Image
Product
Price
- Oil Filter
- H-2.875 in.; OD-2.688 in.; M20x1.5 Thread; psi Relief Valve 11-17
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Item Weight: 0.600 Lbs. (0.2 Kg)
- Product Box Height: 3.630 In. (92mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.160 In. (80 Mm)
- Package Material: Paperboard
- Product Box Length: 3.160 In. (80mm)
- PSI Relief Valve: 11-17
- Removal Nut: Yes
- Item Height: 2.875 In. (73mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
1173228, 11930535150, 11930535151, 1321800010, 1520831UOB, 1520865F0C, 1520865F0E, 15208AA12A, 15208K010, 15400PFB004, 15400PFB014, 15400PJ7005, 15400PM3004, 15410MFJD01, 158332430, 1585332430, 1585399179, 1857444...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 1997 - INFINITI QX4 |
- NGK V-Power Spark Plug
- Gap 0.044"
- V-Power Spark Plug
- Product Attributes:
- Center Electrode Design: Standard
- Center Electrode Insulator Tip Projection:
- 0.12
- 3.0
- Washer Included: Yes
- Electrical Terminal Type: Non-removable Nut
- Grade Type: Standard Replacement
- Service Number: Bkr5e-11
- Washer Type: Crush
- Ground Electrode Tip Material: Nickel
- Short Style Spark Plug: No
- Skirt: No
- Center Electrode Core Material: Copper
- Part Number: Bkr5e-11
- Resistor Type: Yes
- Stock Number: 6953
- Ground Electrode Tip Design: Standard
- Pre-Gap Size:
- .044
- 1.1
- Ground Electrode Core Material: Nickel
- Material Grade: Nickel/copper
- Center Electrode Projection: Mid Projection
- Seat Type: Flat
- Ground Electrode Quantity: 1
- Insulator Material: Ceramic
- Hex Size: 5/8" (16mm)
- Reach:
- 0.750
- 19.0
- Center Electrode Tip Material: Nickel
- Skirt Length: 0.0
- Manufacturer Heat Range: 5
- Ground Configuration: J-gap
- Resistance: 5000.0
- Insulator Height:
- 1.99
- 50.5
- Thread Diameter:
- 0.551
- 14.0
-
Features:
- NGK's OE CERAMIC TECHNOLOGY: High grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance
- TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
- RECOMMENDED USAGE: Best for vehicles with OE nickel alloy plugs, not recommended on vehicles with factory precious metal plugs
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
- ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction nickel alloy center electrode with V-groove provides consistent performance
- NGK V-Power spark plugs offer reliable performance and improved ignitability over standard nickel plugs. Engineered specifically for OE applications, the special V-cut nickel alloy center electrode and concave ground electrode of NGK's V-Power spark plug increases ignitability providing quicker starts and smoother idle. NGK's legendary high grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance. Trivalent metal plating ensures superior anti-corrosion and anti-seizing properties.
