Image
Product
Price
- SHOCKS
- 0"-2" FOX 2.0 PERFORMANCE SERIES FRONT COIL OVERS COILOVERS ARE ADJUSTABLE PRESET MAY VARY. PLEASE REFER TO FOX INSTRUCTION MANUAL FOR PROPER ADJUSTMENT STOCK HEIGHT FOR MODELS WITH FACTORY LIFT MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES
- MAXTRAC SUSPENSION'S PART# 872725FC IS A PAIR OF FOX 2.0 PERFORMANCE SERIES COIL OVER (ALUMINUM BODY)(0"-2" LIFT HEIGHT)
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 2019 - Ram 1500 | RWD |
- Replaces OE Part Number(s) 68111002AA, 68232449AA, 68232449AB, 68232449AC Single Steering Damper with OEM Steering Damper Mounts
- RS5000
This Part Fits the Following OEM/Substitute Numbers:
5154661AC, 68111002AA, 68232449AA, 68232449AB, 68232449AC
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2019 - Ram 3500 | Front |
- Raises Front 2 (in) - 3 (in) Up to 35x12.50 (in) Tire with Minor Fender Trimming Requires Aftermarket Front Upper Control Arms 0 (mm) Offset Aftermarket Wheels Recommended
- ICON 2.5 Series coilovers are an incredible upgrade for the front of 2019-2023 Ram 1500 trucks. ICON’s Vehicle-specific valving provides a sport tuned feel while 2-3” of lift allows the use of larger, more aggressive wheel and tire combos.
- 19-23 RAM 1500 2-3" 2.5 VS IR COILOVER KIT
- Product Attributes:
- AAP_UDA_22: 1
- Cylinder Color: Silver
- Grade Type: Performance
- Active or Passive Suspension: Passive
- Self-Leveling: No
- Adjustable Compression: No
- AAP_UDA_4: 55
- Damping Type: Oil
- Maximum Lift: 3
- Adjustable Damping: No
- Adjustable: No
- Adjustable Rebound: No
- Material:
- Aluminum
- Steel
- Service Parts:
- 252010 - 2.5 Ifp Rebuild Kit
- 257301 - 7/8 Shaft 10.25 Oal, 6.00 Travel
- Shaft Diameter: 0.875
- AAP_UDA_12: Ea
- Dust Shield: No
- Cylinder Finish: Cadmium Plated
- Recommended Aftermarket Tires: 35" X 12.50" (fender Trimming And Modifications Will Be Required.)
- Upper Mount Type: Mounting Plate
- Coil Over Springs Included: Yes
- Recommended Aftermarket Wheels:
- Icon Alloys - 18x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys - 20x9" W/ 5” Backspace / 0mm Offset
- Body Diameter: 2.5
- Gas Charged: Yes
- Cylinder Material: Steel
- Internal Construction Type: Single Tube
- Spring Rate Type: Linear
- California Prop 65 Warning: Yes
- Boot Included: No
- Lower Mount Type: Clevis
- Shock Absorber Rod End Measuring Point: Center Of Clevis Holes
- Adjustable Height: Yes
- Valving Type: Digressive
- Dust Shield Included: No
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Spring Material: Steel
- OEM Wheels & Tires Fitment: Yes
- Remote Reservoir: No
-
Features:
- Increased wheel travel and ride quality over stock
- 100% Bolt-on - no drilling, cutting or welding necessary for installation
- Unique valving developed for the lighter weight and chassis dynamics of the 2019-2023 Ram 1500
- Vehicle specific tuned for superior shock damping and control
- Adjustable from 2-3" of front lift height over stock
- ICON engineered coil springs
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated shock body with 7/8" diameter shaft
- High strength alloy CNC machined lower mounting clevis
- FK rod end bearings for extended longevity and minimal deflection
- ICON Vehicle Dynamics V.S. 2.5 Series coilover shocks are an incredible upgrade for the front end of 2019-2023 Ram 1500 trucks. ICON’s Vehicle-specific valving provides a sport tuned feel on and off-road while 2-3” of lift height adjustability allows the use of larger, more aggressive wheel and tire combinations. The larger 2.5” shock body and increased piston area over stock components and application specific length to maximize wheel travel provide improved damping ability and outstanding ride characteristics across varying types of terrain. When paired with ICON 2.0 Aluminum Series or 2.5 Series rear shocks vehicle control will be balanced front to rear, resulting in the best overall driving experience for your Ram 1500 truck.
