Image
Product
Price
- B8 TerraSport - Suspension Shock Absorber
- Provides 1" Rear Lift
- 46mm Monotube Shock Absorber
- B8 TerraSport
- Product Attributes:
- Boot Included: Yes
- Internal Design: Monotube
- Lower Mount Type: Eye
- Upper Mount Type: Eye
- Segment: Tuning
- Adjustable Damping: Non-adjustable
- Spring Seat Included: No
- PartType: Shocks / Struts
- Prop 65 (Y/N): Y
-
Features:
- Direct fit shocks are designed to increase ground clearance and improve off-road capabilities
- Utilizes vehicle‘s factory coil springs and OEM mounting locations, for a direct fit, easy installation
- No spacers required. Shocks lift vehicle 1-2 inches, depending on application
- Bilstein B8 TerraSport direct fit shocks are designed to increase ground clearance and improve off-road capability for CUVs. Enthusiasts will gain 1-2” of lift depending on application, allowing them to safely navigate back-country terrain, while enhancing day-to-day ride quality. Like all Bilstein products, B8 TerraSport shocks have been tested and tuned for each application, and always with the end user in mind. Whether you’re traversing your way up a snow packed summit, or loaded up with gear and looking for that epic camping spot, B8 TerraSport gives you the confidence to push further when the pavement ends, and the durability to get you back home.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2018 - Toyota RAV4 | Rear | LE |
- B8 8100 - Suspension Shock Absorber
- Fits Vehicles With 0-2" Rear Lift
- 60mm Shock Absorber
- B8 8100
- Product Attributes:
- Internal Design: Monotube
- Upper Mount Type: Stem
- Reservoir: Yes
- Segment: Light Truck
- Body Design: 60mm Id Smooth Body (non-coilover)
- Spring Seat Included: No
- PartType: Shocks / Struts
- Collapsed Length (MM): 379.5
- Boot Included: No
- Lower Mount Type: Eye 19.2mm
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 60mm
- Prop 65 (Y/N): Y
-
Features:
- Direct fit for an easy installation
- 60mm large bore digressive piston offers a greater range of tunability and delivers exceptional comfort without sacrificing control
- 60mm remote reservoir offers increased oil capacity for consistent performance over rough terrain
- Bilstein B8 8100 reservoir shock absorbers are a large bore 60mm direct fit solution for lifted trucks and SUVs. Constructed from aerospace quality billet components, the large 60mm ID shock body offers a higher oil volume capacity to control heat while tackling rough road surfaces over long distances. Each B8 8100 offers a unique remote or piggyback reservoir solution for an easy, hassle free installation. These shock absorbers feature a monotube design for consistent fade free performance and utilize velocity sensitive digressive valve settings which are tuned for each specific application. The large 60mm piston design offers more comfort and control in all driving conditions. The Bilstein B8 8100 will allow you to tame the terrain in comfort.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
25001-125, 57810P
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2018 - Toyota 4Runner | Rear | SR5 | 4WD |
- B8 8100 - Suspension Shock Absorber
- Fits Vehicles With 0.9-2" Rear Lift
- 60mm Shock Absorber
- B8 8100
- Product Attributes:
- Internal Design: Monotube
- Upper Mount Type: Stem
- Reservoir: Yes
- Segment: Light Truck
- Body Design: 60mm Id Smooth Body (non-coilover)
- Spring Seat Included: No
- PartType: Shocks / Struts
- Collapsed Length (MM): 379.5
- Boot Included: No
- Lower Mount Type: Eye 19.2mm
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 60mm
- Prop 65 (Y/N): Y
-
Features:
- Direct fit for an easy installation
- 60mm large bore digressive piston offers a greater range of tunability and delivers exceptional comfort without sacrificing control
- 60mm remote reservoir offers increased oil capacity for consistent performance over rough terrain
- Bilstein B8 8100 reservoir shock absorbers are a large bore 60mm direct fit solution for lifted trucks and SUVs. Constructed from aerospace quality billet components, the large 60mm ID shock body offers a higher oil volume capacity to control heat while tackling rough road surfaces over long distances. Each B8 8100 offers a unique remote or piggyback reservoir solution for an easy, hassle free installation. These shock absorbers feature a monotube design for consistent fade free performance and utilize velocity sensitive digressive valve settings which are tuned for each specific application. The large 60mm piston design offers more comfort and control in all driving conditions. The Bilstein B8 8100 will allow you to tame the terrain in comfort.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2018 - Toyota 4Runner | Rear | SR5 Premium | RWD |