-
Suggested Purchase Quantity: 6
- Most jobs typically require 6 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
0000-18-BP01, 09482-00566, 12599-6771-6, 1765234, 1835270T, 1844168T, 1P09-18-110, 1Y09, 21025103, 22401 55Y15, 22401-50Y05, 2240150Y05, 2240155Y75, 22401KA210, 2430, 2FR3LS6, 3130, 3924...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1997 - INFINITI J30 | V | 2960 | 6 Cyl 3.0L | 181 |
- NGK V-Power Spark Plug
- Gap 0.044"
- V-Power Spark Plug
- Product Attributes:
- Center Electrode Design: Standard
- Center Electrode Insulator Tip Projection:
- 0.12
- 3.0
- Washer Included: Yes
- Electrical Terminal Type: Non-removable Nut
- Grade Type: Standard Replacement
- Service Number: Bkr5e-11
- Washer Type: Crush
- Ground Electrode Tip Material: Nickel
- Short Style Spark Plug: No
- Skirt: No
- Center Electrode Core Material: Copper
- Part Number: Bkr5e-11
- Resistor Type: Yes
- Stock Number: 6953
- Ground Electrode Tip Design: Standard
- Pre-Gap Size:
- .044
- 1.1
- Ground Electrode Core Material: Nickel
- Material Grade: Nickel/copper
- Center Electrode Projection: Mid Projection
- Seat Type: Flat
- Ground Electrode Quantity: 1
- Insulator Material: Ceramic
- Hex Size: 5/8" (16mm)
- Reach:
- 0.750
- 19.0
- Center Electrode Tip Material: Nickel
- Skirt Length: 0.0
- Manufacturer Heat Range: 5
- Ground Configuration: J-gap
- Resistance: 5000.0
- Insulator Height:
- 1.99
- 50.5
- Thread Diameter:
- 0.551
- 14.0
-
Features:
- NGK's OE CERAMIC TECHNOLOGY: High grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance
- TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
- RECOMMENDED USAGE: Best for vehicles with OE nickel alloy plugs, not recommended on vehicles with factory precious metal plugs
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
- ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction nickel alloy center electrode with V-groove provides consistent performance
- NGK V-Power spark plugs offer reliable performance and improved ignitability over standard nickel plugs. Engineered specifically for OE applications, the special V-cut nickel alloy center electrode and concave ground electrode of NGK's V-Power spark plug increases ignitability providing quicker starts and smoother idle. NGK's legendary high grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance. Trivalent metal plating ensures superior anti-corrosion and anti-seizing properties.
-
Suggested Purchase Quantity: 6
- Most jobs typically require 6 of this item.
- This item must be purchased in quantities of 4
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1997 - INFINITI Q45 | V | 4130 | 8 Cyl 4.1L | - |
- NGK V-Power Spark Plug
- Gap 0.044" Actual OE Manufacturer 30,000 mi OE Mfr Recommended Service Interval
- V-Power Spark Plug
- Product Attributes:
- Center Electrode Design: Standard
- Center Electrode Insulator Tip Projection:
- 0.12
- 3.0
- Washer Included: Yes
- Electrical Terminal Type: Non-removable Nut
- Grade Type: Standard Replacement
- Service Number: Bkr5e-11
- Washer Type: Crush
- Ground Electrode Tip Material: Nickel
- Short Style Spark Plug: No
- Skirt: No
- Center Electrode Core Material: Copper
- Part Number: Bkr5e-11
- Resistor Type: Yes
- Stock Number: 6953
- Ground Electrode Tip Design: Standard
- Pre-Gap Size:
- .044
- 1.1
- Ground Electrode Core Material: Nickel
- Material Grade: Nickel/copper
- Center Electrode Projection: Mid Projection
- Seat Type: Flat
- Ground Electrode Quantity: 1
- Insulator Material: Ceramic
- Hex Size: 5/8" (16mm)
- Reach:
- 0.750
- 19.0
- Center Electrode Tip Material: Nickel
- Skirt Length: 0.0
- Manufacturer Heat Range: 5
- Ground Configuration: J-gap
- Resistance: 5000.0
- Insulator Height:
- 1.99
- 50.5
- Thread Diameter:
- 0.551
- 14.0
-
Features:
- NGK's OE CERAMIC TECHNOLOGY: High grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance
- TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
- RECOMMENDED USAGE: Best for vehicles with OE nickel alloy plugs, not recommended on vehicles with factory precious metal plugs
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
- ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction nickel alloy center electrode with V-groove provides consistent performance
- NGK V-Power spark plugs offer reliable performance and improved ignitability over standard nickel plugs. Engineered specifically for OE applications, the special V-cut nickel alloy center electrode and concave ground electrode of NGK's V-Power spark plug increases ignitability providing quicker starts and smoother idle. NGK's legendary high grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance. Trivalent metal plating ensures superior anti-corrosion and anti-seizing properties.