Additional Fitment Information:
| Vehicle | Position | Front Spring | Sub Model |
|---|---|---|---|
| 2019 - Ram 1500 | Front | Coil | Tradesman |
- 19-23 RAM 1500 2-3" 2.5 VS RR COILOVER KIT
- Requires Aftermarket Front Upper Control Arms Raises Front 1.25 (in) - 2.25 (in)
- ICON 2.5 Series coilovers are an incredible upgrade for the front of 2019-2023 Ram 1500 trucks. ICON’s Vehicle-specific valving provides a sport tuned feel while 2-3” of lift allows the use of larger, more aggressive wheel and tire combos.
- 19-UP RAM 1500 2-3" 2.5 VS RR COILOVER KIT
- Product Attributes:
- AAP_UDA_22: 1
- Cylinder Color: Silver
- Grade Type: Performance
- Active or Passive Suspension: Passive
- Self-Leveling: No
- Adjustable Compression: No
- AAP_UDA_4: 55
- Damping Type: Oil
- Maximum Lift: 3
- Adjustable Damping: No
- Adjustable: No
- Adjustable Rebound: No
- Material:
- Aluminum
- Steel
- Service Parts:
- 252011 - 2.5 Piggyback/remote Resi/bypass Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 254101g - 1/2 Gallon Icon Performance Shock Oil
- 257301 - 7/8 Shaft 10.25 Oal, 6.00 Travel
- Shaft Diameter: 0.875
- AAP_UDA_12: Ea
- Dust Shield: No
- Cylinder Finish: Cadmium Plated
- Recommended Aftermarket Tires: 35" X 12.50" (fender Trimming And Modifications Will Be Required.)
- Upper Mount Type: Mounting Plate
- Coil Over Springs Included: Yes
- Recommended Aftermarket Wheels:
- Icon Alloys - 18x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys - 20x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys | 18x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys | 20x9" W/ 5” Backspace / 0mm Offset
- Body Diameter:
- 2,5
- 2.5
- Gas Charged: Yes
- Cylinder Material: Steel
- Internal Construction Type: Single Tube
- Spring Rate Type: Linear
- California Prop 65 Warning: Yes
- Boot Included: No
- Lower Mount Type: Clevis
- Shock Absorber Rod End Measuring Point: Center Of Clevis Holes
- Adjustable Height: Yes
- Valving Type: Digressive
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Spring Material: Steel
- OEM Wheels & Tires Fitment: Yes
- Remote Reservoir: Yes
-
Features:
- Increased wheel travel and ride quality over stock
- FK rod end bearings for extended longevity and minimal deflection
- 100% Bolt-on - no drilling, cutting or welding necessary for installation
- Unique valving developed for the lighter weight and chassis dynamics of the 2019-2023 Ram 1500
- Vehicle specific tuned for superior shock damping and control
- Adjustable from 2-3" of front lift height over stock
- Remote reservoirs maintain cooler operating temperatures and consistent operation during extended off-road use
- ICON engineered coil springs
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated shock body with 7/8" diameter shaft
- High strength alloy CNC machined lower mounting clevis
- ICON Vehicle Dynamics V.S. 2.5 Series coilover shocks are an incredible upgrade for the front end of 2019-2023 Ram 1500 trucks. ICON’s Vehicle-specific valving provides a sport tuned feel on and off-road while 2-3” of lift height adjustability allows the use of larger, more aggressive wheel and tire combinations. The larger 2.5” shock body and increased piston area over stock components and application specific length to maximize wheel travel provide improved damping ability and outstanding ride characteristics across varying types of terrain. These remote reservoir coilovers will maintain lower operating temperatures and offer more consistent operation during extended or aggressive off-road use compared to internal reservoir versions. When paired with ICON 2.0 Aluminum Series or 2.5 Aluminum Series rear shocks vehicle control will be balanced front to rear, resulting in the best overall driving experience for your Ram 1500 truck.
