Shop By Product Matching "ATE"
Choose a Model for your 2013 Jeep
Image
Product
Price
- 170 Degrees F 203 Degrees F May Require Hose from the Housing to the Heater Core Replacement OE Specified Temperature ; Includes upper & lower housing, thermostats, and seal
- Thermostat Assembly
This Part Fits the Following OEM/Substitute Numbers:
68003582AB, 86087, 902-319, 9134AT, 9TA4319, CO34760, NI, TA4319, TA4319DL
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Jeep Patriot | L | 1998 | 4 Cyl 2.0L | 122 |
- with 3.625in Outside Snap Ring Dimension with Aftermarket 1350 Drive Shaft 1.188in Bearing Cap Diameter Non-Greasable with Uncoated
- HGVF
- Product Attributes:
- Bearing Cap Type B: Osr
- Length B (mm): 92.1
- SR(2)Brng Cap to Brng Cap(OSR): 3.625
- Bearing Cap Type A: Osr
- Greaseable: N
- Bearing Cap Diameter (2): 1.188
- Bearing Cap Diameter (1): 1.188
- OEM Mfg: Spicer
- OEM Series: 1350/spl30
- Bearing Cap Diameter B (mm): 1.188
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 92.1
- SR(1)Brng Cap to Brng Cap(OSR): 3.625
- Bearing Cap Diameter A (mm): 1.188
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2013 - Jeep Wrangler | Front Driveshaft at Front Axle |
- with 3.625in Outside Snap Ring Dimension with Aftermarket 1350 Drive Shaft 1.188in Bearing Cap Diameter Non-Greasable with Uncoated
- HGVF
- Product Attributes:
- Bearing Cap Type B: Osr
- Length B (mm): 92.1
- SR(2)Brng Cap to Brng Cap(OSR): 3.625
- Bearing Cap Type A: Osr
- Greaseable: N
- Bearing Cap Diameter (2): 1.188
- Bearing Cap Diameter (1): 1.188
- OEM Mfg: Spicer
- OEM Series: 1350/spl30
- Bearing Cap Diameter B (mm): 1.188
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 92.1
- SR(1)Brng Cap to Brng Cap(OSR): 3.625
- Bearing Cap Diameter A (mm): 1.188
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2013 - Jeep Wrangler | Front Driveshaft - CV at Transfer Case |
- with 3.625in Outside Snap Ring Dimension with Aftermarket 1350 Drive Shaft 1.188in Bearing Cap Diameter Non-Greasable with Uncoated
- HGVF
- Product Attributes:
- Bearing Cap Type B: Osr
- Length B (mm): 92.1
- SR(2)Brng Cap to Brng Cap(OSR): 3.625
- Bearing Cap Type A: Osr
- Greaseable: N
- Bearing Cap Diameter (2): 1.188
- Bearing Cap Diameter (1): 1.188
- OEM Mfg: Spicer
- OEM Series: 1350/spl30
- Bearing Cap Diameter B (mm): 1.188
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 92.1
- SR(1)Brng Cap to Brng Cap(OSR): 3.625
- Bearing Cap Diameter A (mm): 1.188
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2013 - Jeep Wrangler | Rear Driveshaft at Transmission |
- with 3.625in Outside Snap Ring Dimension with Aftermarket 1350 Drive Shaft 1.188in Bearing Cap Diameter Non-Greasable with Uncoated
- HGVF
- Product Attributes:
- Bearing Cap Type B: Osr
- Length B (mm): 92.1
- SR(2)Brng Cap to Brng Cap(OSR): 3.625
- Bearing Cap Type A: Osr
- Greaseable: N
- Bearing Cap Diameter (2): 1.188
- Bearing Cap Diameter (1): 1.188
- OEM Mfg: Spicer
- OEM Series: 1350/spl30
- Bearing Cap Diameter B (mm): 1.188
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 92.1
- SR(1)Brng Cap to Brng Cap(OSR): 3.625
- Bearing Cap Diameter A (mm): 1.188
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2013 - Jeep Wrangler | Rear Driveshaft at Rear Axle |
- Universal Joint
- with Uncoated 1.188in Bearing Cap Diameter Non-Greasable with 3.625in Outside Snap Ring Dimension with Aftermarket 1350 Drive Shaft
- HGVF
- Product Attributes:
- Bearing Cap Type B: Osr
- Snap Ring (1): 3.625
- Snap Ring (2): 3.625
- Length B (mm): 92.1
- SR(2)Brng Cap to Brng Cap(OSR): 3.625
- Bearing Cap Type A: Osr
- Greaseable: N
