Image
Product
Price
- Prestone Amam Gen 2 50/50 6/1 GAL
- Extended Life 50/50, Ready to Use Prediluted
- Product Attributes:
- Flash Point:
- 104
- 220
- Biodegradable: No
- Phosphate Free: Yes
- Size: 1
- Standards: Astm D3306, D4985
- Organic Acid Technology Based: Yes
- Propylene Glycol Formulation: No
- Freezing Point:
- -34
- -37
- Recommended Dilution Ratio: No Dilution Required
- Ethylene Glycol: Yes
- Color: Yellow
- Boiling Point at 50 50 Mixture:
- 129
- 229
- 265
- Pre-Mixed Or Concentrate: 50/50
- Type: Phosphated Hybrid Oat (p-hoat)
- Flash Point:
-
Features:
- Formulated to work with All Vehicles. Works with all fluid colors
- All OAT, POAT, HOAT & IAT.
- Longer Engine Life Guarantee - 10 Yr., 300,000 mile Extended life formula.
- Includes patented Prestone CorGuard technology, the best advancement in cooling system parts protection that protects against rust and corrosion of all cooling system metals, including aluminum. Protection for 300,000 miles.
- Ready to Use formula (prediluted to a 50% Eg & 50% distilled water mix). Perfect for small volume top-off or complete drain and refill of the cooling system
- for corrosion protection for cars and light duty trucks. Top-off a vehicle’s cooling system with Prestone 50/50, which is a blend of concentrated antifreeze/coolant and demineralized water.
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 1960 - BMW 503 |
- Antifreeze/Coolant
- G05® Antifreeze/Coolant Concentrate 1 GA
- G05 Yellow Concentrate - 1 Gal.
- Product Attributes:
- Container Size: 1.0 Gallon
- Flammable: No
- Recommended Dilution Ratio: Concentrate
- Flash Point - Deg. F: > 250
- Ethylene Glycol: Yes
- Freeze Point - Deg. F: -33
- Standards: Hoat Coolant That Meets Ford Wss-m97b51-a1, Chrysler Ms 7170 And Ms 9769, Astm D3306, Cummins 90t8-4, Detroit Diesel 7se2987, Daimlerchrysler, Mtu, And John Deere.
- Pre-Mixed Or Concentrate: Concentrate
- Flash Point - Deg. C: > 121
- Freeze Point - Deg. C: -36
- Type:
- Hybrid Oat (hoat)
- Organic Acid Technology (oat)
-
Features:
- Helps protect all cooling system metals, including aluminum
- ZEREX™ G05® is the automaker approved original chemistry used in newer Ford®, Chrysler® and Mercedes-Benz® automotive and diesel engines. Its Hybrid Organic Acid Technology (HOAT) chemistry combines the best of conventional and organic acid-based chemistry to provide the ultimate protection against rust and corrosion. ZEREX G05 antifreeze/coolant uses the highest quality virgin ethylene glycol for freeze and boil over protection and a hybrid organic acid corrosion inhibitor package to protect your engines from liner pitting and corrosion.
Additional Fitment Information:
| Vehicle |
|---|
| 1960 - BMW Isetta |
- OE Coolant is Green; Verify coolant color in your radiator or owners manual; DO NOT MIX different color coolants/antifreeze OE Match
- PEAK OET European Extended Life Blue 50/50 Pre-diluted; 1 Gallon
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 1960 - BMW 507 |
- Prestone All Vehicles - 10yr/300k mi- Antifreeze+Coolant (1 Gal - Concentrate)
- Extended Life, Full Strength Concentrate
- Product Attributes:
- Flash Point:
- 104
- 220
- Biodegradable: No
- Phosphate Free: Yes
- Size: 1
- Standards: Astm D3306, D4985
- Organic Acid Technology Based: Yes
- Propylene Glycol Formulation: No
- Freezing Point:
- -34
- -37
- Recommended Dilution Ratio:
- 5 To 7
- 50:50
- Ethylene Glycol: Yes
- Color: Yellow
- Boiling Point at 50 50 Mixture:
- 129
- 229
- 265
- Pre-Mixed Or Concentrate: Concentrate
- Type: Phosphated Hybrid Oat (p-hoat)
- Flash Point:
-
Features:
- Formulated to work with All Vehicles. Works with all fluid colors
- All OAT, POAT, HOAT & IAT.
- Longer Engine Life Guarantee - 10 Yr., 300,000 mile Extended life formula
- Includes patented Prestone CorGuard technology, our best advancement in cooling system parts protection that protects against rust and corrosion of all cooling system metals, including aluminum. Protection for 300,000 miles.
- Concentrate formula. Must mix with distilled to the desired mix ratio of EG & water. Can be used for top-off, complete drain and refill or flush and refill of the cooling system.