Additional Fitment Information:
| Vehicle | Position | Front Spring | Sub Model |
|---|---|---|---|
| 2019 - Ram 1500 | Front | Coil | Rebel |
- Raises Front 2 (in) - 3 (in) Up to 35x12.50 (in) Tire with Minor Fender Trimming Requires Aftermarket Front Upper Control Arms 0 (mm) Offset Aftermarket Wheels Recommended
- ICON 2.5 Series coilovers are an incredible upgrade for the front of 2019-2023 Ram 1500 trucks. ICON’s Vehicle-specific valving provides a sport tuned feel while 2-3” of lift allows the use of larger, more aggressive wheel and tire combos.
- 19-23 RAM 1500 2-3" 2.5 VS RR COILOVER KIT
- Product Attributes:
- AAP_UDA_22: 1
- Cylinder Color: Silver
- Grade Type: Performance
- Active or Passive Suspension: Passive
- Self-Leveling: No
- Adjustable Compression: No
- AAP_UDA_4: 55
- Damping Type: Oil
- Maximum Lift: 3
- Adjustable Damping: No
- Adjustable: No
- Adjustable Rebound: No
- Material:
- Aluminum
- Steel
- Service Parts:
- 252011 - 2.5 Piggyback/remote Resi/bypass Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 254101g - 1/2 Gallon Icon Performance Shock Oil
- 257301 - 7/8 Shaft 10.25 Oal, 6.00 Travel
- Shaft Diameter: 0.875
- AAP_UDA_12: Ea
- Dust Shield: No
- Cylinder Finish: Cadmium Plated
- Recommended Aftermarket Tires: 35" X 12.50" (fender Trimming And Modifications Will Be Required.)
- Upper Mount Type: Mounting Plate
- Coil Over Springs Included: Yes
- Recommended Aftermarket Wheels:
- Icon Alloys - 18x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys - 20x9" W/ 5” Backspace / 0mm Offset
- Body Diameter: 2.5
- Gas Charged: Yes
- Cylinder Material: Steel
- Internal Construction Type: Single Tube
- Spring Rate Type: Linear
- California Prop 65 Warning: Yes
- Boot Included: No
- Lower Mount Type: Clevis
- Shock Absorber Rod End Measuring Point: Center Of Clevis Holes
- Adjustable Height: Yes
- Valving Type: Digressive
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Spring Material: Steel
- OEM Wheels & Tires Fitment: Yes
- Remote Reservoir: Yes
-
Features:
- Increased wheel travel and ride quality over stock
- FK rod end bearings for extended longevity and minimal deflection
- 100% Bolt-on - no drilling, cutting or welding necessary for installation
- Unique valving developed for the lighter weight and chassis dynamics of the 2019-2023 Ram 1500
- Vehicle specific tuned for superior shock damping and control
- Adjustable from 2-3" of front lift height over stock
- Remote reservoirs maintain cooler operating temperatures and consistent operation during extended off-road use
- ICON engineered coil springs
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated shock body with 7/8" diameter shaft
- High strength alloy CNC machined lower mounting clevis
- ICON Vehicle Dynamics V.S. 2.5 Series coilover shocks are an incredible upgrade for the front end of 2019-2023 Ram 1500 trucks. ICON’s Vehicle-specific valving provides a sport tuned feel on and off-road while 2-3” of lift height adjustability allows the use of larger, more aggressive wheel and tire combinations. The larger 2.5” shock body and increased piston area over stock components and application specific length to maximize wheel travel provide improved damping ability and outstanding ride characteristics across varying types of terrain. These remote reservoir coilovers will maintain lower operating temperatures and offer more consistent operation during extended or aggressive off-road use compared to internal reservoir versions. When paired with ICON 2.0 Aluminum Series or 2.5 Aluminum Series rear shocks vehicle control will be balanced front to rear, resulting in the best overall driving experience for your Ram 1500 truck.
Additional Fitment Information:
| Vehicle | Position | Front Spring | Sub Model |
|---|---|---|---|
| 2019 - Ram 1500 | Front | Coil | Sport |
- 19-23 RAM 1500 2-3" 2.5 VS CDCV COILOVER KIT
- Requires Aftermarket Front Upper Control Arms Raises Front 2 (in) - 3 (in)
- ICON 2.5 Series coilovers are an incredible upgrade for the front of 2019-2023 Ram 1500 trucks. ICON’s Vehicle-specific valving provides a sport tuned feel while 2-3” of lift allows the use of larger, more aggressive wheel and tire combos.
