Shop By Product Matching "Advanced Clutch"
Image
Product
Price
- ACT Heavy Duty Clutch Pressure Plate
- Heavy Duty Pressure Plate
- Heavy Duty Pressure Plate
- Product Attributes:
- Counterweight Assist: No
- Grade Type: Performance
- SFI: 1.1
- Product Weight (lbs.):
- 12.3
- 12.7
- Part Fitment Requirement: Includes Act Monoloc.
- Prop 65 Long Label: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
-
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
- MB018 is an ACT pressure plate that uses exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's Heavy Duty pressure plates increase clamp load by 20 to 50 percent. ACT's Heavy Duty pressure plates are recommended for use with a street or race disc. Monoloc is a one-piece, direct replacement or upgrade to the standard, two-piece wedge collar and wire ring featured in pull-type clutches. The spring tension of the segmented retaining ring is carefully calculated and tested for optimal performance. It provides uniform loading on the bearing and pressure plate to assure proper alignment, regardless of driver influence or vehicle modifications. Monoloc's hardened chrome-moly steel construction will provide years of service.
Additional Fitment Information:
| Vehicle | Block | CC | Cylinder Head Type | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2006 - Mitsubishi Lancer | L | 1997 | DOHC | 4 Cyl 2.0L | Evolution | 122 |
- ACT Heavy Duty Clutch Pressure Plate
- Heavy Duty Pressure Plate
- Heavy Duty Pressure Plate
- Product Attributes:
- Counterweight Assist: No
- Grade Type: Performance
- SFI: 1.1
- Product Weight (lbs.):
- 12.3
- 12.7
- Part Fitment Requirement:
- Includes Act Monoloc.
- Includes Monoloc.
- Prop 65 Long Label: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
-
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
- MB018 is an ACT pressure plate that uses exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's Heavy Duty pressure plates increase clamp load by 20 to 50 percent. ACT's Heavy Duty pressure plates are recommended for use with a street or race disc. Monoloc is a one-piece, direct replacement or upgrade to the standard, two-piece wedge collar and wire ring featured in pull-type clutches. The spring tension of the segmented retaining ring is carefully calculated and tested for optimal performance. It provides uniform loading on the bearing and pressure plate to assure proper alignment, regardless of driver influence or vehicle modifications. Monoloc's hardened chrome-moly steel construction will provide years of service.
Additional Fitment Information:
| Vehicle | Block | CC | Cylinder Head Type | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2006 - Mitsubishi Lancer | L | 1997 | DOHC | 4 Cyl 2.0L | Evolution SE | 122 |
- ACT XACT Streetlite Clutch Flywheel
- XACT Flywheel Streetlite
- XACT Flywheel Streetlite
- Product Attributes:
- Friction Surface Diameter:
- 240
- 9.4
- Engine Balance: Internal
- Grade Type: Performance
- Mounting Hardware Included: No
- Mounting Hole Quantity: 7
- SFI Rating: 1.1
- Prop 65 Long Label: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
- Friction Surface Configuration: Flat
- Tooth Quantity: 114
- SFI: 1.1
- Replaceable Friction Surface: No
- Product Weight (lbs.):
- 13.0
- 13.1
- Weight: 13.1
- Friction Surface Diameter:
-
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
- 600205 is a Streetlite flywheel, which is considerably lighter than stock and is the most durable flywheel offering from ACT. Materials are properly distributed for maximum strength, lower inertia, good heat tolerance and rigidity. ACT's Streetlite flywheels are preferred for street or drag racing. ACT flywheels are serviceable and can be resurfaced with no need to purchase additional parts.
This Part Fits the Following OEM/Substitute Numbers:
2-645-STU, 700920, FW-645-SF, MF04, SM08A
Additional Fitment Information:
| Vehicle | Block | CC | Cylinder Head Type | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2006 - Mitsubishi Lancer | L | 1997 | DOHC | 4 Cyl 2.0L | Evolution SE | 122 |
- ACT XACT Streetlite Clutch Flywheel
- XACT Flywheel Streetlite
- XACT Flywheel Streetlite
- Product Attributes:
- Friction Surface Diameter:
- 240
- 9.4
- Engine Balance: Internal
- Grade Type: Performance
- Mounting Hardware Included: No
- Mounting Hole Quantity: 7
- SFI Rating: 1.1
- Prop 65 Long Label: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
- Friction Surface Configuration: Flat
- Tooth Quantity: 114
- SFI: 1.1
- Replaceable Friction Surface: No
- Product Weight (lbs.):
- 13.0
- 13.1
- Weight: 13.1
- Friction Surface Diameter:
-
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
- 600205 is a Streetlite flywheel, which is considerably lighter than stock and is the most durable flywheel offering from ACT. Materials are properly distributed for maximum strength, lower inertia, good heat tolerance and rigidity. ACT's Streetlite flywheels are preferred for street or drag racing. ACT flywheels are serviceable and can be resurfaced with no need to purchase additional parts.