- Bearing Cap Diameter (2): 1.188
- Bearing Cap Diameter (1): 1.188
- OEM Mfg: Spicer
- OEM Series: 1350/spl30
- Bearing Cap Diameter B (mm): 1.188
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 92.1
- SR(1)Brng Cap to Brng Cap(OSR): 3.625
- Bearing Cap Diameter A (mm): 1.188
- You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you are getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2013 - Jeep Wrangler | Front Driveshaft at Front Axle |
- Universal Joint
- with Uncoated 1.188in Bearing Cap Diameter Non-Greasable with 3.625in Outside Snap Ring Dimension with Aftermarket 1350 Drive Shaft
- HGVF
- Product Attributes:
- Bearing Cap Type B: Osr
- Snap Ring (1): 3.625
- Snap Ring (2): 3.625
- Length B (mm): 92.1
- SR(2)Brng Cap to Brng Cap(OSR): 3.625
- Bearing Cap Type A: Osr
- Greaseable: N
- Bearing Cap Diameter (2): 1.188
- Bearing Cap Diameter (1): 1.188
- OEM Mfg: Spicer
- OEM Series: 1350/spl30
- Bearing Cap Diameter B (mm): 1.188
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 92.1
- SR(1)Brng Cap to Brng Cap(OSR): 3.625
- Bearing Cap Diameter A (mm): 1.188
- You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you are getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
15-178X, 2-0052, 2-0053, 2-0053G, 2-0053P, 2-0799, 231, 232, 331, 331BL, 45U0103, 45U0109, 45U0123, 5-178X, UJ231, UJ232, UJ331, UJ331BL...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2013 - Jeep Wrangler | Front Driveshaft - CV at Transfer Case |
- Universal Joint
- with Uncoated 1.188in Bearing Cap Diameter Non-Greasable with 3.625in Outside Snap Ring Dimension with Aftermarket 1350 Drive Shaft
- HGVF
- Product Attributes:
- Bearing Cap Type B: Osr
- Snap Ring (1): 3.625
- Snap Ring (2): 3.625
- Length B (mm): 92.1
- SR(2)Brng Cap to Brng Cap(OSR): 3.625
- Bearing Cap Type A: Osr
- Greaseable: N
- Bearing Cap Diameter (2): 1.188
- Bearing Cap Diameter (1): 1.188
- OEM Mfg: Spicer
- OEM Series: 1350/spl30
- Bearing Cap Diameter B (mm): 1.188
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 92.1
- SR(1)Brng Cap to Brng Cap(OSR): 3.625
- Bearing Cap Diameter A (mm): 1.188
- You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you are getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2013 - Jeep Wrangler | Rear Driveshaft at Transmission |
- Black Steel Grille Guard; Select Jeep Wrangler JK
- 1 pc.; Semi-Gloss Black Powder Coat; Carbon Steel; w/o Headlight Cage; Includes Hardware
- ARIES 1050 1-1/2-Inch Black Steel Grille Guard; No-Drill; Select Jeep Wrangler JK
- Grille Guard
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
-
Features:
- One-Piece/ 1-1/2 in. Diameter/ Heavy-Wall Tube Design
- High-Strength Carbon Steel Construction
- Dual-Layer E-Coat And Black Powder Coat Finish
- Two Pre-Drilled Holes In The Crossbar For Mounting LED Light Bars
- Vertical Rubber Stripping To Help Maintain Clean Finish
- No-Drill/ Vehicle-Specific Application For Custom Fit
- Includes Grille Guard And Mounting Hardware
- Grille Guard May Interfere w/Forward-Facing Cameras Or Sensors
- For the conqueror in every truck, Jeep or SUV owner, the ARIES grille guard offers the tough, trail-ready look you demand. It begins with a one-piece frame of 1/4 in. thick welded plates and 1-1/2 in. mandrel-bent tubing for a solid build. Each one is made with a vehicle-specific design for a better fit, easier install and more secure mounting. The side brush guards are custom-bent to contour to the profile of your vehicle, while the mounting brackets are positioned for a no-drill application. This means pre-existing factory holes are used to ensure