- Prestone All Vehicles antifreeze+coolant - Concentrate is our optimized formula for All Vehicles; makes, models, years & fluid colors. Our Patented Cor-Guard® Technology (our best coolant innovation in decades) works with all new engines, and also is backward compatible - providing instant protection in older engines. Not only does Prestone Coolant Technology manage engine temperature all year round and protects against freezing, it also uniquely protects the engine from serious damage. No matter what type of coolant is currently in your engine, a Single Top-off of Patented Cor-Guard® Technology instantly protects parts better from corrosion, buildup, pitting, scaling, rust and other damage; a complete replacement of all coolant protects to the maximum. Internal engine damage can cause parts failure, resulting in expensive auto repair shop bills and downtime inconveniences. Using Prestone Antifreeze+Coolant protects against engine issues and those inconveniences. This patented fluid is designed to last 10yrs / 300,000 miles and will protect the internal parts of the engine for 10yrs / 300,000 miles
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 1960 - BMW 503 |
- Antifreeze/Coolant
- G05® Antifreeze/Coolant Ready-to-Use 1 GA
- G05 Yellow Ready-to-Use - 1 Gal.
- Product Attributes:
- Container Size: 1.0 Gallon
- Flammable: No
- Recommended Dilution Ratio: Ready To Use
- Flash Point - Deg. F: > 250
- Ethylene Glycol: Yes
- Freeze Point - Deg. F: -33
- Standards: Contains Ethylene Glycol Maximum Freezing Point -34f Degrees Minimum Boiling Point 226f Degrees
- Pre-Mixed Or Concentrate: Pre-mixed
- Flash Point - Deg. C: > 121
- Freeze Point - Deg. C: -36
- Type:
- Hybrid Oat (hoat)
- Organic Acid Technology (oat)
-
Features:
- Helps protect all cooling system metals, including aluminum
- ZEREX™ G05® is the automaker approved original chemistry used in newer Ford®, Chrysler® and Mercedes-Benz® automotive and diesel engines. Its Hybrid Organic Acid Technology (HOAT) chemistry combines the best of conventional and organic acid-based chemistry to provide the ultimate protection against rust and corrosion. ZEREX G05® antifreeze/coolant uses the highest quality virgin ethylene glycol for freeze and boil over protection and a hybrid organic acid corrosion inhibitor package to protect your engines from liner pitting and corrosion.
Additional Fitment Information:
| Vehicle |
|---|
| 1960 - BMW 503 |
- For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;CARB E.O. D-550-34
- Electric Fuel Pump; For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;
- Electric Fuel Pump
- Product Attributes:
- Maximum PSI: 3.5
- WARNING CA Proposition 65: Yes
- Fuel Type: Gasoline
- Free Flow GPH: 28
- Item Weight: 1.200 Lbs.
-
Features:
- Solid-state Worry Free Electronics
- Internal Pressure Regulating
- Universal Design Allows For Easy Installation
- No Diaphragms Or Mechanical Parts To Wear Out
- They Make An Excellent Fuel Transfer Pump
- Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flow rate is 28 gallons per hour (GPH) at 2 to 3-1/2 pounds per square inch (PSI). Universal design for most import 4 & 6-cylinder carburetor applications. Please see part #12S for V8 gasoline applications, part #12D for diesel applications or part #12E for Ethanol, Methanol, E85 and Race Fuel applications. Solid-state worry free electronics. Eliminates vapor lock and flooding. Works well as a fuel transfer, booster, or stand-alone pump. Not recommended for diesel, methanol, ethanol, E85 or race fuel applications!!
Additional Fitment Information:
| Vehicle |
|---|
| 1960 - BMW 502 |
- For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;CARB E.O. D-550-34
- Electric Fuel Pump; For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;
- Electric Fuel Pump
- Product Attributes:
- Maximum PSI: 3.5
- WARNING CA Proposition 65: Yes
- Fuel Type: Gasoline
- Free Flow GPH: 28
- Item Weight: 1.200 Lbs.
-
Features:
- Solid-state Worry Free Electronics
- Internal Pressure Regulating
- Universal Design Allows For Easy Installation
- No Diaphragms Or Mechanical Parts To Wear Out
- They Make An Excellent Fuel Transfer Pump
- Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flow rate is 28 gallons per hour (GPH) at 2 to 3-1/2 pounds per square inch (PSI). Universal design for most import 4 & 6-cylinder carburetor applications. Please see part #12S for V8 gasoline applications, part #12D for diesel applications or part #12E for Ethanol, Methanol, E85 and Race Fuel applications. Solid-state worry free electronics. Eliminates vapor lock and flooding. Works well as a fuel transfer, booster, or stand-alone pump. Not recommended for diesel, methanol, ethanol, E85 or race fuel applications!!
