Shop By Product Matching "Anchor"
Choose a Model for your 2013 Toyota
Image
Product
Price
- For PN[DZ95050/DZ95054]
- Cab Rack Tie Down Kit; For PN[DZ95050/DZ95054];
- Cab Rack Tie Down Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: State Of California Consumers - Warning: Cancer And Reproductive Harm. Www.p65warnings.ca.gov
-
Features:
- Cab Rack Tie Down Kit
- Dee Zee Cab Rack Tie Downs - Cargo Management. Dee Zees Cab Rack Tie Downs fit the integrated accessory channel in Dee Zee cab racks. The heavy duty cast aluminum tie downs allow you to anchor cargo. Sold in pairs.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle |
|---|
| 2013 - Toyota Tundra |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2013 - Toyota Sequoia | Rear |
- Grained Plastic; Boxed Set of 2 Requires Pop-Out Rail Cap Covers; Standard Cab
- Raised Fit Retractable Tie Down Anchors - '00-13 Tundra with Standard, Extended Cab (Grained Plastic; Boxed Set of 2)
- Raised Fit Retractable Tie Down Anchors
- Product Attributes:
- Dimensions: 4 X 3 X 2 In.
- Packaging: Boxed Set Of 2
- Description: Grained Plastic; Boxed Set Of 2
- Prop 65 Warning Label: Prop 65 Warning: This Product Can Expose You To Chemicals, Which Are Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov.
- Product Type: Raised Fit Retractable Tie Down Anchors
- Prop 65 - Short Label: Cr
- Weight (lbs.): 1.0
-
Features:
- Raised Fit - Sits on top of the rail cap
- Stainless ring, stainless chassis, nylon lower body with sound dampening
- Fully retractable, snaps up - snaps down
- 1000 lbs. capacity
- Lifetime warranty
- Sold as a pair (2 anchors)
- IMPORTANT NOTE: Fits Regular Cab and Extended Cab Trucks. Fits Access Cab only if equipped with pop-out rail cap covers. Does NOT Fit Double Cab and Crew Max models.
- Bull Rings are the premium tie-down anchor point for your truck. While the stock anchors points are inside the bed where it’s hard to reach, Bull Rings retractable anchor points easily install into the stake pockets on top of your bed rails. Our classic Raised model sits just above the railcap. Works with truck models that have pop-out rail cap covers. Simply pop the stainless steel anchor ring up when you want to use it to secure a load, then hit it down flush when you don’t. Each is made from stainless steel for a 1000 lbs capacity, matches the grain and color of Toyota railcaps, and comes with our “no bull” Lifetime Warranty.
Additional Fitment Information:
| Vehicle | Body |
|---|---|
| 2013 - Toyota Tundra | Standard Cab Pickup |
- Grained Plastic; Boxed Set of 2 [Requires Pop-Out Rail Cap Covers]
- Raised Fit Retractable Tie Down Anchors - '00-13 Tundra with Standard, Extended Cab (Grained Plastic; Boxed Set of 2)
- Raised Fit Retractable Tie Down Anchors
- Product Attributes:
- Dimensions: 4 X 3 X 2 In.
- Packaging: Boxed Set Of 2
- Description: Grained Plastic; Boxed Set Of 2
- Prop 65 Warning Label: Prop 65 Warning: This Product Can Expose You To Chemicals, Which Are Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov.
- Product Type: Raised Fit Retractable Tie Down Anchors
- Prop 65 - Short Label: Cr
- Prop 65 (C, R or CR): Cr
- Weight (lbs.): 1.0
-
Features:
- Raised Fit - Sits on top of the rail cap
- Stainless ring, stainless chassis, nylon lower body with sound dampening
- Fully retractable, snaps up - snaps down
- 1000 lbs. capacity
- Lifetime warranty
- Sold as a pair (2 anchors)
- IMPORTANT NOTE: Fits Regular Cab and Extended Cab Trucks. Fits Access Cab only if equipped with pop-out rail cap covers. Does NOT Fit Double Cab and Crew Max models.
- Bull Rings are the premium tie-down anchor point for your truck. While the stock anchors points are inside the bed where it’s hard to reach, Bull Rings retractable anchor points easily install into the stake pockets on top of your bed rails. Our classic Raised model sits just above the railcap. Works with truck models that have pop-out rail cap covers. Simply pop the stainless steel anchor ring up when you want to use it to secure a load, then hit it down flush when you don’t. Each is made from stainless steel for a 1000 lbs capacity, matches the grain and color of Toyota railcaps, and comes with our “no bull” Lifetime Warranty.