- 19-UP RAM 1500 2-3" 2.5 VS CDCV COILOVER KIT
- Product Attributes:
- AAP_UDA_22: 1
- Cylinder Color: Silver
- Grade Type: Performance
- Active or Passive Suspension: Passive
- Self-Leveling: No
- Adjustable Compression: Yes
- AAP_UDA_4: 55
- Damping Type: Oil
- Maximum Lift: 3
- Adjustable Damping: Yes
- Adjustable: Yes
- Adjustable Rebound: No
- Material:
- Aluminum
- Steel
- Service Parts:
- 252011 - 2.5 Piggyback/remote Resi/bypass Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 254101g - 1/2 Gallon Icon Performance Shock Oil
- 257301 - 7/8 Shaft 10.25 Oal, 6.00 Travel
- Shaft Diameter: 0.875
- AAP_UDA_12: Ea
- Dust Shield: No
- Cylinder Finish: Cadmium Plated
- Recommended Aftermarket Tires: 35" X 12.50" (fender Trimming And Modifications Will Be Required.)
- Upper Mount Type: Mounting Plate
- Coil Over Springs Included: Yes
- Recommended Aftermarket Wheels:
- Icon Alloys - 18x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys - 20x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys | 18x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys | 20x9" W/ 5” Backspace / 0mm Offset
- Body Diameter:
- 2,5
- 2.5
- Gas Charged: Yes
- Cylinder Material: Steel
- Internal Construction Type: Single Tube
- Spring Rate Type: Linear
- California Prop 65 Warning: Yes
- Damping Adjustment Type: Manual
- Boot Included: No
- Lower Mount Type: Clevis
- Shock Absorber Rod End Measuring Point: Center Of Clevis Holes
- Adjustable Height: Yes
- Valving Type: Digressive
- Dust Shield Included: No
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Spring Material: Steel
- OEM Wheels & Tires Fitment: Yes
- Remote Reservoir: Yes
-
Features:
- Increased wheel travel and ride quality over stock
- ICON engineered coil springs
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated shock body with 7/8" diameter shaft
- High strength alloy CNC machined lower mounting clevis
- FK rod end bearings for extended longevity and minimal deflection
- 100% Bolt-on - no drilling, cutting or welding necessary for installation
- Unique valving developed for the lighter weight and chassis dynamics of the 2019-2023 Ram 1500
- Vehicle specific tuned for superior shock damping and control
- Adjustable from 2-3" of front lift height over stock
- Remote reservoirs maintain cooler operating temperatures and consistent operation during extended off-road use
- ICON CDCV equipped for external tuneability of your shocks
- ICON Vehicle Dynamics V.S. 2.5 Series coilover shocks are an incredible upgrade for the front end of 2019-2023 Ram 1500 trucks. ICON’s Vehicle-specific valving provides a sport tuned feel on and off-road while 2-3” of lift height adjustability allows the use of larger, more aggressive wheel and tire combinations. The larger 2.5” shock body and increased piston area over stock components and application specific length to maximize wheel travel provide improved damping ability and outstanding ride characteristics across varying types of terrain. These remote reservoir coilovers will maintain lower operating temperatures and offer more consistent operation during extended or aggressive off-road use compared to internal reservoir versions. The ICON CDC Valve upgrade is included for those desiring an easy way to tune the ride externally with 10 settings of compression damping adjustment, from soft to hard. When paired with ICON 2.0 Aluminum Series or 2.5 Aluminum Series rear shocks vehicle control will be balanced front to rear, resulting in the best overall driving experience for your Ram 1500 truck.
Additional Fitment Information:
| Vehicle | Position | Front Spring | Fuel Type | Sub Model |
|---|---|---|---|---|
| 2019 - Ram 1500 | Front | Coil | GAS | Laramie Longhorn |
- 19-23 RAM 1500 2-3" 2.5 VS CDCV COILOVER KIT
- Requires Aftermarket Front Upper Control Arms Raises Front 1.25 (in) - 2.25 (in)
- ICON 2.5 Series coilovers are an incredible upgrade for the front of 2019-2023 Ram 1500 trucks. ICON’s Vehicle-specific valving provides a sport tuned feel while 2-3” of lift allows the use of larger, more aggressive wheel and tire combos.