- B8 8100 - Suspension Shock Absorber
- Fits Vehicles With 0-1.5" Rear Lift Requires wheels with maximum of 6" backspacing
- 60mm Shock Absorber
- B8 8100
- Product Attributes:
- Internal Design: Monotube
- Upper Mount Type: Stem
- Reservoir: Yes
- Segment: Light Truck
- Body Design: Smooth Body (non-coilover)
- Spring Seat Included: No
- PartType: Shocks / Struts
- Collapsed Length (MM): 397.0
- Boot Included: No
- Lower Mount Type: Eye 12.4mm
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 60mm
- Prop 65 (Y/N): Y
-
Features:
- 60mm remote reservoir offers increased oil capacity for consistent performance over rough terrain
- Direct fit for an easy installation
- 60mm large bore digressive piston offers a greater range of tunability and delivers exceptional comfort without sacrificing control
- Bilstein B8 8100 reservoir shock absorbers are a large bore 60mm direct fit solution for lifted trucks and SUVs. Constructed from aerospace quality billet components, the large 60mm ID shock body offers a higher oil volume capacity to control heat while tackling rough road surfaces over long distances. Each B8 8100 offers a unique remote or piggyback reservoir solution for an easy, hassle free installation. These shock absorbers feature a monotube design for consistent fade free performance and utilize velocity sensitive digressive valve settings which are tuned for each specific application. The large 60mm piston design offers more comfort and control in all driving conditions. The Bilstein B8 8100 will allow you to tame the terrain in comfort.
This Part Fits the Following OEM/Substitute Numbers:
25001-144, 57720P
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2018 - Toyota Tundra | Rear Right | Platinum |
- B12 (Special) - Coil Spring Set
- Provides 2" Rear Lift Heavy Load PKG; 400 lb Constant Weight
- Rear Suspension Kit
- B12 (Special)
- Product Attributes:
- Segment: Light Truck
- PartType: Suspension Kit
- Prop 65 (Y/N): Y
-
Features:
- Utilizing various different technologies to achieve the optimum ride height for a specific requirement
- Provide the perfect combination of suspension dynamics, quality and aesthetics
- Designed to alter the vehicles ride height for optimum performance
- Bilstein B12 (Special) suspension kits are designed to alter the vehicles ride height for optimum performance. Utilizing various different technologies to achieve the optimum ride height for a specific requirement. Bilstein B12 (Special) suspension kits provide the perfect combination of suspension dynamics, quality and aesthetics.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2018 - Toyota 4Runner | Rear | SR5 Premium | RWD |
- B12 (Special) - Coil Spring Set
- Provides 1.5" Rear Lift Heavy Load PKG; 400 lb Constant Weight
- Rear Suspension Kit
- B12 (Special)
- Product Attributes:
- Segment: Light Truck
- PartType: Suspension Kit
- Prop 65 (Y/N): Y
-
Features:
- Utilizing various different technologies to achieve the optimum ride height for a specific requirement
- Provide the perfect combination of suspension dynamics, quality and aesthetics
- Designed to alter the vehicles ride height for optimum performance
- Bilstein B12 (Special) suspension kits are designed to alter the vehicles ride height for optimum performance. Utilizing various different technologies to achieve the optimum ride height for a specific requirement. Bilstein B12 (Special) suspension kits provide the perfect combination of suspension dynamics, quality and aesthetics.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2018 - Toyota 4Runner | Rear | SR5 | 4WD |
- B8 5100 (Ride Height Adjustable) - Suspension Shock Absorber
- Provides 0-2" Front Lift
- 46mm Monotube Shock Absorber
- B8 5100 (Ride Height Adjustable)
- Product Attributes:
- Internal Design: Monotube
- Upper Mount Type: Stem
- Reservoir: No
- Segment: Light Truck
- Body Design: Snap Ring Grooved Body (coilover)
- Spring Seat Included: Yes
- PartType: Shocks / Struts
- Collapsed Length (MM): 446.5
- Boot Included: Black Straight
- Lower Mount Type: Eye 14.2mm
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 46mm
- Prop 65 (Y/N): Y
-
Features:
- Adjustable spring seat offers 0-2.75in of lift, depending on the application