Additional Fitment Information:
| Vehicle | Body |
|---|---|
| 2013 - Toyota Tundra | Extended Cab Pickup |
- Grained Plastic; Boxed Set of 2 Requires Pop-Out Rail Cap Covers; Extended Cab
- Raised Fit Retractable Tie Down Anchors - '00-13 Tundra with Standard, Extended Cab (Grained Plastic; Boxed Set of 2)
- Raised Fit Retractable Tie Down Anchors
- Product Attributes:
- Dimensions: 4 X 3 X 2 In.
- Packaging: Boxed Set Of 2
- Description: Grained Plastic; Boxed Set Of 2
- Prop 65 Warning Label: Prop 65 Warning: This Product Can Expose You To Chemicals, Which Are Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov.
- Product Type: Raised Fit Retractable Tie Down Anchors
- Prop 65 - Short Label: Cr
- Weight (lbs.): 1.0
-
Features:
- Raised Fit - Sits on top of the rail cap
- Stainless ring, stainless chassis, nylon lower body with sound dampening
- Fully retractable, snaps up - snaps down
- 1000 lbs. capacity
- Lifetime warranty
- Sold as a pair (2 anchors)
- IMPORTANT NOTE: Fits Regular Cab and Extended Cab Trucks. Fits Access Cab only if equipped with pop-out rail cap covers. Does NOT Fit Double Cab and Crew Max models.
- Bull Rings are the premium tie-down anchor point for your truck. While the stock anchors points are inside the bed where it’s hard to reach, Bull Rings retractable anchor points easily install into the stake pockets on top of your bed rails. Our classic Raised model sits just above the railcap. Works with truck models that have pop-out rail cap covers. Simply pop the stainless steel anchor ring up when you want to use it to secure a load, then hit it down flush when you don’t. Each is made from stainless steel for a 1000 lbs capacity, matches the grain and color of Toyota railcaps, and comes with our “no bull” Lifetime Warranty.
Additional Fitment Information:
| Vehicle | Body |
|---|---|
| 2013 - Toyota Tundra | Extended Cab Pickup |
- Raised Fit Retractable Tie Down Anchors
- Raised Fit Retractable Tie Down Anchors - '00-13 Tundra with Standard, Extended Cab (Grained Plastic; Boxed Set of 2)
- Raised Fit Tie Down Anchor
- Product Attributes:
- Capacity: 1000 Lbs.
- Packaging: Boxed Set Of 2
- Ring Material: Polished Stainless Steel
- Product Type: Raised Fit Retractable Tie Down Anchors
- Prop 65 - Short Label: Cr
- Body Material: Sound Deadening Nylon
- Weight (lbs.): 1.0
- Dimensions: 4 X 3 X 2 In.
- Description: Grained Plastic; Boxed Set Of 2
- Prop 65 Warning Label: Prop 65 Warning: This Product Can Expose You To Chemicals, Which Are Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov.
- Mount: Raised
- Prop 65 (C, R or CR): Cr
-
Features:
- Raised Fit - Sits on top of the rail cap
- Stainless ring, stainless chassis, nylon lower body with sound dampening
- Fully retractable, snaps up - snaps down
- 1000 lbs. capacity
- Lifetime warranty
- Sold as a pair (2 anchors)
- IMPORTANT NOTE: Fits Regular Cab and Extended Cab Trucks. Fits Access Cab only if equipped with pop-out rail cap covers. Does NOT Fit Double Cab and Crew Max models.
- Bull Rings are the premium tie-down anchor point for your truck. While the stock anchors points are inside the bed where it’s hard to reach, Bull Rings retractable anchor points easily install into the stake pockets on top of your bed rails. Our classic Raised model sits just above the railcap. Works with truck models that have pop-out rail cap covers. Simply pop the stainless steel anchor ring up when you want to use it to secure a load, then hit it down flush when you don’t. Each is made from stainless steel for a 1000 lbs capacity, matches the grain and color of Toyota railcaps, and comes with our “no bull” Lifetime Warranty.
Additional Fitment Information:
| Vehicle |
|---|
| 2013 - Toyota Tundra |
Showing 1 - 10 of 10 products
Loading...