Shop By Product Matching "Body"
Choose a Model for your 1998 Chevrolet
Image
Product
Price
- Class 3 Hitch; 2in.; Select S10; S15; Sonoma; Hombre (Concealed Main Body)
- 4000lbs. Gross Trailer Weight; 400lbs. Tongue Weight; 6000lbs. Weight Distributing; 600lbs. Weight Distributing Tongue Weight Square Main Body~No Drilling Required~Visibility: Concealed~Install Time 45 Minutes
- CURT 13021 Class 3 Trailer Hitch; 2-In Receiver; Concealed Main Body; Fits Select Chevrolet S10; GMC S15; Sonoma; Isuzu Hombre
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 4000 Lbs.
- Visibility: Concealed
- Weight Carrying Capacity: 4000
- Body Shape: Square
- WD Tongue Weight: 600
- Install Time: 45 Minutes
- WC Tongue Weight: 400
- Weight Distribution: 6000
- Receiver Tube Size: 2.000 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Chevy S10, GMC S15, GMC Sonoma and Isuzu Hombre (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 4,000 lbs. GTW and 400 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 6,000 lbs. WD and 600 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1998 - Chevrolet S10 | - | - | Rear | - Cyl -L | - |
- Body Mount Kit Radiator Support
- Radiator Support
- Product Attributes:
- Mounting Hardware Included:
- Oui
- Sí
- Yes
- Color:
- Black
- Negro
- Noir
- Contenidos del paquete: Buje Inferior, Buje Superior, Perno, Tuerca, Retenedor
- Material:
- Caucho
- Élastomère
- Rubber
- Mounting Hardware Included:
-
Features:
- Direct replacement - this body mount fits and functions like the original equipment mount
- Quality construction - manufactured from premium materials for a long service life
- Excellent value - original equipment quality at a lower price
- Quality tested - has undergone testing to ensure proper fit and performance
- Don't let worn body mounts ruin your vehicle's comfortable ride. This body mount includes all the hardware required for an easy replacement. Made with quality materials for a long service life, this vehicle-specific design is a perfect fit.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
11515744, 15548599, 15548600, 15548815, 15548816, 15548817, 15597629, 15712445
Additional Fitment Information:
| Vehicle |
|---|
| 1998 - Chevrolet Tahoe |
- Body Mount Kit Rear
- Body Position 3
- Product Attributes:
- Bolt Grade:
- Clase 10.9
- Class 10.9
- Grade Type: Regular
- Mounting Hardware Included:
- Oui
- Sí
- Yes
- Color:
- Black
- Negro
- Noir
- Contenidos del paquete:
- Buje Inferior
- Buje Superior
- Perno
- Retenes Inferior Y Superior
- Bolt Length: 87
- Material:
- Caucho
- Élastomère
- Rubber
- Bolt Grade:
-
Features:
- Direct replacement - this body mount fits and functions like the original equipment mount
- Quality construction - manufactured from premium materials for a long service life
- Excellent value - original equipment quality at a lower price
- Quality tested - has undergone testing to ensure proper fit and performance
- Don't let worn body mounts ruin your vehicle's comfortable ride. This body mount includes all the hardware required for an easy replacement. Made with quality materials for a long service life, this vehicle-specific design is a perfect fit.
This Part Fits the Following OEM/Substitute Numbers:
15183802, 15595054, 15677731, 15688319
Additional Fitment Information:
| Vehicle |
|---|
| 1998 - Chevrolet Astro |
- Small I.D. Heater Hose
- Product Attributes:
- : .38
- Centerline Length: 12.50
- End 1 Inside Diameter: .38
- Type: Single
This Part Fits the Following OEM/Substitute Numbers:
10031, 14056-30R60, 14056-V5007, 16002M, 16264-76040, 18031, 303001, 4364, 63101, D87001
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1998 - Chevrolet Camaro | V | - | Pipe To Throttle Body | 8 Cyl 5.7L | 350 |
- Fuel Injection Throttle Body Mounting Gasket
- FEL-PRO 61027 Fuel Injection Throttle Body Mounting Gasket for Chevrolet Camaro
- Product Attributes:
- Grade Type: Premium
-
Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
This Part Fits the Following OEM/Substitute Numbers:
24503432, 35445, 711439400, 831575, G31275, G31596
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1998 - Chevrolet Camaro | V | 3800 | 6 Cyl 3.8L | 231 |
- 96-06 CHEVROLET/GMC TRUCK, S10/ S15, BLAZER/JIMMY 4.3L- TORQUE-CURVE MPFI Spacer
- E.O. Number: D578-1 Emissions Notes: 50 State Legal (street legal) spacer per vehicle listing on C.A.R.B. EO D578-1
- 1996-2006 CHEVROLET/GMC Pick-Up Truck, S10 and S15, Blazer and Jimmy, Sonoma with 4.3L V6 VORTEC Engine- Cast Aluminum TORQUE-CURVE MPFI Spacer
- Product Attributes:
- E.O. #: Yes
- Mounting Hardware Included: Yes
- Bolt Hole Quantity: 3
- Performance: Yes
- Plenum Style: Proprietary Port Design
- Spacer Finish: Burnished
- Spacer Material: Cast Aluminum
- Emissions Notes: C.a.r.b. E.o. #d-578-1; 50 State Legal. Click Here To View Covered Vehicles.