-
Suggested Purchase Quantity: 6
- Most jobs typically require 6 of this item.
- This item must be purchased in quantities of 4
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1997 - INFINITI QX4 | V | 3275 | 6 Cyl 3.3L | - |
- Relief pressure 16 lb
- Standard
This Part Fits the Following OEM/Substitute Numbers:
10233, 10233ST, 12R8, 1350A730, 1640162090, 1678-29300, 17167, 1793282Z00, 214301P111, 253301P000, 253303K000, 253303Z000, 253304H000, 4495805, 45137AE003, 45137AE00B, 45137AE01A, 7516...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1997 - INFINITI Q45 | V | 4130 | 8 Cyl 4.1L | - |
- Electric Fuel Pump
- Product Attributes:
- Connector Gender: Female
- Voltage: 12.0
- Negative Ground: No
- Grade Type: Premium
- Mounting Hardware Included: Yes
- Fuel Type: Gas
- Connector Shape: Rectangle
- Minimum Pressure: 43
- Seal And Lock Ring Included: No
- Outlet Quantity: 1
- Maximum Amperage Draw: 6.0
- Inlet Outside Diameter: 11.0
- Average Flow Rating: 26.0
- Wire Quantity: 0
- Average Current Draw: 6.0
- Maximum Pressure: 94.0
- Fuel Sending Unit Included: No
- Pump Design: Turbine
- Outlet Outside Diameter:
- 0.313
- 7.9
- Terminal Quantity: 2
- Gasket Or Seal Included: No
- Wiring Harness Included: No
- Position(s): In-tank
- Terminal Type: Pin
- Terminal Gender: Male
- Regulator Included: No
- Internal Or External: Internal
- Strainer Included: No
- Delphi is a Tier 1 supplier to the majority of global vehicle manufacturers and has been a manufacturer of dependable fuel pumps and fuel delivery parts for over 80 years. With over 30 OE-proprietary innovations and 150 patents in fuel technologies, Delphi is regarded as a market leader in North American fuel management with sales coverage at over 95%. Learn more about our expert-led training programs and tech hotline at 1-877-463-3574. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.
This Part Fits the Following OEM/Substitute Numbers:
0K01A13350B, 0K01D-13-35Z, 0K24C-13-35ZA, 0K24T-13-35ZA, 0K29T-13-35ZA, 15100-50G00, 15100-50G10, 15100-54830, 15100-58B00, 15100-58B01, 15100-58B10, 15100-60G00, 15100-60G20, 15100-60G21, 15100-61A1V, 15100-61AA1, 15100-65D02, 15100-65D12...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1997 - INFINITI QX4 | V | 3275 | In-Tank | 6 Cyl 3.3L | - |
- 20" TRICO View Wiper Blade
- OE Design this is a 20'' 9 x 3 Hook Conventional Wiper Blade
- 9mm Hook, 9x4 Hook, 1/4" Side Lock
- TRICO View Wiper Blade
- Product Attributes:
- Salability Restrictions: N
- Number of Wiping Edges: 1
- Blade Material: Natural Rubber
- Frame Material: Steel
- AAP_UDA_4: 110
- Pressure Point Quantity: 6
- Contains Electronic Components: No
- Engine Specific: N
- AAP_UDA_129: N
- Frame Color: Black
- AAP_UDA_125: N
- AAP_UDA_126: N
- AAP_UDA_127: N
- Is Item A Chemical: No
- Blade Type: Conventional
- Adapter Type: Pre-attached Adapter
- Adapters Required: Yes
- Snowmobile: N
- Personal Watercraft: N
- Winter Blade: No
- Is Or Contains A Battery: No
- Variable Speed: No
- Shipping Exclusions: N
- ASIN Child: B00j676pny
- High Performance: Y
- Attached Spoiler/Aerofoil: No
- AAP_UDA_132: N
- California Proposition 65 Warning Type: N/a
- AAP_UDA_133: N
- Is Or Contains A Bulb: No
- Adapters Included: Yes
- Motorcycle ATV: N
- Non-Vehicle Specific: N
- AAP_UDA_130: Y
- AAP_UDA_131: N
- Wiper Blade Connection Type: 1/4 Side Lock, 7mm Hook, 8mm Hook, 9x3 Hook, 9x4 Hook
- AAP_UDA_119: Y
- Transmission Specific: N
- Refillable: Yes
- Small Engine: N
-
Features:
- Pre-attached universal adaptor fits most arm types directly
- Available in lengths from 11" to 28
- Engineered for better wrap on today's highly curved windshields
- Conventional Wiper Blade
- Precision-cut rubber edge creates superior wiping action
- Aerodynamic steel frame provides exceptional strength and durability
- TRICO View Wiper Blade feature an aerodynamic steel frame that delivers exceptional strength and durability and is engineered to provide a better wrap on today's highly curved windshields. The pre-attached universal adaptor fits 9mm hook, 9x4 hook, side lock and bayonet arms.