Additional Fitment Information:
| Vehicle |
|---|
| 1960 - BMW 501 |
- Autolite 4093 Copper Spark Plug
- Gap .025 (in); Auto
- Copper Spark Plug
- Product Attributes:
- Center Electrode Insulator Tip Projection:
- 0.039
- 0.99
- Washer Included: Yes
- Electrical Terminal Type: Removable Nut
- Grade Type: Regular
- Core Nose Length:
- 0.364
- 9.25
- Washer Type: Flat
- Ground Electrode Tip Material: Nickel
- Skirt: Yes
- Center Electrode Core Material: Copper
- Hex Type: Hex
- Resistor Type: No
- Indexed: No
- Ground Electrode Tip Design: Standard
- Pre-Gap Size:
- 0.03
- 0.76
- Ground Electrode Core Material: Nickel
- Center Electrode Projection: Short Projection
- Seat Type: Flat
- Ground Electrode Quantity: 1
- Insulator Material: Ceramic
- Hex Size: 13/16
- Reach:
- 0.5
- 12.7
- Center Electrode Tip Material: Nickel
- Skirt Length:
- 0.494
- 12.55
- Manufacturer Heat Range: 11
- Resistance: 1
- Insulator Height:
- 2.224
- 56.49
- Center Electrode Insulator Tip Projection:
-
Features:
- The copper core center electrode aids in thermal control and improves resistance to fouling.
- Its specially engineered high nickel alloy center and ground electrode provides extended life.
- The high alumina multi-rib ceramic insulator provides thermal conductivity and superior insulation for increased strength.
- Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended periods.
- Autolite® Copper spark plugs are engineered to deliver quick starts and the power your vehicle or applications needs to meet performance expectations.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
- This item must be purchased in quantities of 4
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1960 - BMW Isetta | L | 298 | 1 Cyl 0.3L | 18 |
- Autolite 4093 Copper Spark Plug
- OE Style; Auto
- Copper Spark Plug
- Product Attributes:
- Center Electrode Insulator Tip Projection:
- 0.039
- 0.99
- Washer Included: Yes
- Electrical Terminal Type: Removable Nut
- Grade Type: Regular
- Core Nose Length:
- 0.364
- 9.25
- Washer Type: Flat
- Ground Electrode Tip Material: Nickel
- Skirt: Yes
- Center Electrode Core Material: Copper
- Hex Type: Hex
- Resistor Type: No
- Indexed: No
- Ground Electrode Tip Design: Standard
- Pre-Gap Size:
- 0.03
- 0.76
- Ground Electrode Core Material: Nickel
- Center Electrode Projection: Short Projection
- Seat Type: Flat
- Ground Electrode Quantity: 1
- Insulator Material: Ceramic
- Hex Size: 13/16
- Reach:
- 0.5
- 12.7
- Center Electrode Tip Material: Nickel
- Skirt Length:
- 0.494
- 12.55
- Manufacturer Heat Range: 11
- Resistance: 1
- Insulator Height:
- 2.224
- 56.49
- Center Electrode Insulator Tip Projection:
-
Features:
- The copper core center electrode aids in thermal control and improves resistance to fouling.
- Its specially engineered high nickel alloy center and ground electrode provides extended life.
- The high alumina multi-rib ceramic insulator provides thermal conductivity and superior insulation for increased strength.
- Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended periods.
- Autolite® Copper spark plugs are engineered to deliver quick starts and the power your vehicle or applications needs to meet performance expectations.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
14 Z-4 AU, 14-7 AU, 15 Z-4 AU, 154, 4024, 704, 811, 811-1, 811M, AE2C, AE2X, B6HS, B6HS-10, B7HCS, B7HES, B7HS, B7HS-10, B7HS-10 S25...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1960 - BMW Isetta | L | 298 | 1 Cyl 0.3L | 18 |
- Autolite 4093 Copper Spark Plug
- Gap .025 (in); Auto
- Copper Spark Plug
- Product Attributes:
- Center Electrode Insulator Tip Projection:
- 0.039
- 0.99
- Washer Included: Yes
- Electrical Terminal Type: Removable Nut
- Grade Type: Regular
- Core Nose Length:
- 0.364
- 9.25
- Washer Type: Flat
- Ground Electrode Tip Material: Nickel
- Skirt: Yes
- Center Electrode Core Material: Copper
- Hex Type: Hex
- Resistor Type: No
- Indexed: No
- Ground Electrode Tip Design: Standard
- Pre-Gap Size:
- 0.03
- 0.76
- Ground Electrode Core Material: Nickel
- Center Electrode Projection: Short Projection
- Seat Type: Flat
- Ground Electrode Quantity: 1
- Insulator Material: Ceramic
- Hex Size: 13/16
- Reach:
- 0.5
- 12.7
- Center Electrode Tip Material: Nickel
- Skirt Length:
- 0.494
- 12.55
- Manufacturer Heat Range: 11
- Resistance: 1
- Insulator Height:
- 2.224
- 56.49
- Center Electrode Insulator Tip Projection:
-
Features:
- The copper core center electrode aids in thermal control and improves resistance to fouling.
- Its specially engineered high nickel alloy center and ground electrode provides extended life.
- The high alumina multi-rib ceramic insulator provides thermal conductivity and superior insulation for increased strength.
- Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended periods.
- Autolite® Copper spark plugs are engineered to deliver quick starts and the power your vehicle or applications needs to meet performance expectations.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
- This item must be purchased in quantities of 4
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1960 - BMW Isetta | H | 582 | 2 Cyl 0.6L | 36 |
Showing 1 - 10 of 26 products
Loading...