optimum fitment and less vibration. This particular custom grille guard fits specific years of the Jeep Wrangler (see application info to verify). The ARIES grille guard also makes it easy to customize the look of your vehicle. Not only does the crossbar have two pre-drilled holes for mounting aftermarket LED lights, but many of our grille guards are also available in two finish options -- polished stainless steel or semi-gloss black steel. The stainless steel grille guard is made with 304 stainless, being high in nickel content and truly resistant to rust and corrosion. This option comes with a mirror-like polished finish for a definitive shine. The semi-gloss black grille guard is made with high-strength carbon steel for added strength. It features a tough, dual-layer E-coat and black powder coat finish to protect against rust, scratches and the elements. All ARIES grille guards also come with rubber stripping along the risers to protect the frame against scuffs and scratches.
Additional Fitment Information:
| Vehicle |
|---|
| 2013 - Jeep Wrangler |
- Dual-Output 7/4-Way Connector with Backup Alarm (Plugs into USCAR)
- w/Back Up Alarm; GM/Ford Plug For Models w/Factory Tow Package
- CURT 57101 Dual-Output Vehicle-Side 7-Pin; 4-Pin Connectors with Backup Alarm; Factory Tow Package and USCAR Socket Required
- 7-Way Round RV To 4-Way Flat Adapter
-
Features:
- Plugs Into Round Uscar Socket On Ford Or Gm
- Replaces The Factory-Equipped 7-Way Socket
- Integrated Backup Alarm Sounds When Vehicle Is In Reverse
- Simple Plug-And-Play Design Eliminates The Need For Splicing
- 4-Way Flat Connects Tail Lights Brake Lights And Turn Signals
- 7-Way Rave Blade Adds Reverse Lights Electric Brakes
- Dust Covers Included To Keep Connectors Clean When Not In Use
- Bracket Securely Mounts Wiring To The Vehicle Or Trailer Hitch
- A CURT custom original equipment vehicle-to-trailer connector (sometimes called a T-connector) is a simple, plug-and-play electrical device that eliminates the need for cutting, splicing and soldering when installing vehicle-to-trailer wiring. Most vehicles do not come ready to tow. Unless your vehicle has a towing package, it is probably not equipped with a trailer wiring connector. This is where CURTs OE vehicle-to-trailer connectors come into play. A custom wiring connector uses a single original equipment plug to plug into a special socket provided by your vehicle. Though this option is not available on every vehicle, some automotive manufacturers design their vehicles to be easily equipped for towing by supplying a socket, integrated into the vehicles electrical system, to readily accept a custom wiring connector. With a CURT custom OE connector, there is no need to tap into the taillight assembly because a special socket is already provided. This special custom vehicle-to-trailer wiring connector provides a multi-function connector socket. It is designed to plug into a circular 7-prong OEM socket and replace a factory-equipped 7-way connector with a 7-way RV blade and 4-way flat. It specifically offers a custom wiring option for a variety of vehicles (see application info to verify fitment with your vehicle).This multipurpose socket comes with its own backup alarm, a mounting bracket and all necessary mounting hardware for a complete installation. CURT custom vehicle-to-trailer wiring connectors are designed to be long-lasting and simple to install. They come with dust covers to keep your connector clean when not in use.
Additional Fitment Information:
| Vehicle |
|---|
| 2013 - Jeep Wrangler |
Showing 1 - 10 of 32 products
Loading...