- 19-UP RAM 1500 2-3" 2.5 VS CDCV COILOVER KIT
- Product Attributes:
- AAP_UDA_22: 1
- Cylinder Color: Silver
- Grade Type: Performance
- Active or Passive Suspension: Passive
- Self-Leveling: No
- Adjustable Compression: Yes
- AAP_UDA_4: 55
- Damping Type: Oil
- Maximum Lift: 3
- Adjustable Damping: Yes
- Adjustable: Yes
- Adjustable Rebound: No
- Material:
- Aluminum
- Steel
- Service Parts:
- 252011 - 2.5 Piggyback/remote Resi/bypass Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 254101g - 1/2 Gallon Icon Performance Shock Oil
- 257301 - 7/8 Shaft 10.25 Oal, 6.00 Travel
- Shaft Diameter: 0.875
- AAP_UDA_12: Ea
- Dust Shield: No
- Cylinder Finish: Cadmium Plated
- Recommended Aftermarket Tires: 35" X 12.50" (fender Trimming And Modifications Will Be Required.)
- Upper Mount Type: Mounting Plate
- Coil Over Springs Included: Yes
- Recommended Aftermarket Wheels:
- Icon Alloys - 18x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys - 20x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys | 18x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys | 20x9" W/ 5” Backspace / 0mm Offset
- Body Diameter:
- 2,5
- 2.5
- Gas Charged: Yes
- Cylinder Material: Steel
- Internal Construction Type: Single Tube
- Spring Rate Type: Linear
- California Prop 65 Warning: Yes
- Damping Adjustment Type: Manual
- Boot Included: No
- Lower Mount Type: Clevis
- Shock Absorber Rod End Measuring Point: Center Of Clevis Holes
- Adjustable Height: Yes
- Valving Type: Digressive
- Dust Shield Included: No
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Spring Material: Steel
- OEM Wheels & Tires Fitment: Yes
- Remote Reservoir: Yes
-
Features:
- Increased wheel travel and ride quality over stock
- ICON engineered coil springs
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated shock body with 7/8" diameter shaft
- High strength alloy CNC machined lower mounting clevis
- FK rod end bearings for extended longevity and minimal deflection
- 100% Bolt-on - no drilling, cutting or welding necessary for installation
- Unique valving developed for the lighter weight and chassis dynamics of the 2019-2023 Ram 1500
- Vehicle specific tuned for superior shock damping and control
- Adjustable from 2-3" of front lift height over stock
- Remote reservoirs maintain cooler operating temperatures and consistent operation during extended off-road use
- ICON CDCV equipped for external tuneability of your shocks
- ICON Vehicle Dynamics V.S. 2.5 Series coilover shocks are an incredible upgrade for the front end of 2019-2023 Ram 1500 trucks. ICON’s Vehicle-specific valving provides a sport tuned feel on and off-road while 2-3” of lift height adjustability allows the use of larger, more aggressive wheel and tire combinations. The larger 2.5” shock body and increased piston area over stock components and application specific length to maximize wheel travel provide improved damping ability and outstanding ride characteristics across varying types of terrain. These remote reservoir coilovers will maintain lower operating temperatures and offer more consistent operation during extended or aggressive off-road use compared to internal reservoir versions. The ICON CDC Valve upgrade is included for those desiring an easy way to tune the ride externally with 10 settings of compression damping adjustment, from soft to hard. When paired with ICON 2.0 Aluminum Series or 2.5 Aluminum Series rear shocks vehicle control will be balanced front to rear, resulting in the best overall driving experience for your Ram 1500 truck.
Additional Fitment Information:
| Vehicle | Position | Front Spring | Fuel Type | Sub Model |
|---|---|---|---|---|
| 2019 - Ram 1500 | Front | Coil | GAS | Rebel |
- Raises Front 2 (in) - 3 (in) Up to 35x12.50 (in) Tire with Minor Fender Trimming Requires Aftermarket Front Upper Control Arms 0 (mm) Offset Aftermarket Wheels Recommended
- ICON 2.5 Series coilovers are an incredible upgrade for the front of 2019-2023 Ram 1500 trucks. ICON’s Vehicle-specific valving provides a sport tuned feel while 2-3” of lift allows the use of larger, more aggressive wheel and tire combos.
