Image
Product
Price
- NGK V-Power Spark Plug
- Gap 0.044"
- V-Power Spark Plug
- Product Attributes:
- Center Electrode Design: Standard
- Center Electrode Insulator Tip Projection:
- 0.12
- 3.0
- Washer Included: Yes
- Electrical Terminal Type: Non-removable Nut
- Grade Type: Standard Replacement
- Service Number: Bkr6e-11
- Washer Type: Crush
- Ground Electrode Tip Material: Nickel
- Short Style Spark Plug: No
- Skirt: No
- Center Electrode Core Material: Copper
- Part Number: Bkr6e-11
- Resistor Type: Yes
- Stock Number: 2756
- Ground Electrode Tip Design: Standard
- Pre-Gap Size:
- .044
- 1.1
- Ground Electrode Core Material: Nickel
- Material Grade: Nickel/copper
- Center Electrode Projection: Mid Projection
- Seat Type: Flat
- Ground Electrode Quantity: 1
- Insulator Material: Ceramic
- Hex Size: 5/8" (16mm)
- Reach:
- 0.750
- 19.0
- Center Electrode Tip Material: Nickel
- Skirt Length: 0.0
- Manufacturer Heat Range: 6
- Ground Configuration: J-gap
- Resistance: 5000.0
- Insulator Height:
- 1.99
- 50.5
- Thread Diameter:
- 0.551
- 14.0
-
Features:
- TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
- COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
- RECOMMENDED USAGE: Best for vehicles with OE nickel alloy plugs, not recommended on vehicles with factory precious metal plugs
- ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction nickel alloy center electrode with V-groove provides consistent performance
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- NGK's OE CERAMIC TECHNOLOGY: High grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance
- NGK V-Power spark plugs offer reliable performance and improved ignitability over standard nickel plugs. Engineered specifically for OE applications, the special V-cut nickel alloy center electrode and concave ground electrode of NGK's V-Power spark plug increases ignitability providing quicker starts and smoother idle. NGK's legendary high grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance. Trivalent metal plating ensures superior anti-corrosion and anti-seizing properties.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
0000-18-BP03, 09482-00494, 1765195, 1A53-18-110, 1P0A-18-110, 1Y0A, 22401-50Y06, 22401AA310, 2756, 3121, 3182, 3374, 345, 346, 346C2, 3923, 4001, 418...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1994 - Nissan Sentra | L | 1998 | 4 Cyl 2.0L | 122 |
- NGK V-Power Spark Plug
- Gap 0.044"
- V-Power Spark Plug
- Product Attributes:
- Center Electrode Design: Standard
- Center Electrode Insulator Tip Projection:
- 0.12
- 3.0
- Washer Included: Yes
- Electrical Terminal Type: Non-removable Nut
- Grade Type: Standard Replacement
- Service Number: Bkr6e-11
- Washer Type: Crush
- Ground Electrode Tip Material: Nickel
- Short Style Spark Plug: No
- Skirt: No
- Center Electrode Core Material: Copper
- Part Number: Bkr6e-11
- Resistor Type: Yes
- Stock Number: 2756
- Ground Electrode Tip Design: Standard
- Pre-Gap Size:
- .044
- 1.1
- Ground Electrode Core Material: Nickel
- Material Grade: Nickel/copper
- Center Electrode Projection: Mid Projection
- Seat Type: Flat
- Ground Electrode Quantity: 1
- Insulator Material: Ceramic
- Hex Size: 5/8" (16mm)
- Reach:
- 0.750
- 19.0
- Center Electrode Tip Material: Nickel
- Skirt Length: 0.0
- Manufacturer Heat Range: 6
- Ground Configuration: J-gap
- Resistance: 5000.0
- Insulator Height:
- 1.99
- 50.5
- Thread Diameter:
- 0.551
- 14.0
-
Features:
- TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
- COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
- RECOMMENDED USAGE: Best for vehicles with OE nickel alloy plugs, not recommended on vehicles with factory precious metal plugs
- ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction nickel alloy center electrode with V-groove provides consistent performance
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- NGK's OE CERAMIC TECHNOLOGY: High grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance
- NGK V-Power spark plugs offer reliable performance and improved ignitability over standard nickel plugs. Engineered specifically for OE applications, the special V-cut nickel alloy center electrode and concave ground electrode of NGK's V-Power spark plug increases ignitability providing quicker starts and smoother idle. NGK's legendary high grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance. Trivalent metal plating ensures superior anti-corrosion and anti-seizing properties.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
- This item must be purchased in quantities of 4
Additional Fitment Information:
| Vehicle | Block | CC | Engine Designation | Engine | CID |
|---|---|---|---|---|---|
| 1994 - Nissan Maxima | V | 2960 | VG30E | 6 Cyl 3.0L | 181 |
- Replaces H5600 Replaces 505600
- Raybestos R-Line
This Part Fits the Following OEM/Substitute Numbers:
084-1387, 117.64001, 28537, 30044117, 30044117A, 34111157038, 4105600, 4105608, 4105808, 4106845, 4115600, 522048, 5261, 5568, 5581, 5582, 7955600, DH1240...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1994 - Nissan Quest | Front |
- WIX Automatic Transmission Filter Kit
- Product Attributes:
- Inner Diameter Top: Closed
- Duty Type: Ld
- Class: W
- Automatic transmission filters feature design and construction that ensure no unfiltered fluid can bypass the application specific filtration media. Lock seamed and sealed assemblies and application specific sealing components ensure complete filtration. WIX transmission filter kits include sealing gaskets specifially designed for use with today's sophisticated transmission fluids
This Part Fits the Following OEM/Substitute Numbers:
0440248, 18011, 25313830, 3172880X03, 3172880X04, 5003201092, 58602, 5937, 61658602, 745146, 745151, 7937, 88602, 96006, AT85, ATI1215, B151, F163...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 1994 - Nissan Maxima | V | 2960 | United States | 6 Cyl 3.0L | 181 |
- 13 Row Plate & Fin Engine Oil Cooler Kit with Sandwich Adapter
- 13 Row Plate & Fin Engine Oil Cooler Kit with Sandwich Adapter
- Sandwich Adapter Engine Oil Cooler Kit
- Product Attributes:
- Adapter thread size: 3/4"-16, 13/16"-16, 18x1.5mm, 20x1.5mm, 22x1.5mm
- BTU: 21000
- Adapter o-ring size: 2-3/4, 3-1/2
- Cooler height: 8-7/16
- Cooler inlet dim: 8-1/2
- Adapter inlet size: 3/8 Npt
- Rated functional: 250psi Working / 300psi Burst Strength
- Cooler material: Aluminum
- Adapter thickness: 1-3/4, 2-1/8
-
Features:
- 13 Row Plate & Fin Engine Oil Cooler Kit with Sandwich Adapter
- A step up from the popular tube and fin design this aluminum plate and fin-based oil cooler kit not only reduces oil temperatures to help extend the life of lower end components and oil life, it also helps reduce coolant temperatures in the radiator and cooling system. This universal kit includes engine sandwich adapter, hose and everything you need to install on most passenger vehicles on the road today.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1994 - Nissan Altima | L | 2389 | 4 Cyl 2.4L | - |
- Universal Joint Greaseable 1310 Series OSR
- Greaseable USA Built 1.062in Bearing Cap Diameter with 3.219in Outside Snap Ring Dimension with VIN starts 1N6
- FSGR
- Product Attributes:
- Bearing Cap Type B: Osr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1310/spl22
- Bearing Cap Finish: Ground
- Mounting Hardware Included: N
- Bearing Cap Type A: Osr
- Greaseable: Y
- Bearing Cap Diameter (1): 1.062
- Grease Fitting Location: One Straight Lube Fitting In Cross
- SR(1)Brng Cap to Brng Cap(OSR): 3.219
- Type: Osr Style
- Material: Steel
- Bearing Cap Diameter A (mm):
- 1.062
- 26.975
- Bearing Cap Type: Round
- Length B (mm): 81.8
- SR(2)Brng Cap to Brng Cap(OSR): 3.219
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Bearing Cap Diameter (2): 1.062
- OEM Mfg: Spicer
- OEM Series: 1310
- Bearing Cap Diameter B (mm):
- 1.062
- 26.975
- Seal Color/Finish: Black
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 81.8
-
Features:
- OE engineering and field tested experience is why the Spicer brand is the most trusted in the industry.
