Image
Product
Price
- Oil Filter
- H-2.875 in.; OD-2.688 in.; M20x1.5 Thread; psi Relief Valve 11-17
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Item Weight: 0.600 Lbs. (0.2 Kg)
- Product Box Height: 3.630 In. (92mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.160 In. (80 Mm)
- Package Material: Paperboard
- Product Box Length: 3.160 In. (80mm)
- PSI Relief Valve: 11-17
- Removal Nut: Yes
- Item Height: 2.875 In. (73mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
1173228, 11930535150, 11930535151, 1321800010, 1520831UOB, 1520865F0C, 1520865F0E, 15208AA12A, 15208K010, 15400PFB004, 15400PFB014, 15400PJ7005, 15400PM3004, 15410MFJD01, 158332430, 1585332430, 1585399179, 1857444...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2000 - Mitsubishi Mirage |
- NGK V-Power Spark Plug
- Gap 0.044"
- V-Power Spark Plug
- Product Attributes:
- Center Electrode Design: Standard
- Center Electrode Insulator Tip Projection:
- 0.12
- 3.0
- Washer Included: Yes
- Electrical Terminal Type: Non-removable Nut
- Grade Type: Standard Replacement
- Service Number: Bkr5e-11
- Washer Type: Crush
- Ground Electrode Tip Material: Nickel
- Short Style Spark Plug: No
- Skirt: No
- Center Electrode Core Material: Copper
- Part Number: Bkr5e-11
- Resistor Type: Yes
- Stock Number: 6953
- Ground Electrode Tip Design: Standard
- Pre-Gap Size:
- .044
- 1.1
- Ground Electrode Core Material: Nickel
- Material Grade: Nickel/copper
- Center Electrode Projection: Mid Projection
- Seat Type: Flat
- Ground Electrode Quantity: 1
- Insulator Material: Ceramic
- Hex Size: 5/8" (16mm)
- Reach:
- 0.750
- 19.0
- Center Electrode Tip Material: Nickel
- Skirt Length: 0.0
- Manufacturer Heat Range: 5
- Ground Configuration: J-gap
- Resistance: 5000.0
- Insulator Height:
- 1.99
- 50.5
- Thread Diameter:
- 0.551
- 14.0
-
Features:
- NGK's OE CERAMIC TECHNOLOGY: High grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance
- TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
- RECOMMENDED USAGE: Best for vehicles with OE nickel alloy plugs, not recommended on vehicles with factory precious metal plugs
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
- ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction nickel alloy center electrode with V-groove provides consistent performance
- NGK V-Power spark plugs offer reliable performance and improved ignitability over standard nickel plugs. Engineered specifically for OE applications, the special V-cut nickel alloy center electrode and concave ground electrode of NGK's V-Power spark plug increases ignitability providing quicker starts and smoother idle. NGK's legendary high grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance. Trivalent metal plating ensures superior anti-corrosion and anti-seizing properties.
-
Suggested Purchase Quantity: 6
- Most jobs typically require 6 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
0000-18-BP01, 09482-00566, 12599-6771-6, 1765234, 1835270T, 1844168T, 1P09-18-110, 1Y09, 21025103, 22401 55Y15, 22401-50Y05, 2240150Y05, 2240155Y75, 22401KA210, 2430, 2FR3LS6, 3130, 3924...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2000 - Mitsubishi Montero | V | 3497 | 6 Cyl 3.5L | 215 |
- NGK V-Power Spark Plug
- Gap 0.044" Actual OE Manufacturer 30,000 mi OE Mfr Recommended Service Interval
- V-Power Spark Plug
- Product Attributes:
- Center Electrode Design: Standard
- Center Electrode Insulator Tip Projection:
- 0.12
- 3.0
- Washer Included: Yes
- Electrical Terminal Type: Non-removable Nut
- Grade Type: Standard Replacement
- Service Number: Bkr5e-11
- Washer Type: Crush
- Ground Electrode Tip Material: Nickel
- Short Style Spark Plug: No
- Skirt: No
- Center Electrode Core Material: Copper
- Part Number: Bkr5e-11
- Resistor Type: Yes
- Stock Number: 6953
- Ground Electrode Tip Design: Standard
- Pre-Gap Size:
- .044
- 1.1
- Ground Electrode Core Material: Nickel
- Material Grade: Nickel/copper
- Center Electrode Projection: Mid Projection
- Seat Type: Flat
- Ground Electrode Quantity: 1
- Insulator Material: Ceramic
- Hex Size: 5/8" (16mm)
- Reach:
- 0.750
- 19.0
- Center Electrode Tip Material: Nickel
- Skirt Length: 0.0
- Manufacturer Heat Range: 5
- Ground Configuration: J-gap
- Resistance: 5000.0
- Insulator Height:
- 1.99
- 50.5
- Thread Diameter:
- 0.551
- 14.0
-
Features:
- NGK's OE CERAMIC TECHNOLOGY: High grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance
- TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
- RECOMMENDED USAGE: Best for vehicles with OE nickel alloy plugs, not recommended on vehicles with factory precious metal plugs
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
- ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction nickel alloy center electrode with V-groove provides consistent performance
- NGK V-Power spark plugs offer reliable performance and improved ignitability over standard nickel plugs. Engineered specifically for OE applications, the special V-cut nickel alloy center electrode and concave ground electrode of NGK's V-Power spark plug increases ignitability providing quicker starts and smoother idle. NGK's legendary high grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance. Trivalent metal plating ensures superior anti-corrosion and anti-seizing properties.
