Image
Product
Price
- Oil Filter
- H-2.875 in.; OD-2.688 in.; M20x1.5 Thread; psi Relief Valve 11-17
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Item Weight: 0.600 Lbs. (0.2 Kg)
- Product Box Height: 3.630 In. (92mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.160 In. (80 Mm)
- Package Material: Paperboard
- Product Box Length: 3.160 In. (80mm)
- PSI Relief Valve: 11-17
- Removal Nut: Yes
- Item Height: 2.875 In. (73mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
Additional Fitment Information:
| Vehicle |
|---|
| 2007 - Mitsubishi Endeavor |
- Oil Filter
- H-2.875 in.; OD-2.688 in.; M20x1.5 Thread; psi Relief Valve 11-17 Premium Oil Filter w/Wrench Off Nut
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Item Weight: 0.600 Lbs. (0.2 Kg)
- Product Box Height: 3.630 In. (92mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.160 In. (80 Mm)
- Package Material: Paperboard
- Product Box Length: 3.160 In. (80mm)
- PSI Relief Valve: 11-17
- Removal Nut: Yes
- Item Height: 2.875 In. (73mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
1173228, 11930535150, 11930535151, 1321800010, 1520831UOB, 1520865F0C, 1520865F0E, 15208AA12A, 15208K010, 15400PFB004, 15400PFB014, 15400PJ7005, 15400PM3004, 15410MFJD01, 158332430, 1585332430, 1585399179, 1857444...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2007 - Mitsubishi Outlander | V | 2998 | 6 Cyl 3.0L | 182 |
- NGK V-Power Spark Plug
- Gap 0.044" Actual OE Manufacturer 30,000 mi OE Mfr Recommended Service Interval
- V-Power Spark Plug
- Product Attributes:
- Center Electrode Design: Standard
- Center Electrode Insulator Tip Projection:
- 0.12
- 3.0
- Washer Included: Yes
- Electrical Terminal Type: Non-removable Nut
- Grade Type: Standard Replacement
- Service Number: Bkr5e-11
- Washer Type: Crush
- Ground Electrode Tip Material: Nickel
- Short Style Spark Plug: No
- Skirt: No
- Center Electrode Core Material: Copper
- Part Number: Bkr5e-11
- Resistor Type: Yes
- Stock Number: 6953
- Ground Electrode Tip Design: Standard
- Pre-Gap Size:
- .044
- 1.1
- Ground Electrode Core Material: Nickel
- Material Grade: Nickel/copper
- Center Electrode Projection: Mid Projection
- Seat Type: Flat
- Ground Electrode Quantity: 1
- Insulator Material: Ceramic
- Hex Size: 5/8" (16mm)
- Reach:
- 0.750
- 19.0
- Center Electrode Tip Material: Nickel
- Skirt Length: 0.0
- Manufacturer Heat Range: 5
- Ground Configuration: J-gap
- Resistance: 5000.0
- Insulator Height:
- 1.99
- 50.5
- Thread Diameter:
- 0.551
- 14.0
-
Features:
- NGK's OE CERAMIC TECHNOLOGY: High grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance
- TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
- RECOMMENDED USAGE: Best for vehicles with OE nickel alloy plugs, not recommended on vehicles with factory precious metal plugs
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
- ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction nickel alloy center electrode with V-groove provides consistent performance
- NGK V-Power spark plugs offer reliable performance and improved ignitability over standard nickel plugs. Engineered specifically for OE applications, the special V-cut nickel alloy center electrode and concave ground electrode of NGK's V-Power spark plug increases ignitability providing quicker starts and smoother idle. NGK's legendary high grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance. Trivalent metal plating ensures superior anti-corrosion and anti-seizing properties.