This Part Fits the Following OEM/Substitute Numbers:
1002737089, 36-201C, WW-2001-WT
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1997 - INFINITI Q45 | Front Right |
- 9004;Extreme Brightness;Turbo Fan Cooling
- EXTREME BRIGHTNESSIf you?re looking for the brightest monster of all it is our Xtreme series LED headlight bulb. The Xtreme Series can produce 5x the light output of stock halogen bulbs and is brighter than a 35W HID system.
- Product Attributes:
- Power Consumption: 45 Watt
- Light Output: 10,000 Lumen Per Kit
- IP Rating: Ip65
- Amp Draw per Bulb: 3.0 Amps @ 13v Dc
- Color Temperature: 6,500 Kelvin
- Operating Voltage: 9-16 Dc Voltage
- Prop 65 (C, R or CR): Cr
-
Features:
- Powerful 10,000 lumens output produces stunning illumination that beats the 35W HID system
- Precision optics designed for long range visibility with zero glare
- Patented VacPipe cooling integrated heat sink allows for plug & play installation as easy as replacing a stock bulb
- SmartDrive technology with built-in Advanced Temperature Regulation provides dependable operation at full intensity
- Temperature Regulation provides dependable operation at full intensity
- Bulb collar rotates 360degree for optimal beam pattern
- Durable and shock resistant build for all weather driving
- Automotive grade LED chips paired with advanced cooling technology make the Xtreme Series the brightest LED headlight bulbs on the market. Produces a stunning output that's brighter than a 35W HID system and 5x brighter than a stock halogen bulb. Bulky fan cooling LED bulbs have become history. The Xtreme Series is designed to be compact enough to fit in the tightest spaces.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1997 - INFINITI QX4 | High Beam and Low Beam |
- FRAM, CA4309, Air Filter
- Flexible Panel Air Filter
- Extra Guard
- Product Attributes:
- Reusable: No
- Gasket Or Seal Included: No
- Shape: Rectangular
- Flexible or Rigid: Flexible
- Grade Type: Regular
- Replacable Filter: Yes
- Grade: Advanced
- Meets Or Exceeds Original Equipment Manufacturer Specifications: Yes
- Washable: No
- Filter Media Material: Cellulose
-
Features:
- Keep your engine running smoothly by preventing damaging particles from entering your vehicle’s engine
- Ensures maximum airflow to prevent engine wear
- Installs quickly in as little as 5 minutes
- Protects up to 12 months or 12,000 miles (19,000 kilometers)
- FRAM Extra Guard® engine air filters are engineered to protect your engine from harmful contaminants. Replacing an air filter with FRAM Extra Guard can help improve horsepower, acceleration, and engine performance. To prevent engine wear, FRAM recommends changing your air filter every 12 months.