- Practical alternative to coil spring spacers, with the benefit of Bilstein monotube technology
- 46mm monotube design ensures consistent, fade-free performance in all conditions
- Bilstein B8 5100 (Ride Height Adjustable) shock absorbers are designed for trucks and SUVs with a front OE coilover style suspension. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-3 inches of front lift with OE springs (depending on application). The monotube shock absorbers feature a 46mm digressive piston a with self-adjusting deflective disc valve setting. Bilstein B8 5100 (Ride Height Adjustable) shock absorbers provide increased wheel travel and improved handling. Utilizing a B8 5100 (Ride Height Adjustable) shock absorber is the easiest way to level out your vehicle.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
985-62-000, RS77777
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2018 - Toyota Tacoma | Front | Limited |
- B8 8100 - Suspension Shock Absorber
- Fits Vehicles With 0-1.5" Rear Lift Requires wheels with maximum of 6" backspacing
- 60mm Shock Absorber
- B8 8100
- Product Attributes:
- Internal Design: Monotube
- Upper Mount Type: Stem
- Reservoir: Yes
- Segment: Light Truck
- Body Design: Smooth Body (non-coilover)
- Spring Seat Included: No
- PartType: Shocks / Struts
- Collapsed Length (MM): 397.0
- Boot Included: No
- Lower Mount Type: Eye 12.4mm
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 60mm
- Prop 65 (Y/N): Y
-
Features:
- 60mm large bore digressive piston offers a greater range of tunability and delivers exceptional comfort without sacrificing control
- 60mm remote reservoir offers increased oil capacity for consistent performance over rough terrain
- Direct fit for an easy installation
- Bilstein B8 8100 reservoir shock absorbers are a large bore 60mm direct fit solution for lifted trucks and SUVs. Constructed from aerospace quality billet components, the large 60mm ID shock body offers a higher oil volume capacity to control heat while tackling rough road surfaces over long distances. Each B8 8100 offers a unique remote or piggyback reservoir solution for an easy, hassle free installation. These shock absorbers feature a monotube design for consistent fade free performance and utilize velocity sensitive digressive valve settings which are tuned for each specific application. The large 60mm piston design offers more comfort and control in all driving conditions. The Bilstein B8 8100 will allow you to tame the terrain in comfort.
This Part Fits the Following OEM/Substitute Numbers:
25001-144, 57720P
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2018 - Toyota Tundra | Rear Left | Platinum |
- B8 5100 - Suspension Shock Absorber
- Fits Vehicles With 4" Rear Lift
- 46mm Monotube Shock Absorber
- B8 5100
- Product Attributes:
- Internal Design: Monotube
- Upper Mount Type: Stem
- Reservoir: No
- Segment: Light Truck
- Body Design: Smooth Body (non-coilover)
- Spring Seat Included: No
- PartType: Shocks / Struts
- Collapsed Length (MM): 418.5
- Boot Included: Black Bellows
- Lower Mount Type: Eye 12mm
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 46mm
- Prop 65 (Y/N): Y
-
Features:
- Vehicle specific tuning
- 46mm monotube design ensures consistent, fade-free performance in all conditions
- Patented digressive valving instantly reacts to changing surface conditions
- Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
985-24-196, RS77319
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2018 - Toyota Tacoma | Rear | Limited |
- B12 (Special) - Coil Spring Set
- Provides 1" Rear Lift
- Rear Suspension Kit
- B12 (Special)
- Product Attributes:
- Segment: Light Truck
- PartType: Suspension Kit
- Prop 65 (Y/N): Y
-
Features:
- Utilizing various different technologies to achieve the optimum ride height for a specific requirement
- Provide the perfect combination of suspension dynamics, quality and aesthetics
- Designed to alter the vehicles ride height for optimum performance
- Bilstein B12 (Special) suspension kits are designed to alter the vehicles ride height for optimum performance. Utilizing various different technologies to achieve the optimum ride height for a specific requirement. Bilstein B12 (Special) suspension kits provide the perfect combination of suspension dynamics, quality and aesthetics.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2018 - Toyota 4Runner | Rear | SR5 | 4WD |
Showing 1 - 10 of 82 products
Loading...