-
Suggested Purchase Quantity: 6
- Most jobs typically require 6 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
0000-18-BP01, 09482-00566, 12599-6771-6, 1765234, 1835270T, 1844168T, 1P09-18-110, 1Y09, 21025103, 22401 55Y15, 22401-50Y05, 2240150Y05, 2240155Y75, 22401KA210, 2430, 2FR3LS6, 3130, 3924...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2007 - Mitsubishi Lancer | L | 1999 | 4 Cyl 2.0L | 122 |
- Product Attributes:
- Cross Section: K-section
- Rib Profile: Straight Rib
- Standards: Sae J1459, Sae J2432
- Effective Length:
- 2225.04
- 87.60
- Rib Quantity: 6
- Maximum Operating Temperature:
- 100
- 212
- Top Width: .82
- Outside Circumference:
- 2239.27
- 88.16
- Color: Black
- Rib Depth: Standard
- Minimum Operating Temperature:
- -42.7
- -45
- Material: Epdm, Aramid Reinforced
This Part Fits the Following OEM/Substitute Numbers:
00602-17620-330, 04854221, 053032125AD, 053032380, 053032380AC, 12564760, 12569351, 12576454, 12590807, 12637203, 12637352, 1387692, 1625689, 1S7Q-6C301-AB, 24507814, 25-060874, 25-060875, 25-060876...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2007 - Mitsubishi Raider | V | - | Main Drive | 8 Cyl 4.7L | 287 |
- Champion Copper Plus- Boxed - RC10YC4
- Gap 0.044in; Plug Type RC10YC4
- Champion Copper Plus 346 Spark Plug (Carton of 4)
- Copper Plus
- Product Attributes:
- Hex Size:
- 0.625
- 15.880
- Reach: 0.75
- Center Electrode Tip Material: Nickel
- Seat Type: Flat
- Electrical Terminal Type: Non-removable Nut
- Pre-Gap Size:
- 0.041
- 1.05
- Classification: Champion Copper Plus
- Ground Electrode Core Material: Nickel
- Insulator Height: 0.06
- Plug Type: Rc10yc4
- Hex Size:
- Dependable performance. This Champion® spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
7956, FR6AP10, FR7DCX, PFR5N11, RC10YC4
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2007 - Mitsubishi Galant | V | 3828 | 6 Cyl 3.8L | 230 |
- NGK G-Power Platinum Spark Plug
- Gap 0.044"
- G-Power Spark Plug
- Product Attributes:
- Center Electrode Design: Fine Wire
- Center Electrode Insulator Tip Projection:
- 0.20
- 5.0
- Washer Included: Yes
- Electrical Terminal Type: Non-removable Nut
- Grade Type: Standard Replacement
- Service Number: Zfr6fgp
- Washer Type: Crush
- Ground Electrode Tip Material: Nickel
- Short Style Spark Plug: No
- Skirt: No
- Center Electrode Core Material: Copper
- Part Number: Zfr6fgp
- Resistor Type: Yes
- Stock Number: 7100
- Ground Electrode Tip Design: Trapezoid
- Pre-Gap Size:
- .040
- 1.0
- Ground Electrode Core Material: Nickel
- Material Grade: Platinum
- Center Electrode Projection: Long Projection
- Seat Type: Flat
- Ground Electrode Quantity: 1
- Insulator Material: Ceramic
- Hex Size: 5/8" (16mm)
- Reach:
- 0.750
- 19.0
- Center Electrode Tip Material: Platinum
- Skirt Length: 0.0
- Manufacturer Heat Range: 6
- Ground Configuration: J-gap
- Resistance: 5000.0
- Insulator Height:
- 1.99
- 50.5
- Thread Diameter:
- 0.551
- 14.0
-
Features:
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- RECOMMENDED USAGE: Lower cost alternative to double precious metal spark plugs or as an upgrade to OE nickel alloy spark plugs
- SINGLE PLATINUM TIP: Fine wire 0.6 millimeter platinum tip center electrode ensures improved durability and a consistently stable spark
- TRAPEZOIDAL CUT GROUND ELECTRODE: Reduces quenching design produces improved ignitability and performance
- PLATINUM ALLOY: G-Power platinum provides exceptional value with increased performance and longer service intervals than factory nickel plugs
- COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
