Image
Product
Price
- WIX Spin-On Lube Filter
- Original Equipment Part Number 15208-AA031 Also Available In Master Pack Version ; Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- Inner Diameter Top: Closed
- Outer Diameter Top: 3.15
- Burst Pressure: 280
- Duty Type: Ld
- Micron: 21.00
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: 8-11
- Flow Rate: 9-11 Gpm
- Media Material: Enhanced Cellulose
- Class: A
- Anti-Drain Back Valve: Yes
- Use Wix Premium For Severe Driving -Ideal match for synthetic and high mileage motor oils -Meets of exceeds OE recommended change intervals – up to 15,000 miles -Synthetic blended media provides 99% dirt trapping efficiency -Silicone anti-drainback valve prevents dry starts -Superior performance in stop and go and heavy traffic -Performs well for routine towing -High capacity – ideal for dirty and dusty environments -Long life, tight-fitting gasket -Solid metal end caps provide positive seal.
This Part Fits the Following OEM/Substitute Numbers:
8-97140-666-0, 0 451 103 275, 0 451 103 316, 0 986 452 006, 0 986 452 007, 0 986 452 016, 0 986 452 036, 0 986 452 059, 0 986 452 916, 0 986 AF0 047, 0 986 AF0 064, 0 986 AF1 038, 0 986 AF1 093, 0 986 AF1 181, 0 RF03 23 802, 0 RF03 23802A, 000.14.145, 0116331...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2017 - Subaru Outback | H | 3630 | Canada | 6 Cyl 3.6L | - |
- Front Lower Suspension Ball Joint
- MOOG K9513 Front Lower Suspension Ball Joint for Subaru Outback
- Product Attributes:
- Cotter Pin Hole: Yes
- Adjustable: No
- Mounting Hardware Included: Yes
- Maximum Outside Diameter: 1.630
- Mounting Hole Quantity: 0
- Mounting Type: Press-in
- Greaseable: No
- Material: Neoprene
- Part Description: Suspension Ball Joint
-
Features:
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2017 - Subaru Outback | Front Lower |
- Front Lower Suspension Ball Joint
- Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces
- MOOG K9513 Front Lower Suspension Ball Joint for Subaru Outback
- Product Attributes:
- Cotter Pin Hole: Yes
- Adjustable: No
- Mounting Hardware Included: Yes
- Maximum Outside Diameter: 1.630
- Mounting Hole Quantity: 0
- Mounting Type: Press-in
- Greaseable: No
- Material: Neoprene
- Part Description: Suspension Ball Joint
-
Features:
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
02-55001, 101-4105, 104141, 20206AJ000, 20206AN00A, 21067-GA050, 255001, 260-1402, 2601402, 32005903, 410-69062, 45D2183, 46D2183A, 505-1183, 505-1183B, 5051183B, 539-031, 610.47002...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2017 - Subaru Forester | Front Lower |
- TPMS Sensor - Clamp-In
- Supersession (ACES) Replaces 28291; 28300; 28305; 28335; 28345; 28355; 28360; 28365; 28370; 28380 Mounting Method: Clamp-in Torque: Nut torque = 71in-lbs, 8Nm; Valve core torque = 3.5 in-lbs, 0.4Nm Max Speed Rating: 130 Max Pressure Rating: 102 Frequency: 315.0 MHz Housing Material: Plastic With Mounting Hardware Pre-Programmed Not Programmable Valve Included Valve Cap Included Valve Core Material: Nickel Plated Valve Material: Aluminum Valve Color: Silver Valve Stem Not Included Washer Not Included Includes 1 TPMS sensor with nut Replaces ~28291~; ~28300~; ~28305~; ~28335~; ~28345~; ~28355~; ~28360~; ~28365~; ~28370~; ~28380~; ~28291~ Quantity Included: 1
- Product Attributes:
- Mounting Method: Clamp-in
- Mounting Hardware Included: Yes
- Frequency: 315.0
- Valve Core Material: Nickel Plated
- Programmable: Yes
- Valve Cap Included: Yes
- Valve Color: Silver
- Valve Material: Aluminum
-
Features:
- Premium quality TPMS sensors produced in Schrader’s secure and highly automated OE manufacturing facilities
- Ready out of the box
- 1 for 1 direct-fit OE replacement TPMS sensor services the specific make, model, and year
- Quick and easy installation that does not require programming
- OE fit, form and function validated and engineered by over 350 engineers dedicated to TPMS
- Schrader is the leading global manufacturer of tire pressure monitoring systems (TPMS), and its direct OE TPMS technology can be found in over 50% of vehicles globally. Matching OE quality and performance standards, Schrader sensors undergo extensive OE quality testing, including high speed and extreme temperature tests. Schrader’s global presence as the leading OE supplier means that OE quality and performance come standard with Schrader’s genuine OE replacement sensors. TPMS sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service. A vehicle-specific relearn procedure must be performed after the sensor is installed, requiring a TPMS programming and diagnostic tool with OBD capability.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
1203, 1204, 1205, 1206, 1218, 40005, 40037, 40050, 42607-02050, 42607-04010, 42607-06011, 42607-0C010, 42607-0C020, 42607-0E090, 42607-30030, 42607-33011, 42607-33021, 42607-35010...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2017 - Subaru BRZ |
