Image
Product
Price
- Engine Oil Filter
- Engine Oil Filter
- Engine Oil Filter - FTF Engine Oil Filter
- Product Attributes:
- Gasket Inside Diameter: 57.0
- Gasket Outside Diameter: 65.0
- Bypass Relief Valve: Yes
- Filter Media Material: Paper
- Inside Thread Size:
- 0.79
- 0.80
- Anti-Drain Back Valve: Yes
- Working with various manufacturers, DENSO - already a global OEM leader in engine filtration components - continues to be an innovator and keeps DENSO ahead of the competition. First Time Fit Oil Filters are engineered to meet Denso's high quality standards delivering exemplary quality and performance. Quality assurance is guarenteed for Denso's First TIme Fit Oil Filters. You can be assured you're providing the best for your vehicle.
This Part Fits the Following OEM/Substitute Numbers:
0370-23-802, 0B631-14-302, 0B63114302, 15208 AA021, 15208 AA022, 15208 AA023, 15208 AA024, 15208 AA060, 15208 AA080, 15208 AA09A, 15208 AA100, 15208 AA12A, 15208 KA010, 15208 KA012, 15208-65F00, 15208-65F01, 15208-65F0A, 15208-65F0B...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 1982 - Mazda GLC |
- EZ-550 Helper Spring Kit
- Up to 550 lbs. load assist: without composit plastic leaf spring
- EZ-550 Helper Spring Kit for Various Truck Makes and Models. See Vehicle Fitment
- Hellwig's light-duty EZ-550 Helper Springs pack a lot of capability in every box. Packaged complete with the same heavy duty powder coated and plated components, hardware and installation instructions as our heavy duty helper spring products, these kits are designed for the vehicles that need lighter assistance in carrying a load. Simple bolt on design using common hand tools provide the installer ease of installation and the vehicle owner hassle free use. Ideally suited for light towing and loads, these units are fully adjustable using the heavy duty U-bolts included in the kit using simple hand tools. If your tow and haul needs change, simply adjust the heavy duty U-bolts to suit the new load requirements. Once installed and adjusted you are free to haul or tow with greater control and stability. Manufactured with heat treated ASTM 5160 alloy spring steel in our California based facility, these units are rated up to 500 lb. level load carrying capacity. They are a great cost effective spring solution and can be adjusted independently for uneven side to side loads.
Additional Fitment Information:
| Vehicle |
|---|
| 1982 - Mazda B2000 |
- High Capacity V-Belt (Standard)
- Product Attributes:
- Top Width: .47
- Belt Material: Epdm
- Notched: Yes
- Outside Circumference:
- 35.62
- 905
- Construction: Notched
- Cross Section Designation: Hc50
- Effective Length:
- 35
- 889
- Strand Quantity: 1
- Type: High Capacity V-belt (standard)
- Cord Material: Polyester
-
Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
- Gates Automotive XL V-Belt is a durable, long-lasting replacement V-belt designed for the most demanding engine drives. Due to thermal forces in the vehicle engine, this variable notched belt tightens on the drive as it heats up to prevent slippage, improve belt performance and reduce noise.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
000067524704, 0070186, 0110033, 0211787023, 0211787026, 027004127, 027004127Y, 027015078, 0303289, 0401353, 0407333, 04353, 069707829, 105807, 107038, 1104531, 1109614, 11378...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|---|
| 1982 - Mazda B2000 | L | 1970 | Automatic | Fan and Alternator | GAS | 4 Cyl 2.0L | - |
- High Capacity V-Belt (Standard)
- Product Attributes:
- Top Width: .47
- Belt Material: Epdm
- Notched: Yes
- Outside Circumference:
- 35.62
- 905
- Construction: Notched
- Cross Section Designation: Hc50
- Effective Length:
- 35
- 889
- Strand Quantity: 1
- Type: High Capacity V-belt (standard)
- Cord Material: Polyester
-
Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
- Gates Automotive XL V-Belt is a durable, long-lasting replacement V-belt designed for the most demanding engine drives. Due to thermal forces in the vehicle engine, this variable notched belt tightens on the drive as it heats up to prevent slippage, improve belt performance and reduce noise.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1982 - Mazda 626 | L | 1970 | Power Steering | GAS | 4 Cyl 2.0L | - |
- WIX Fuel (Complete In-Line) Filter
- Product Attributes:
- Inner Diameter Top: Closed
- Outer Diameter Top: 1.937
- Duty Type: Ld
- Micron: 20.00
- Media Material: Cellulose
- Class: B
- Outlet: 5/16
- Inlet: 5/16
- WIX Fuel Filters provide excellent engine protection for normal and severe driving conditions such as dirt roads, construction sites, stop and go traffic, short trips, and interstate travel. WIX filters are recommended for OEM fuel filter change intervals. WIX offers high quality, high efficiency media specific to the application and fuel type being used. Superior materials, design and construction ensure WIX fuel filters provide excellent performance under all types of operating conditions.
This Part Fits the Following OEM/Substitute Numbers:
0022832, 0430041, 05727894, 1014303C1, 1130000, 1130902, 1130903, 1130904, 1130905, 1131106, 1139803, 1139821, 1201556, 120678, 1227, 1304950, 16900MCH003, 18094H...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 1982 - Mazda 626 | L | 1970 | Canada | 4 Cyl 2.0L | - |
- Standard Grade Universal Catalytic Converter - 2.00in.
- Cutting and Welding Required
- Magnaflow Standard Grade Universal Catalytic Converter - 2.00in.
- Universal Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 3
- Body Height: 3
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Heat Shield Attached: No
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Spun
- Inlet Inside Diameter: 2
- Substrate Material: Metallic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2
- Sensor Port Count: 0
-
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 50004. The Universal design allows the part to fit a wide array of vehicles (cutting and welding required), and the stainless steel construction of this spun body catalytic converter is highly resistant to corrosion. The single laser fusion weld of the spun body greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1982 - Mazda 626 | L | 1970 | Front | 4 Cyl 2.0L | - |
Showing 1 - 6 of 6 products
Loading...