-
Suggested Purchase Quantity: 6
- Most jobs typically require 6 of this item.
- This item must be purchased in quantities of 4
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2000 - Mitsubishi Galant | L | 2351 | 4 Cyl 2.4L | - |
- Champion Copper Plus- Boxed - RC10YC4
- Gap 0.044in; Plug Type RC10YC4
- Champion Copper Plus 346 Spark Plug (Carton of 4)
- Copper Plus
- Product Attributes:
- Hex Size:
- 0.625
- 15.880
- Reach: 0.75
- Center Electrode Tip Material: Nickel
- Seat Type: Flat
- Electrical Terminal Type: Non-removable Nut
- Pre-Gap Size:
- 0.041
- 1.05
- Classification: Champion Copper Plus
- Ground Electrode Core Material: Nickel
- Insulator Height: 0.06
- Plug Type: Rc10yc4
- Hex Size:
- Dependable performance. This Champion® spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
7956, FR6AP10, FR7DCX, PFR5N11, RC10YC4
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2000 - Mitsubishi Galant | V | 2972 | 6 Cyl 3.0L | 181 |
- A/C Receiver Drier
- DENSO is the OE supplier for this vehicle; OE-specified O-rings included.
- A/C Receiver Drier
- A/C Receiver Drier - New
- Product Attributes:
- Material: Plastic
- While often overlooked in regular vehicle service, accumulators and receiver-driers play an important role in A/C operation. These components manage the flow of liquid and vapor refrigerant through the system, assuring maximum output and smooth, surge-free operation. DENSO’s accumulators and receiver-driers also contain powerful desiccant packages to isolate harmful moisture from the system, protecting the internal components from corrosion, which can wear systems prematurely from the inside out and create costly leaks. When major A/C service is performed, replacement of the accumulator or receiver-drier is often recommended by leading service authorities. Like all its First Time Fit® components, DENSO’s accumulators and receiver-driers are manufactured to the most stringent factory standards to provide new-car performance and efficiency.
This Part Fits the Following OEM/Substitute Numbers:
445910-0420, 4781500, 7812A125, 88474-08010, 88474-08030, 88474-17010, 88474-22010, 88474-47010, 88474-47020, 88474-50020
Additional Fitment Information:
| Vehicle |
|---|
| 2000 - Mitsubishi Eclipse |
- Product Attributes:
- Cross Section: K-section
- Rib Profile: Straight Rib
- Standards: Sae J1459, Sae J2432
- Effective Length:
- 1130.30
- 44.50
- Rib Quantity: 5
- Maximum Operating Temperature:
- 100
- 212
- Top Width: .68
- Outside Circumference:
- 1147.07
- 45.16
- Color: Black
- Rib Depth: Standard
- Minimum Operating Temperature:
- -42.7
- -45
- Material: Epdm, Aramid Reinforced
This Part Fits the Following OEM/Substitute Numbers:
079.903.137AB, 07L.903.137E, 10223911, 25-050446, 25212-39800, 4050445, 445K5, 5K446, 5PK1130, K050446, MD199223, MN155728
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2000 - Mitsubishi Montero Sport | V | 2972 | Fan, Alternator and Idler | 6 Cyl 3.0L | 181 |
- Electric Fuel Pump
- DENSO OE Replacement Fuel Pump
- Electric Fuel Pump
- Electric Fuel Pump - New
- Product Attributes:
- Outlet Quantity: 1
- Gasket Or Seal Included: No
- Negative Ground: Yes
- Mounting Hardware Included: Yes
- Inlet Outside Diameter: 11.000
- Regulator Included: No
- Internal Or External: Internal
- Strainer Included: No
- Seal And Lock Ring Included: No
- Electric Fuel Pump