Additional Fitment Information:
| Vehicle | Block | CC | Cylinder Head Type | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2006 - Mitsubishi Lancer | L | 1997 | DOHC | 4 Cyl 2.0L | Evolution | 122 |
- ACT Mod-Twin 225 Heavy Duty Sprung Street Clutch Kit
- Mod-Twin 225 HD Sprung Street
- Mod-Twin 225 HD Sprung Street
- Product Attributes:
- Torque Capacity Over OE: 97%
- Torque Capacity (ft/lbs.): 700
- Grade Type: Performance
- Pilot Bearing Included: No
- Alignment Tool Included: Yes
- Disc Material: Organic
- Pilot Bushing Included: No
- Input Shaft Diameter: 1
- Disc Type Sprung Solid: Sprung
- Flywheel Bolts Included: No
- Prop 65 Long Label: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
- Input Spline Quantity: 23
- Pressure Plate Bolts Included: No
- Grease Included: Yes
- Clutch Slave Cylinder Included: No
- Pressure Plate Type: Heavy Duty
- SFI: 1.2
- Release Bearing Included: Yes
- Clutch Master Cylinder Included: No
- Product Weight (lbs.): 28.1
- Clutch Disc Diameter:
- 225
- 8.8
- Flywheel Included: Yes
-
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
- T1S-M01 Mod-Twin 225 HD Sprung Street Kit is designed for high powered AWD street cars. It unites uncompromised pedal feel, durability, engagement quality with very high torque capacity by combining twice the organic friction surfaces with an ultra-durable spring center Mono-Drive hub in a completely modular design. Each diaphragm spring endures an exclusive four-stage heat treating process providing a consistent light pedal feel. Steel-backed Friction Plates with high quality organic friction materials deliver stable friction coefficient, good heat capacity and long clutch life. These Friction Plates uniformly transfer torque to the Mono-Drive sprung hub assembly which extends input shaft life and reduces driveline shock from torsional vibration. This kit includes a CNC-machined and dynamically balanced flywheel, pressure plate cover, diaphragm spring, face, puck-style ceramic friction plates, sprung Mono-Drive hub assembly, floater, patented Monoloc Collar, release bearing, alignment tool and pilot bearing (if needed). Mod-Twin clutches are fully rebuildable and most components can be ordered separately.
Additional Fitment Information:
| Vehicle | Block | CC | Cylinder Head Type | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2006 - Mitsubishi Lancer | L | 1997 | DOHC | 4 Cyl 2.0L | Evolution | 122 |
- ACT Mod-Twin 225 Heavy Duty Sprung Street Clutch Kit
- Mod-Twin 225 HD Sprung Street
- Mod-Twin 225 HD Sprung Street
- Product Attributes:
- Torque Capacity Over OE: 97%
- Torque Capacity (ft/lbs.): 700
- Grade Type: Performance
- Pilot Bearing Included: No
- Alignment Tool Included: Yes
- Disc Material: Organic
- Pilot Bushing Included: No
- Input Shaft Diameter: 1
- Disc Type Sprung Solid: Sprung
- Flywheel Bolts Included: No
- Prop 65 Long Label: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
- Input Spline Quantity: 23
- Pressure Plate Bolts Included: No
- Grease Included: Yes
- Clutch Slave Cylinder Included: No
- Pressure Plate Type: Heavy Duty
- SFI: 1.2
- Release Bearing Included: Yes
- Clutch Master Cylinder Included: No
- Product Weight (lbs.): 28.1
- Clutch Disc Diameter:
- 225
- 8.8
- Flywheel Included: Yes
-
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
- T1S-M01 Mod-Twin 225 HD Sprung Street Kit is designed for high powered AWD street cars. It unites uncompromised pedal feel, durability, engagement quality with very high torque capacity by combining twice the organic friction surfaces with an ultra-durable spring center Mono-Drive hub in a completely modular design. Each diaphragm spring endures an exclusive four-stage heat treating process providing a consistent light pedal feel. Steel-backed Friction Plates with high quality organic friction materials deliver stable friction coefficient, good heat capacity and long clutch life. These Friction Plates uniformly transfer torque to the Mono-Drive sprung hub assembly which extends input shaft life and reduces driveline shock from torsional vibration. This kit includes a CNC-machined and dynamically balanced flywheel, pressure plate cover, diaphragm spring, face, puck-style ceramic friction plates, sprung Mono-Drive hub assembly, floater, patented Monoloc Collar, release bearing, alignment tool and pilot bearing (if needed). Mod-Twin clutches are fully rebuildable and most components can be ordered separately.
Additional Fitment Information:
| Vehicle | Block | CC | Cylinder Head Type | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2006 - Mitsubishi Lancer | L | 1997 | DOHC | 4 Cyl 2.0L | Evolution SE | 122 |
Showing 1 - 6 of 6 products
Loading...