- NGK G-Power Platinum spark plugs are the best single platinum spark plugs at an economical price. G-Power plugs feature a fine wire platinum center electrode and a trapezoidal cut ground electrode that offers increased durability, improved fuel efficiency, lower emissions, faster starts and quicker acceleration over conventional nickel spark plugs. An excellent upgrade for vehicles which used nickel alloy spark plugs originally. For better performance consider upgrading to a NGK Iridium IX plug. For even greater performance consider upgrading to a NGK RUTHENIUM HX plug.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
18, 3318, 3436, 4428, 6719, 6721, 6725, 7100, AP5224, AP5405, AP5405DP2, FGR8LQP0, FR7LPP30X, RC12LC4, RC12PMC4
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2007 - Mitsubishi Raider | V | - | 6 Cyl 3.7L | 226 |
- Front Lower Suspension Ball Joint
- Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces Fits OE Arm and Aftermarket Arms with Maximum Press-Fit Diameter of 1.571 (in) Original Equipment (OE) Presses In From Below Requires Replacement Joint To Be Pressed In From Above Arm
- MOOG K500063 Front Lower Suspension Ball Joint for Jeep Patriot
- Product Attributes:
- Cotter Pin Hole: No
- Adjustable: No
- Mounting Hardware Included: No
- Suspension Grade Type: Standard
- Mounting Hole Quantity: 0
- Mounting Type: Press-in
- Greaseable: Yes
- Material: Neoprene
- Part Description: Suspension Ball Joint
-
Features:
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
104500063, 1601724, 260-1724, 2601724, 410-288442, 45D2401, 46D2401A, 505-1417, 505-1417B, 5105040AA, 5105040AB, 5105040AC, 5105040AD, 5105040AE, 5105040AF, 5105040AG, 5105040AH, 5105040AI...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2007 - Mitsubishi Lancer | Front Lower |
- Front Lower Suspension Ball Joint
- Fits OE Arm and Aftermarket Arms with Maximum Press-Fit Diameter of 1.571 (in)
- MOOG K500063 Front Lower Suspension Ball Joint for Jeep Patriot
- Product Attributes:
- Cotter Pin Hole: No
- Adjustable: No
- Mounting Hardware Included: No
- Suspension Grade Type: Standard
- Mounting Hole Quantity: 0
- Mounting Type: Press-in
- Greaseable: Yes
- Material: Neoprene
- Part Description: Suspension Ball Joint
-
Features:
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2007 - Mitsubishi Lancer | Front Lower |
- Electric Fuel Pump
- DENSO OE Replacement Fuel Pump
- Electric Fuel Pump
- Electric Fuel Pump - New
- Product Attributes:
- Outlet Quantity: 1
- Gasket Or Seal Included: No
- Negative Ground: Yes
- Mounting Hardware Included: Yes
- Inlet Outside Diameter: 11.000
- Regulator Included: No
- Internal Or External: Internal
- Strainer Included: No
- Seal And Lock Ring Included: No
- Electric Fuel Pump
This Part Fits the Following OEM/Substitute Numbers:
0K01B-13-350C, 0K24C-13-35ZA, 0K24T-13-35ZA, 0K29T-13-35ZA, 15100-50G00, 15100-50G10, 15100-52D1V, 15100-57B2V, 15100-58B01, 15100-60G21, 15100-61A1V, 15100-65811, 15100-65D02, 15100-65D12, 15100-65D22, 15100-65D70, 15100-77E00, 15100-80C1V...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2007 - Mitsubishi Galant |
- Electric Fuel Pump
- DENSO OE Replacement Fuel Pump
- Electric Fuel Pump
- Electric Fuel Pump - New
- Product Attributes:
- Outlet Quantity: 1
- Gasket Or Seal Included: No
- Negative Ground: Yes
- Mounting Hardware Included: Yes
- Inlet Outside Diameter: 11.000
- Regulator Included: No
- Internal Or External: Internal
- Strainer Included: No
- Seal And Lock Ring Included: No
- Electric Fuel Pump
This Part Fits the Following OEM/Substitute Numbers:
17042-5Y700, 1760 A049, 1760A041, 1760A049, 1760A177, 1760A294, 1F21-13-350C, 1W1Z 9H307-BG, 2C2Z 9H307-AB, 2C6Z 9H307-AB, 2L2Z 9H307-HD, 31110-26330, 31110-26355DS, 31110-26500DS, 31110-26510, 31110-26755DS, 31123-25000, 3C2Z 9H307-AB...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2007 - Mitsubishi Galant |
Showing 1 - 10 of 135 products
Loading...