- Materials: Cast Aluminum
- Material: Cast Aluminum
- Finish: Burnished
Additional Fitment Information:
| Vehicle | Block | CC | Region | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1998 - Chevrolet S10 | V | - | United States | GAS | 6 Cyl 4.3L | 262 |
- Body Cab Mount Set
- Body Cab Mount Set; Red; Performance Polyurethane;
- Red; Performance Polyurethane
- Product Attributes:
- Prop 65 Warning Label: P65.png
- Prop 65 (C, R or CR): Cr
-
Features:
- Assures Longer Lasting Cab To Bed Alignment
- Replace To Restore Ride Height
- Gain Durability
- Stronger Than Original Rubber Mounts
- Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off. And aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy's specially formulated Hyper-Flex(TM) polyurethane cab and body mounts combine the best qualities of both: they're soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them - for added durability and when the application requires it.
Additional Fitment Information:
| Vehicle | Body |
|---|---|
| 1998 - Chevrolet K2500 | Standard Cab Pickup |
- Body mount - bushing
- Standard Cab
- Whiteline Chevy Body Mount Bushings Kit - Standard Cab
- Body Mount Bushing Kit - Standard Cab
-
Features:
- Designed with the installer in mind by reducing the need of specialised skills, tools and equipment.
- Install guide included providing detailed instructions on how to install your new purchase .
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Specially bonded design for optimised strength typically required in high load bearing applications.
- Whiteline formulation technology boasts resistance to oil, grease, ozone and weathering.
- Whiteline's body mounts replace those worn OE body mounts with a bushing that will last. Reduce the risk of body movement and alignment.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 1998 - Chevrolet C2500 | Cheyenne |
- Class 3 Hitch; 2in.; Select Chevrolet S10; GMC S15; Sonoma (Exposed Main Body)
- 4000lbs. Gross Trailer Weight; 400lbs. Tongue Weight; 6000lbs. Weight Distributing; 600lbs. Weight Distributing Tongue Weight Round Main Body~No Drilling Required~Visibility: Exposed~Install Time 45 Minutes
- CURT 13132 Class 3 Trailer Hitch; 2-Inch Receiver; Exposed Main Body; Fits Select Chevrolet S10; GMC S15; Sonoma
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 4000 Lbs.
- Visibility: Exposed
- Weight Carrying Capacity: 4000
- WD Tongue Weight: 600
- Install Time: 45 Minutes
- WC Tongue Weight: 400
- Weight Distribution: 6000
- Receiver Tube Size: 2.000 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Constructed w/A Sleek Round-Tube Main Body
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Made in USA [may include imported hardware]
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Chevy S10, GMC S15 and GMC Sonoma (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 4,000 lbs. GTW and 400 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 6,000 lbs. WD and 600 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1998 - Chevrolet S10 | - | - | Rear | - Cyl -L | - |
- Body mount - bushing
- Whiteline Body Mount Bushings Kit - Extra Cab
- Body Mount Bushing Set - Extra Cab
-
Features:
- Specially bonded design for optimised strength typically required in high load bearing applications.
- Whiteline formulation technology boasts resistance to oil, grease, ozone and weathering.
- Designed with the installer in mind by reducing the need of specialised skills, tools and equipment.
- Install guide included providing detailed instructions on how to install your new purchase .
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Whiteline's body mounts replace those worn OE body mounts with a bushing that will last. Reduce the risk of body movement and alignment.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 1998 - Chevrolet K1500 | Silverado |
Showing 1 - 10 of 53 products
Loading...