Fitment Information:
| Vehicle | Body |
|---|---|
| 1981 - Honda Civic | Hatchback |
- High Capacity V-Belt (Standard)
- Product Attributes:
- Top Width: .41
- Belt Material: Epdm
- Notched: Yes
- Outside Circumference:
- 27.84
- 707
- Construction: Notched
- Cross Section Designation: Hc41
- Effective Length:
- 27
- 686
- Strand Quantity: 1
- Type: High Capacity V-belt (standard)
- Cord Material: Polyester
-
Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
- Gates Automotive XL V-Belt is a durable, long-lasting replacement V-belt designed for the most demanding engine drives. Due to thermal forces in the vehicle engine, this variable notched belt tightens on the drive as it heats up to prevent slippage, improve belt performance and reduce noise.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
010288AB, 037145271E, 052903137B, 052903137D, 052903137F, 052903137L, 068121039A, 068121039E, 068903137AQ, 09319, 09319K, 09370, 0950687, 10270, 1061H, 10A0685, 10A0700, 10AV0687...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1981 - Honda Accord | L | 1751 | Power Steering | GAS | 4 Cyl 1.8L | - |
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Transmission | Trans. Speed | Transmission Manuf. Code |
|---|---|---|---|
| 1981 - Honda Prelude | Automatic | 3 | AK |
- with Honda GVH35 Transmission
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Transmission | Trans. Speed |
|---|---|---|
| 1981 - Honda Civic | Manual | 4 |
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0009802115, 0009811625, 0019814125, 0023416207, 0029813025, 0039818725, 0049813125, 00625027-40, 01T-4812, 01T4818, 02466224, 03154, 040007, 040038, 04103TS, 04897981AA, 04897981AB, 051-3859...VIEW MORE
Additional Fitment Information:
| Vehicle | Transmission | Trans. Speed | Transmission Manuf. Code |
|---|---|---|---|
| 1981 - Honda Civic | Manual | 5 | GM-8 |
- with Honda GVH37 Transmission
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Transmission | Trans. Speed |
|---|---|---|
| 1981 - Honda Civic | Manual | 4 |
- w/o A.C.
- Product Attributes:
- Top Width: .44
- Outside Circumference:
- 38.57
- 979.68
- Color: Black
- Banded Belt: N
- Standards: Sae J636, Sae J637
- Effective Length:
- 38
- 965.20
- Belt Construction: Bottom Cog
- Minimum Operating Temperature:
- -35
- -37.2
- Material: Synthetic Rubber Compound
- Maximum Operating Temperature:
- 175
- 79.4
This Part Fits the Following OEM/Substitute Numbers:
01978-02W0001, 021-903-137A, 1.268.698, 1.288.475.4, 1.706.710, 1.706.711.4, 10A0965, 11720-69900, 11720-F2700, 11720-H7201, 11720-N9520, 11721-69900, 1174922, 11A0965, 1237098, 13-381, 13381, 14025234...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1981 - Honda Accord | Alternator and Water Pump |
- Standard Grade Direct-Fit Catalytic Converter
- Magnaflow Standard Grade Direct-Fit Catalytic Converter
- Direct-Fit Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
- Product Attributes:
- Air Tube Count: 0
- Inlet Gasket Included: Yes
- Tube Material: Stainless Steel
- Outlet Gasket Included: Yes
- Grade Type: Regular
- Hangers Included: No
- Heat Shield Attached: No
- Outlet Mounting Hardware Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Spun
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Substrate Material: Ceramic
- Clamps Included: No
- Sensor Port Count: 0
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
-
Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 22633. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 1984-1985 Honda Accord and 1979-1987 Honda Prelude. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1981 - Honda Prelude | L | 1751 | 4 Cyl 1.8L | - |
- Standard Grade Direct-Fit Catalytic Converter
- Not legal for sale or installation in California, Colorado or New York.
- Magnaflow Standard Grade Direct-Fit Catalytic Converter
- Product Attributes:
- Air Tube Count: 0
- Inlet Gasket Included: Yes
- Tube Material: Stainless Steel
- Outlet Gasket Included: Yes
- Series: Standard Grade
- Grade Type: Regular
- Hangers Included: No
- Heat Shield Attached: No
- Outlet Mounting Hardware Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Spun
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Substrate Material: Ceramic
- Finish: Stainless Steel
- Clamps Included: No
- Prop 65 Y/N: No
- Sensor Port Count: 0
- Air Tube Adaptable: No
- Title: Magnaflow Standard Grade Federal / Epa Compliant Direct-fit Catalytic Converter 22633
- California Air Resources Board (CARB) Certified: No
-
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 22633. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 1984-1985 Honda Accord and 1979-1987 Honda Prelude. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1981 - Honda Prelude | L | 1751 | 4 Cyl 1.8L | - |
Showing 1 - 10 of 19 products
Loading...