- Forged with high-quality steel, these u-joints are heat treated and case-hardened with precision to specific levels, ensuring optimal strength and durability.
- The process of precision grinding the seal and bearing surfaces helps to improve the life of the seal and bearing.
- Zerk allows for lubricating at regular intervals to help extend the life of the part.
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 1994 - Nissan D21 | V | 2960 | Rear Driveshaft at Transmission | 6 Cyl 3.0L | 4WD | 181 |
- Universal Joint Greaseable 1310 Series OSR
- 1.062in Bearing Cap Diameter Greaseable with VIN starts 1N6 1 Piece Driveshaft USA Built with 3.219in Outside Snap Ring Dimension
- FSGR
- Product Attributes:
- Bearing Cap Type B: Osr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1310/spl22
- Bearing Cap Finish: Ground
- Mounting Hardware Included: N
- Bearing Cap Type A: Osr
- Greaseable: Y
- Bearing Cap Diameter (1): 1.062
- Grease Fitting Location: One Straight Lube Fitting In Cross
- SR(1)Brng Cap to Brng Cap(OSR): 3.219
- Type: Osr Style
- Material: Steel
- Bearing Cap Diameter A (mm):
- 1.062
- 26.975
- Bearing Cap Type: Round
- Length B (mm): 81.8
- SR(2)Brng Cap to Brng Cap(OSR): 3.219
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Bearing Cap Diameter (2): 1.062
- OEM Mfg: Spicer
- OEM Series: 1310
- Bearing Cap Diameter B (mm):
- 1.062
- 26.975
- Seal Color/Finish: Black
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 81.8
-
Features:
- OE engineering and field tested experience is why the Spicer brand is the most trusted in the industry.
- Forged with high-quality steel, these u-joints are heat treated and case-hardened with precision to specific levels, ensuring optimal strength and durability.
- The process of precision grinding the seal and bearing surfaces helps to improve the life of the seal and bearing.
- Zerk allows for lubricating at regular intervals to help extend the life of the part.
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 1994 - Nissan D21 | V | 2960 | Rear Driveshaft at Transmission | 6 Cyl 3.0L | RWD | 181 |
- Universal Joint Greaseable 1310 Series OSR
- Greaseable USA Built with VIN starts 1N6 1.062in Bearing Cap Diameter with 2 Piece Drive Shaft with 3.219in Outside Snap Ring Dimension
- FSGR
- Product Attributes:
- Bearing Cap Type B: Osr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1310/spl22
- Bearing Cap Finish: Ground
- Mounting Hardware Included: N
- Bearing Cap Type A: Osr
- Greaseable: Y
- Bearing Cap Diameter (1): 1.062
- Grease Fitting Location: One Straight Lube Fitting In Cross
- SR(1)Brng Cap to Brng Cap(OSR): 3.219
- Type: Osr Style
- Material: Steel
- Bearing Cap Diameter A (mm):
- 1.062
- 26.975
- Bearing Cap Type: Round
- Length B (mm): 81.8
- SR(2)Brng Cap to Brng Cap(OSR): 3.219
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Bearing Cap Diameter (2): 1.062
- OEM Mfg: Spicer
- OEM Series: 1310
- Bearing Cap Diameter B (mm):
- 1.062
- 26.975
- Seal Color/Finish: Black
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 81.8
-
Features:
- OE engineering and field tested experience is why the Spicer brand is the most trusted in the industry.
- Forged with high-quality steel, these u-joints are heat treated and case-hardened with precision to specific levels, ensuring optimal strength and durability.