- 19-23 RAM 1500 2-3" 2.5 VS CDCV COILOVER KIT
- Product Attributes:
- AAP_UDA_22: 1
- Cylinder Color: Silver
- Grade Type: Performance
- Active or Passive Suspension: Passive
- Self-Leveling: No
- Adjustable Compression: Yes
- AAP_UDA_4: 55
- Damping Type: Oil
- Maximum Lift: 3
- Adjustable Damping: Yes
- Adjustable: Yes
- Adjustable Rebound: No
- Material:
- Aluminum
- Steel
- Service Parts:
- 252011 - 2.5 Piggyback/remote Resi/bypass Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 254101g - 1/2 Gallon Icon Performance Shock Oil
- 257301 - 7/8 Shaft 10.25 Oal, 6.00 Travel
- Shaft Diameter: 0.875
- AAP_UDA_12: Ea
- Dust Shield: No
- Cylinder Finish: Cadmium Plated
- Recommended Aftermarket Tires: 35" X 12.50" (fender Trimming And Modifications Will Be Required.)
- Upper Mount Type: Mounting Plate
- Coil Over Springs Included: Yes
- Recommended Aftermarket Wheels:
- Icon Alloys - 18x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys - 20x9" W/ 5” Backspace / 0mm Offset
- Body Diameter: 2.5
- Gas Charged: Yes
- Cylinder Material: Steel
- Internal Construction Type: Single Tube
- Spring Rate Type: Linear
- California Prop 65 Warning: Yes
- Damping Adjustment Type: Manual
- Boot Included: No
- Lower Mount Type: Clevis
- Shock Absorber Rod End Measuring Point: Center Of Clevis Holes
- Adjustable Height: Yes
- Valving Type: Digressive
- Dust Shield Included: No
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Spring Material: Steel
- OEM Wheels & Tires Fitment: Yes
- Remote Reservoir: Yes
-
Features:
- Increased wheel travel and ride quality over stock
- ICON engineered coil springs
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated shock body with 7/8" diameter shaft
- High strength alloy CNC machined lower mounting clevis
- FK rod end bearings for extended longevity and minimal deflection
- 100% Bolt-on - no drilling, cutting or welding necessary for installation
- Unique valving developed for the lighter weight and chassis dynamics of the 2019-2023 Ram 1500
- Vehicle specific tuned for superior shock damping and control
- Adjustable from 2-3" of front lift height over stock
- Remote reservoirs maintain cooler operating temperatures and consistent operation during extended off-road use
- ICON CDCV equipped for external tuneability of your shocks
- ICON Vehicle Dynamics V.S. 2.5 Series coilover shocks are an incredible upgrade for the front end of 2019-2023 Ram 1500 trucks. ICON’s Vehicle-specific valving provides a sport tuned feel on and off-road while 2-3” of lift height adjustability allows the use of larger, more aggressive wheel and tire combinations. The larger 2.5” shock body and increased piston area over stock components and application specific length to maximize wheel travel provide improved damping ability and outstanding ride characteristics across varying types of terrain. These remote reservoir coilovers will maintain lower operating temperatures and offer more consistent operation during extended or aggressive off-road use compared to internal reservoir versions. The ICON CDC Valve upgrade is included for those desiring an easy way to tune the ride externally with 10 settings of compression damping adjustment, from soft to hard. When paired with ICON 2.0 Aluminum Series or 2.5 Aluminum Series rear shocks vehicle control will be balanced front to rear, resulting in the best overall driving experience for your Ram 1500 truck.
Additional Fitment Information:
| Vehicle | Position | Front Spring | Sub Model |
|---|---|---|---|
| 2019 - Ram 1500 | Front | Coil | Sport |
- EIB Pro-Truck Lift Kits
- Eibach 19-23 Ram 1500 Rebel Crew Cab Pro-Truck Lift Kit System Coilover Stage 2R
- Pair of Front Coilovers + Rear Reservoir Shocks + Rear Springs
- Product Attributes:
- Reservoir rear shocks: Yes
-
Features:
- Stage 2 system featuring Pro-Truck-Coilover 2.0's + Pro-Truck Reservoir Sport Shocks + Pro-Lift-Kit Springs
- Height Adjustable Front Coilover and External Reservoir Rear Shocks for Increased Off-Road Performance
- Anodized 6061-T6 Billet Aluminum Coilover Mounts, 46mm Piston, Monotube Design with Nitrogen Filled Variable Force Valving.
