Image
Product
Price
- W/40 1/4" Belt O.C.; W/1/2" Belt T.W.; W/V-Belt Drive
- High Capacity V-Belt (Standard)
- Product Attributes:
- Top Width: .47
- Belt Material: Epdm
- Notched: Yes
- Outside Circumference:
- 1031
- 40.62
- Construction: Notched
- Cross Section Designation: Hc50
- Effective Length:
- 1016
- 40
- Strand Quantity: 1
- Type: High Capacity V-belt (standard)
- Cord Material: Polyester
-
Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
- Gates Automotive XL V-Belt is a durable, long-lasting replacement V-belt designed for the most demanding engine drives. Due to thermal forces in the vehicle engine, this variable notched belt tightens on the drive as it heats up to prevent slippage, improve belt performance and reduce noise.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0049972092, 0059977192, 0070101, 008554, 0109700, 0110038, 0197811004, 0200066, 027016441, 027023887, 03-02-085-1, 031105091, 031106721, 0351452716, 035145271C, 035145271E, 035145271F, 0401403...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1957 - Jaguar Mark 1 | L | 3442 | Fan and Generator | GAS | 6 Cyl 3.4L | 210 |
- Taper Bearing Set Includes Cup and Cone
This Part Fits the Following OEM/Substitute Numbers:
0009811681KZ, 009311213, 010311213, 010409608, 0327382, 0327382-8, 06319792, 0635 501 008, 102842A, 10A7330, 1121086, 155401, 15A10664, 1615340, 1619687, 1619700, 1671469, 1716-147...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1957 - Jaguar XK140 | Front Inner |
- Champion Copper Plus Small Engine- Boxed - N3C
- 9 :1 Compression Ratio D -Type Head Non-Resistor Type Gap 0.025in ; Plug Type N3C
- Champion Copper Plus Small Engine 801 Spark Plug (Carton of 4)
- Copper Plus
- Product Attributes:
- Hex Size:
- 0.813
- 20.650
- Reach: 0.75
- Center Electrode Tip Material: Nickel
- Seat Type: Flat
- Electrical Terminal Type: Removable Nut
- Manufacturer Heat Range: 3
- Pre-Gap Size:
- 0.025
- 0.65
- Classification: Champion Copper Plus Small Engine
- Ground Electrode Core Material: Nickel
- Plug Type: N3c
- Hex Size:
- Dependable performance. This Champion® spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
14G1, 42XL, AG1CX, AG1X, B7ES, B7ES11, B7EV, N3C, S42XL, SF259D, SF405D, W21ESL11, W22ESU, W22ESU11, W22ESZU, W24ESU, W24ESU11, W24ESZU...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1957 - Jaguar XK140 | L | 3442 | 6 Cyl 3.4L | 210 |
- Champion Copper Plus Small Engine- Boxed - N3C
- For Racing Only Non-Resistor Type Gap 0.025in ; Plug Type N3C
- Champion Copper Plus Small Engine 801 Spark Plug (Carton of 4)
- Copper Plus
- Product Attributes:
- Hex Size:
- 0.813
- 20.650
- Reach: 0.75
- Center Electrode Tip Material: Nickel
- Seat Type: Flat
- Electrical Terminal Type: Removable Nut
- Manufacturer Heat Range: 3
- Pre-Gap Size:
- 0.025
- 0.65
- Classification: Champion Copper Plus Small Engine
- Ground Electrode Core Material: Nickel
- Plug Type: N3c
- Hex Size:
- Dependable performance. This Champion® spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
- This item must be purchased in quantities of 4
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1957 - Jaguar XKSS | L | 3442 | 6 Cyl 3.4L | 210 |
- Taper Bearing Set Includes Cup and Cone
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0009815905, 0019810905KZ, 00317-33-075, 006-311-427A, 006311427A, 0313-30-075, 0317-33-075, 051-3848, 051-4128, 051-4210, 051-4214, 051-4220, 102719A, 1073300051, 11055109, 1113300051, 1115860433, 1153300051...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1957 - Jaguar XK140 | Front Outer |
- W/40 1/8" Belt O.C.; W/3/8" Belt T.W.; W/V-Belt Drive
- High Capacity V-Belt (Standard)
- Product Attributes:
- Top Width: .41
- Belt Material: Epdm
- Notched: Yes
- Outside Circumference:
- 1037
- 40.83
- Construction: Notched
- Cross Section Designation: Hc41
- Effective Length:
- 1016
- 40
- Strand Quantity: 1
- Type: High Capacity V-belt (standard)
- Cord Material: Polyester
-
Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
- Gates Automotive XL V-Belt is a durable, long-lasting replacement V-belt designed for the most demanding engine drives. Due to thermal forces in the vehicle engine, this variable notched belt tightens on the drive as it heats up to prevent slippage, improve belt performance and reduce noise.