- The process of precision grinding the seal and bearing surfaces helps to improve the life of the seal and bearing.
- Zerk allows for lubricating at regular intervals to help extend the life of the part.
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 1994 - Nissan D21 | V | 2960 | Rear Driveshaft at Transmission | 6 Cyl 3.0L | RWD | 181 |
- Universal Joint Greaseable 1310 Series OSR
- Greaseable USA Built with VIN starts 1N6 1.062in Bearing Cap Diameter with 2 Piece Drive Shaft with 3.219in Outside Snap Ring Dimension
- FSGR
- Product Attributes:
- Bearing Cap Type B: Osr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1310/spl22
- Bearing Cap Finish: Ground
- Mounting Hardware Included: N
- Bearing Cap Type A: Osr
- Greaseable: Y
- Bearing Cap Diameter (1): 1.062
- Grease Fitting Location: One Straight Lube Fitting In Cross
- SR(1)Brng Cap to Brng Cap(OSR): 3.219
- Type: Osr Style
- Material: Steel
- Bearing Cap Diameter A (mm):
- 1.062
- 26.975
- Bearing Cap Type: Round
- Length B (mm): 81.8
- SR(2)Brng Cap to Brng Cap(OSR): 3.219
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Bearing Cap Diameter (2): 1.062
- OEM Mfg: Spicer
- OEM Series: 1310
- Bearing Cap Diameter B (mm):
- 1.062
- 26.975
- Seal Color/Finish: Black
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 81.8
-
Features:
- OE engineering and field tested experience is why the Spicer brand is the most trusted in the industry.
- Forged with high-quality steel, these u-joints are heat treated and case-hardened with precision to specific levels, ensuring optimal strength and durability.
- The process of precision grinding the seal and bearing surfaces helps to improve the life of the seal and bearing.
- Zerk allows for lubricating at regular intervals to help extend the life of the part.
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 1994 - Nissan D21 | V | 2960 | Rear Driveshaft at Support Bearing | 6 Cyl 3.0L | RWD | 181 |
- Universal Joint Greaseable 1310 Series OSR
- Greaseable USA Built 1.062in Bearing Cap Diameter with 3.219in Outside Snap Ring Dimension with VIN starts 1N6
- FSGR
- Product Attributes:
- Bearing Cap Type B: Osr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1310/spl22
- Bearing Cap Finish: Ground
- Mounting Hardware Included: N
- Bearing Cap Type A: Osr
- Greaseable: Y
- Bearing Cap Diameter (1): 1.062
- Grease Fitting Location: One Straight Lube Fitting In Cross
- SR(1)Brng Cap to Brng Cap(OSR): 3.219
- Type: Osr Style
- Material: Steel
- Bearing Cap Diameter A (mm):
- 1.062
- 26.975
- Bearing Cap Type: Round
- Length B (mm): 81.8
- SR(2)Brng Cap to Brng Cap(OSR): 3.219
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Bearing Cap Diameter (2): 1.062
- OEM Mfg: Spicer
- OEM Series: 1310
- Bearing Cap Diameter B (mm):
- 1.062
- 26.975
- Seal Color/Finish: Black
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 81.8
-
Features:
- OE engineering and field tested experience is why the Spicer brand is the most trusted in the industry.
- Forged with high-quality steel, these u-joints are heat treated and case-hardened with precision to specific levels, ensuring optimal strength and durability.
- The process of precision grinding the seal and bearing surfaces helps to improve the life of the seal and bearing.
- Zerk allows for lubricating at regular intervals to help extend the life of the part.
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
02362830, 031468, 04371-04010, 04371-04020, 04371-0C010, 0437104010, 0437104020, 043710C010, 04723072, 051025Z1546, 051025Z3207, 055-0737, 06-06-1242, 1-0153, 1-0153G, 1-0154, 1-0200, 1-0278...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 1994 - Nissan D21 | V | 2960 | Front Driveshaft at Transfer Case | 6 Cyl 3.0L | 4WD | 181 |
Showing 1 - 10 of 35 products
Loading...