- Individually Dyno Tested for Matched Performance and Reliability. Heavy Duty Bushing System also Cycle Tested.
- Engineered, Tested and Manufactured by Eibach in the U.S.A.
- Height Adjustable Front Coilover and External Reservoir Rear Shocks for Increased Off-Road Performance
Additional Fitment Information:
| Vehicle | Sub Model | Body |
|---|---|---|
| 2019 - Ram 1500 | Rebel | Crew Cab Pickup |
- Use Up To 33 (in) x 11.50 (in) Tires Raises Front .75 (in) - 2.5 (in) ; Recommended Aftermarket Wheel Size: 17x8.5" with 5.75” Backspace / 25mm Offset
- These ICON coilovers feature 2.5 Series shocks and coil springs optimized for this application. The shock’s larger 2.5” body and increased piston area improves damping ability and ride quality across varying types of terrain.
- 19-UP RAM 1500 2/4WD 09-18 RAM 1500 4WD 2.5 VS IR COILOVER KIT
- Product Attributes:
- AAP_UDA_22: 1
- Grade Type: Performance
- AAP_UDA_4: 55
- Damping Type: Oil
- Adjustable Damping: No
- Service Parts:
- 252001 - 2.5 Fixed Spanner Wrench
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252003 - Seal Install Tool 2.5/3.0
- 252004 - Economy Needle Charging Tool
- 252011 - 2.5 Piggyback/remote Resi/bypass Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 257301 - 7/8 Shaft 10.25 Oal, 6.00 Travel
- 611019 - Coilover Hardware Kit Pair
- Shaft Diameter: 0.875
- AAP_UDA_12: Ea
- Dust Shield: No
- Recommended Aftermarket Tires: 33" X 11.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Upper Mount Type: Mounting Plate
- Coil Over Springs Included: Yes
- Recommended Aftermarket Wheels:
- (2009-up Models) Icon Alloys - 17x8.5" W/ 4.75" Backspace / 0mm Offset
- (2009-up Models) Icon Alloys - 18x9" W/ 5" Backspace / 0mm Offset
- (2009-up Models) Icon Alloys - 20x9" W/ 5" Backspace / 0mm Offset
- (2009-up Models) Icon Alloys | 17x8.5" W/ 4.75" Backspace / 0mm Offset
- (2009-up Models) Icon Alloys | 18x9" W/ 5" Backspace / 0mm Offset
- (2009-up Models) Icon Alloys | 20x9" W/ 5" Backspace / 0mm Offset
- (2019-up Models) Icon Alloys - 18x9" W/ 5" Backspace / 0mm Offset
- (2019-up Models) Icon Alloys - 20x9" W/ 5" Backspace / 0mm Offset
- (2019-up Models) Icon Alloys | 18x9" W/ 5" Backspace / 0mm Offset
- (2019-up Models) Icon Alloys | 20x9" W/ 5" Backspace / 0mm Offset
- Body Diameter: 2.5
- Gas Charged: Yes
- California Prop 65 Warning: Yes
- Boot Included: No
- Lower Mount Type: Clevis
- Shock Absorber Rod End Measuring Point: Center Of Clevis Holes
- Adjustable Height: Yes
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Spring Material: Steel
- Remote Reservoir: No
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Adjustable coilovers yield .75-2.5” of front lift height on '09-'18 models or 0-1.5" of lift on '19-Up models
- Increased wheel travel and vehicle specific valving provides unrivaled ride quality across a wide range of on and off-road use
- Superior low speed control reduces body roll and increases on-road stability
- High quality ICON-engineered coil springs are guaranteed for life against sagging or breakage
- Corrosion resistant CAD plated shock body with 7/8" shaft
- Fully serviceable design allows for revalves, rebuilds, and an immeasurable service life
- Bolt-in design makes for an easy install into OEM shock location
- ICON's Vehicle Specific (V.S.) 2.5 Series coilover shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune. Like all ICON shock absorbers, V.S. 2.5 Series shocks are 100% rebuildable and 100% revalveable.
Additional Fitment Information:
| Vehicle | Position | Front Spring | Sub Model | Drive Type |
|---|---|---|---|---|
| 2019 - Ram 1500 Classic | Front | Coil | Warlock | 4WD |
Showing 1 - 10 of 26 products
Loading...