This Part Fits the Following OEM/Substitute Numbers:
0K01B-13-350C, 0K24C-13-35ZA, 0K24T-13-35ZA, 0K29T-13-35ZA, 15100-50G00, 15100-50G10, 15100-52D1V, 15100-57B2V, 15100-58B01, 15100-60G21, 15100-61A1V, 15100-65811, 15100-65D02, 15100-65D12, 15100-65D22, 15100-65D70, 15100-77E00, 15100-80C1V...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2000 - Mitsubishi Montero Sport |
- Electric Fuel Pump
- DENSO OE Replacement Fuel Pump
- Electric Fuel Pump
- Electric Fuel Pump - New
- Product Attributes:
- Outlet Quantity: 1
- Gasket Or Seal Included: No
- Negative Ground: Yes
- Mounting Hardware Included: Yes
- Inlet Outside Diameter: 11.000
- Regulator Included: No
- Internal Or External: Internal
- Strainer Included: No
- Seal And Lock Ring Included: No
- Electric Fuel Pump
This Part Fits the Following OEM/Substitute Numbers:
17042-5Y700, 1760 A049, 1760A041, 1760A049, 1760A177, 1760A294, 1F21-13-350C, 1W1Z 9H307-BG, 2C2Z 9H307-AB, 2C6Z 9H307-AB, 2L2Z 9H307-HD, 31110-26330, 31110-26355DS, 31110-26500DS, 31110-26510, 31110-26755DS, 31123-25000, 3C2Z 9H307-AB...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2000 - Mitsubishi Galant |
- Electric Fuel Pump
- DENSO Fuel Pump
- Electric Fuel Pump
- Electric Fuel Pump - New
- Product Attributes:
- Outlet Quantity: 1
- Gasket Or Seal Included: No
- Negative Ground: Yes
- Mounting Hardware Included: Yes
- Inlet Outside Diameter: 11.000
- Regulator Included: No
- Internal Or External: Internal
- Strainer Included: No
- Seal And Lock Ring Included: No
- Electric Fuel Pump
Additional Fitment Information:
| Vehicle |
|---|
| 2000 - Mitsubishi Eclipse |
- Electric Fuel Pump
- Product Attributes:
- Connector Gender: Female
- Voltage: 12.0
- Negative Ground: No
- Grade Type: Premium
- Mounting Hardware Included: Yes
- Fuel Type: Gas
- Connector Shape: Rectangle
- Minimum Pressure: 43
- Seal And Lock Ring Included: No
- Outlet Quantity: 1
- Maximum Amperage Draw: 6.0
- Inlet Outside Diameter: 11.0
- Average Flow Rating: 26.0
- Wire Quantity: 0
- Average Current Draw: 6.0
- Maximum Pressure: 94.0
- Fuel Sending Unit Included: No
- Pump Design: Turbine
- Outlet Outside Diameter:
- 0.313
- 7.9
- Terminal Quantity: 2
- Gasket Or Seal Included: No
- Wiring Harness Included: No
- Position(s): In-tank
- Terminal Type: Pin
- Terminal Gender: Male
- Regulator Included: No
- Internal Or External: Internal
- Strainer Included: No
- Delphi is a Tier 1 supplier to the majority of global vehicle manufacturers and has been a manufacturer of dependable fuel pumps and fuel delivery parts for over 80 years. With over 30 OE-proprietary innovations and 150 patents in fuel technologies, Delphi is regarded as a market leader in North American fuel management with sales coverage at over 95%. Learn more about our expert-led training programs and tech hotline at 1-877-463-3574. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.
This Part Fits the Following OEM/Substitute Numbers:
0K01A13350B, 0K01D-13-35Z, 0K24C-13-35ZA, 0K24T-13-35ZA, 0K29T-13-35ZA, 15100-50G00, 15100-50G10, 15100-54830, 15100-58B00, 15100-58B01, 15100-58B10, 15100-60G00, 15100-60G20, 15100-60G21, 15100-61A1V, 15100-61AA1, 15100-65D02, 15100-65D12...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2000 - Mitsubishi Mirage | L | 1834 | In-Tank | 4 Cyl 1.8L | 112 |
Showing 1 - 10 of 54 products
Loading...