- NGK Laser Iridium High Ignitability Spark Plug
- Gap 0.032" Actual OE Manufacturer; OE Spark Plug Is High Ignitability. For Optimal Performance, Replace With High Ignitability Spark Plugs. 60,000 mi OE Mfr Recommended Service Interval
- Laser Iridium High Ignitability Spark Plug
- Product Attributes:
- Center Electrode Design: Fine Wire
- Center Electrode Insulator Tip Projection:
- 0.16
- 4.0
- Washer Included: Yes
- Electrical Terminal Type: Non-removable Nut
- Grade Type: Performance
- Service Number: Dilkar7b8
- Washer Type: Crush
- Ground Electrode Tip Material: Platinum
- Short Style Spark Plug: No
- Skirt: No
- Center Electrode Core Material: Copper
- Part Number: Dilkar7b8
- Resistor Type: Yes
- Stock Number: 92217
- Ground Electrode Tip Design: Dual Fine Electrode (dfe) - High Ignitability
- Pre-Gap Size:
- .032
- 0.8
- Ground Electrode Core Material: Nickel
- Material Grade: Iridium Platinum
- Center Electrode Projection: Mid Projection
- Seat Type: Flat
- Ground Electrode Quantity: 1
- Insulator Material: Ceramic
- Hex Size: 14mm
- Reach:
- 1.043
- 26.5
- Center Electrode Tip Material: Iridium
- Skirt Length: 0.0
- Manufacturer Heat Range: 7
- Ground Configuration: J-gap
- Resistance: 5000.0
- Insulator Height:
- 2.01
- 51.0
- Thread Diameter:
- 0.472
- 12.0
-
Features:
- ACTUAL OE or EQUIVALENT HIGH IGNITABILITY DESIGN: DFE tip and iridium alloy center electrode produce the most advanced OE spark plug technology
- TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- RECOMMENDED USAGE: Best for vehicles with OE DFE iridium alloy plugs
- DFE DESIGN: Double fine electrode (platinum pin) provides more complete fuel burn, quicker throttle response, smoother idle and better cold starts
- IRIDIUM ALLOY CENTER ELECTRODE: Iridium's density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
- NGK Laser Iridium High Ignitability spark plugs offer the best combination of performance and longevity. Engineered specifically for OE applications, Laser Iridium High Ignitability spark plugs are tested to the highest standards to ensure quality and durability. Iridium tipped center electrode provides durability six times harder than platinum. NGKs high grade pure alumina ceramic and 98 percent pure copper core prevents the spark plug from overheating while providing reliable starts. Laser Iridium High Ignitability spark plugs feature raised platinum pad or platinum fine wire tip on the ground electrode for even wear in distributorless ignition systems and improved spark performance.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
92217
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2017 - Subaru Impreza | H | 1995 | 4 Cyl 2.0L | - |
- Multi-Purpose O-Ring
- FEL-PRO 35524 Multi-Purpose O-Ring for Subaru Outback
- Product Attributes:
- : O-ring
-
Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
- Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
This Part Fits the Following OEM/Substitute Numbers:
112251, 21236-AA000, 21236-AA010, 21236AA000, 21236AA010, 21236AA050, 21236AA100, 33661, 635493, 711110600, 74-0204, 740204, C31197, C31748, C31766, C32711, MD158570, MD170031...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2017 - Subaru Impreza | H | 1995 | 4 Cyl 2.0L | - |
- DENSO First Time Fit Tire Pressure Monitoring System (TPMS) Sensor
- 315 MHz, Clamp In, 35 in-lbs, 4 N.m OE Manufactured
- Designed Specifically for Your Vehicle, Restores all OE Features, OE Quality
- Tire Pressure Monitoring System (TPMS) Sensor - OE Manufactured
- Product Attributes:
- Gasket Or Seal Included: Yes
- Mounting Hardware Included: Yes
- DENSO's TPMS Sensors are designed specifically to work with your vehicle's TPMS System.Do-it-yourselfers: Although DENSO TPMS sensors are made for your specific make and model, you may need to visit your trusted repair shop to complete the sensor relearn process designed by your vehicle's manufacturer.Handle Systems that Can’t be Reverse Engineered (including High-Line and Analog).All Vehicle and System Functions are Preserved (including Fill Assist and Auto Locate).Preserve diagnostic trouble codes.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
28103CA000, 28103CA001, 28103CA002, 4260706020, 4260706060, 426070D010, 426070R010, 4260730060, 4260752020, SU00300754, SU00306090
Additional Fitment Information:
| Vehicle |
|---|
| 2017 - Subaru BRZ |
- ACT XACT Streetlite Clutch Flywheel
- XACT Flywheel Streetlite
- XACT Flywheel Streetlite
- Product Attributes:
- Friction Surface Diameter: 228
- Engine Balance: Internal
- Grade Type: Performance
- Mounting Hardware Included: No
- SFI Rating: 1.1
- Part Fitment Requirement: Pilot Bearing Pb1004 Included. Pressure Plate Bolts Included (m8-1.25 X 16mm).