This Part Fits the Following OEM/Substitute Numbers:
11-01962, 11-02514, 110-0517, 110-1906, 143-2057, 16546-0Z000, 16546-70J10, 16546-AA020, 16546-AA080, 16546-V0100, 16546-V0110, 25043775, 2509216, 26116, 274, 2750, 30019, 32 00 5786...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1997 - INFINITI QX4 | V | 3275 | 6 Cyl 3.3L | - |
- 21" TRICO Ice Extreme Winter Weather Blade
- Upgrade Option from Conventional Blade to Beam Blade this is a 21'' 9 x 3 Hook Beam Wiper Blade
- 9mm Hook, 9x4 Hook, Side Pin (22mm), Side Pin (17mm), Pinch Tab, Push Button (22mm), Push Button (19mm)
- TRICO Ice Wiper Blade
- Product Attributes:
- Salability Restrictions: N
- Blade Material: Natural Rubber Blend
- AAP_UDA_121: Y
- AAP_UDA_4: 110
- AAP_UDA_122: Y
- AAP_UDA_123: N
- Engine Specific: N
- AAP_UDA_124: N
- ASIN Parent: B076f4v7q2
- AAP_UDA_120: Y
- AAP_UDA_129: N
- Frame Color: Black
- AAP_UDA_125: N
- AAP_UDA_126: N
- AAP_UDA_127: N
- AAP_UDA_128: N
- Adapter Type: Swift One-click
- AAP_UDA_33: 10227888
- Adapters Required: Yes
- Snowmobile: N
- AAP_UDA_32: Tri
- AAP_UDA_31: 326
- Shipping Exclusions: N
- High Performance: Y
- Is Or Contains A Bulb: No
- Adapters Included: Yes
- Non-Vehicle Specific: N
- Aggric Equipment: N
- Wiper Blade Connection Type: 7mm Hook, 8mm Hook, 9x3 Hook, 9x4 Hook, Pinch Tab, Pinch Tab Button, Push Button (19mm), Push Button (22mm), Side Pin (17mm), Side Pin (22mm)
- AAP_UDA_119: Y
- Transmission Specific: N
- Refillable: No
- Small Engine: N
- AAP_UDA_22: 1
- Wiper Element Formulation: High-strength Rubber
- Number of Wiping Edges: 1
- Frame Material: Plastic/steel Blend
- Pressure Point Quantity: Infinite
- Contains Electronic Components: No
- Marine: N
- Is Item A Chemical: No
- Blade Type: Beam
- AAP_UDA_12: Ea
- Car or Light Truck: Y
- Personal Watercraft: N
- Winter Blade: Yes
- Is Or Contains A Battery: No
- Variable Speed: No
- ASIN Child: B009m08ure
- Attached Spoiler/Aerofoil: No
- AAP_UDA_132: N
- California Proposition 65 Warning Type: N/a
- AAP_UDA_133: N
- Motorcycle ATV: N
- AAP_UDA_130: Y
- AAP_UDA_131: N
- Industrial Off Highway Equip: N
-
Features:
- Robust, heavy-gauge wiper element resists tearing in sub-zero temperatures
- One-piece, flexible design snugly conforms to most windshields
- Extreme Weather Blade
- Ruggedly constructed armor seals blade structure from elements
- SWIFT Universal, One-Click Connection system for quick installation
- TRICO Ice is a rugged and durable winter wiper blade designed specifically to combat severe weather and still offer optimal performance. Flexible beam blade design coupled with synthetic-blended armor for an infinitely flexible blade that can see you through even the worst driving conditions.
This Part Fits the Following OEM/Substitute Numbers:
19304556, 21SD, 35-210, 35210, 58-210WW, 8-3321, SB-21, SB211, WX-21-OE, WX-21-UB
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1997 - INFINITI QX4 | Front Right |
Showing 1 - 10 of 85 products
Loading...