-
Suggested Purchase Quantity: 3
- Most jobs typically require 3 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0116000, 027022928, 027121127, 027121127Y, 03-02-320-6, 0403401, 060903137, 0822155, 0951014, 10-01585, 100871, 10477233, 1063, 10A1010, 10A1012, 10A1015, 10AV1013, 10G1015...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1957 - Jaguar Mark 1 | L | 3442 | Fan and Generator | GAS | 6 Cyl 3.4L | 210 |
- Universal Joint Greaseable 1310 Series OSR
- with 3.219in Outside Snap Ring Dimension 1.062in Bearing Cap Diameter Greaseable with 2 Piece Rear Driveshaft
- FSGR
- Product Attributes:
- Bearing Cap Type B: Osr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1310/spl22
- Bearing Cap Finish: Ground
- Mounting Hardware Included: N
- Bearing Cap Type A: Osr
- Greaseable: Y
- Bearing Cap Diameter (1): 1.062
- Grease Fitting Location: One Straight Lube Fitting In Cross
- SR(1)Brng Cap to Brng Cap(OSR): 3.219
- Type: Osr Style
- Material: Steel
- Bearing Cap Diameter A (mm): 26.975
- Bearing Cap Type: Round
- Length B (mm): 81.8
- SR(2)Brng Cap to Brng Cap(OSR): 3.219
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Bearing Cap Diameter (2): 1.062
- OEM Mfg: Spicer
- OEM Series: 1310
- Bearing Cap Diameter B (mm): 26.975
- Seal Color/Finish: Black
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 81.8
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1957 - Jaguar 3.4 | Rear Driveshaft at Support Bearing |
- Universal Joint Greaseable 1310 Series OSR
- with 3.219in Outside Snap Ring Dimension 1.062in Bearing Cap Diameter Greaseable with 2 Piece Rear Driveshaft
- FSGR
- Product Attributes:
- Bearing Cap Type B: Osr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1310/spl22
- Bearing Cap Finish: Ground
- Mounting Hardware Included: N
- Bearing Cap Type A: Osr
- Greaseable: Y
- Bearing Cap Diameter (1): 1.062
- Grease Fitting Location: One Straight Lube Fitting In Cross
- SR(1)Brng Cap to Brng Cap(OSR): 3.219
- Type: Osr Style
- Material: Steel
- Bearing Cap Diameter A (mm): 26.975
- Bearing Cap Type: Round
- Length B (mm): 81.8
- SR(2)Brng Cap to Brng Cap(OSR): 3.219
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Bearing Cap Diameter (2): 1.062
- OEM Mfg: Spicer
- OEM Series: 1310
- Bearing Cap Diameter B (mm): 26.975
- Seal Color/Finish: Black
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 81.8
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1957 - Jaguar 3.4 | Rear Driveshaft at Transmission |
- Universal Joint Greaseable 1310 Series OSR
- with 3.219in Outside Snap Ring Dimension 1.062in Bearing Cap Diameter Greaseable with 1 Piece Rear Driveshaft
- FSGR
- Product Attributes:
- Bearing Cap Type B: Osr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1310/spl22
- Bearing Cap Finish: Ground
- Mounting Hardware Included: N
- Bearing Cap Type A: Osr
- Greaseable: Y
- Bearing Cap Diameter (1): 1.062
- Grease Fitting Location: One Straight Lube Fitting In Cross
- SR(1)Brng Cap to Brng Cap(OSR): 3.219
- Type: Osr Style
- Material: Steel
- Bearing Cap Diameter A (mm): 26.975
- Bearing Cap Type: Round
- Length B (mm): 81.8
- SR(2)Brng Cap to Brng Cap(OSR): 3.219
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Bearing Cap Diameter (2): 1.062
- OEM Mfg: Spicer
- OEM Series: 1310
- Bearing Cap Diameter B (mm): 26.975
- Seal Color/Finish: Black
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 81.8
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
This Part Fits the Following OEM/Substitute Numbers:
02362830, 031468, 04371-04010, 04371-04020, 04371-0C010, 0437104010, 0437104020, 043710C010, 04723072, 051025Z1546, 051025Z3207, 055-0737, 06-06-1242, 1-0153, 1-0153G, 1-0154, 1-0200, 1-0278...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1957 - Jaguar 3.4 | Rear Driveshaft at Transmission |
- From Eng. B2917
- Product Attributes:
- Top Width: .44
- Outside Circumference:
- 1043.18
- 41.07
- Color: Black
- Banded Belt: N
- Standards: Sae J636, Sae J637
- Effective Length:
- 1028.70
- 40.50
- Belt Construction: Bottom Cog
- Minimum Operating Temperature:
- -35
- -37.2
- Material: Synthetic Rubber Compound
- Maximum Operating Temperature:
- 175
- 79.4
This Part Fits the Following OEM/Substitute Numbers:
04-00217, 1.721.408, 11 23 1 721 408, 11A1030, 13405, 13406, 13409, 13410, 141-0414, 15-405, 15-412, 15405, 15410, 15411, 15W405L, 16.97.08034, 1827369, 21X16091A...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1957 - Jaguar Mark VII | Fan and Generator |
Showing 1 - 10 of 22 products
Loading...