- Prop 65 Long Label: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
- Friction Surface Configuration: Recessed
- Tooth Quantity: 124
- SFI: 1.1
- Replaceable Friction Surface: No
- Product Weight (lbs.):
- 12.8
- 13.7
- Weight: 12.8
-
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
- 600480 is a Streetlite flywheel, which is considerably lighter than stock and is the most durable flywheel offering from ACT. Materials are properly distributed for maximum strength, lower inertia, good heat tolerance and rigidity. ACT's Streetlite flywheels are preferred for street or drag racing. ACT flywheels are serviceable and can be resurfaced with no need to purchase additional parts.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Cylinder Head Type | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 2017 - Subaru BRZ | H | 1998 | Manual | DOHC | 4 Cyl 2.0L | Limited | 122 |
- ACT XACT Streetlite Clutch Flywheel
- Subaru has incorporated 240mm clutch components into production during mid-2018MY production starting with VIN J*806877. ACT clutch kits and flywheels are not compatible with the revised OEM components.
- XACT Flywheel Streetlite
- XACT Flywheel Streetlite
- Product Attributes:
- Friction Surface Diameter: 228
- Engine Balance: Internal
- Grade Type: Performance
- Mounting Hardware Included: No
- SFI Rating: 1.1
- Part Fitment Requirement: Pilot Bearing Pb1004 Included. Pressure Plate Bolts Included (m8-1.25 X 16mm).
- Prop 65 Long Label: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
- Friction Surface Configuration: Recessed
- Tooth Quantity: 124
- SFI: 1.1
- Replaceable Friction Surface: No
- Product Weight (lbs.):
- 12.8
- 13.7
- Weight: 12.8
-
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
- 600480 is a Streetlite flywheel, which is considerably lighter than stock and is the most durable flywheel offering from ACT. Materials are properly distributed for maximum strength, lower inertia, good heat tolerance and rigidity. ACT's Streetlite flywheels are preferred for street or drag racing. ACT flywheels are serviceable and can be resurfaced with no need to purchase additional parts.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Cylinder Head Type | Engine Designation | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|---|
| 2017 - Subaru WRX | H | 1998 | Manual | DOHC | FA20F | 4 Cyl 2.0L | Limited | 122 |
- ACT XACT Streetlite Clutch Flywheel
- Subaru has incorporated 240mm clutch components into production during mid-2018MY production starting with VIN J*806877. ACT clutch kits and flywheels are not compatible with the revised OEM components.
- XACT Flywheel Streetlite
- XACT Flywheel Streetlite
- Product Attributes:
- Friction Surface Diameter: 228
- Engine Balance: Internal
- Grade Type: Performance
- Mounting Hardware Included: No
- SFI Rating: 1.1
- Part Fitment Requirement: Pilot Bearing Pb1004 Included. Pressure Plate Bolts Included (m8-1.25 X 16mm).
- Prop 65 Long Label: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
- Friction Surface Configuration: Recessed
- Tooth Quantity: 124
- SFI: 1.1
- Replaceable Friction Surface: No
- Product Weight (lbs.):
- 12.8
- 13.7
- Weight: 12.8
-
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
- 600480 is a Streetlite flywheel, which is considerably lighter than stock and is the most durable flywheel offering from ACT. Materials are properly distributed for maximum strength, lower inertia, good heat tolerance and rigidity. ACT's Streetlite flywheels are preferred for street or drag racing. ACT flywheels are serviceable and can be resurfaced with no need to purchase additional parts.
This Part Fits the Following OEM/Substitute Numbers:
2-671-ST, FF502A, FW-021-SF, SU20A
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Cylinder Head Type | Engine Designation | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|---|
| 2017 - Subaru WRX | H | 1998 | Manual | DOHC | FA20F | 4 Cyl 2.0L | Sport | 122 |
Showing 1 - 10 of 24 products
Loading...