Shop By Product Matching "Body"
Choose a Model for your 1999 Chevrolet
Image
Product
Price
- Class 3 Hitch; 2in.; Select S10; S15; Sonoma; Hombre (Concealed Main Body)
- 4000lbs. Gross Trailer Weight; 400lbs. Tongue Weight; 6000lbs. Weight Distributing; 600lbs. Weight Distributing Tongue Weight Square Main Body~No Drilling Required~Visibility: Concealed~Install Time 45 Minutes
- CURT 13021 Class 3 Trailer Hitch; 2-In Receiver; Concealed Main Body; Fits Select Chevrolet S10; GMC S15; Sonoma; Isuzu Hombre
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 4000 Lbs.
- Visibility: Concealed
- Weight Carrying Capacity: 4000
- Body Shape: Square
- WD Tongue Weight: 600
- Install Time: 45 Minutes
- WC Tongue Weight: 400
- Weight Distribution: 6000
- Receiver Tube Size: 2.000 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Chevy S10, GMC S15, GMC Sonoma and Isuzu Hombre (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 4,000 lbs. GTW and 400 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 6,000 lbs. WD and 600 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1999 - Chevrolet S10 | - | - | Rear | - Cyl -L | - |
- Body Mount Kit Radiator Support
- Radiator Support
- Product Attributes:
- Mounting Hardware Included:
- Oui
- Sí
- Yes
- Color:
- Black
- Negro
- Noir
- Contenidos del paquete: Buje Inferior, Buje Superior, Perno, Tuerca, Retenedor
- Material:
- Caucho
- Élastomère
- Rubber
- Mounting Hardware Included:
-
Features:
- Direct replacement - this body mount fits and functions like the original equipment mount
- Quality construction - manufactured from premium materials for a long service life
- Excellent value - original equipment quality at a lower price
- Quality tested - has undergone testing to ensure proper fit and performance
- Don't let worn body mounts ruin your vehicle's comfortable ride. This body mount includes all the hardware required for an easy replacement. Made with quality materials for a long service life, this vehicle-specific design is a perfect fit.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
11515744, 15548599, 15548600, 15548815, 15548816, 15548817, 15597629, 15712445
Additional Fitment Information:
| Vehicle |
|---|
| 1999 - Chevrolet Tahoe |
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 123
- 4.83
- End 1 Inside Diameter:
- .25
- 6
- Material: Epdm
- End 2 Inside Diameter:
- .25
- 6
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
This Part Fits the Following OEM/Substitute Numbers:
10623, 12570528, 14754S, 18623, 86504, B86504
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1999 - Chevrolet Silverado 1500 | V | - | Throttle Body To Engine | GAS | 8 Cyl 4.8L | 294 |
- 99-07 Chevy/GMC 1500-3500 Truck/SUV;4.8L,5.3L,6.0L,8.1- TORQUE-CURVE MPFI Spacer
- E.O. Number: D578-1 Emissions Notes: 50 State Legal (street legal) spacer per vehicle listing on C.A.R.B. EO D578-1
- 1999-07 Chevy/GMC 1500-3500 Trucks/SUVs, Cadillac Escalade, Hummer H2, or Motorhome with 4.8L, 5.3L, 6.0L or 8.1L VORTEC Engine ('07 Classic Models Only)- Cast Aluminum TORQUE-CURVE MPFI Spacer
- Product Attributes:
- E.O. #: Yes
- Mounting Hardware Included: Yes
- Bolt Hole Quantity: 3
- Performance: Yes
- Plenum Style: Proprietary Port Design
- Finish: Burnished
- Installation Notes: Hummer H2 Vehicles Require #2599 Fan Spacer. Sold Separately
- Spacer Finish: Burnished
- Spacer Material: Cast Aluminum
- Emissions Notes: C.a.r.b. E.o. #d-578-1; 50 State Legal. Click Here To View Covered Vehicles.
- Materials: Cast Aluminum
- Material: Cast Aluminum
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | Engine Version | CID |
|---|---|---|---|---|---|---|
| 1999 - Chevrolet Silverado 1500 | V | 5328 | United States | 8 Cyl 5.3L | Vortec | 325 |
- 96-06 CHEVROLET/GMC TRUCK, S10/ S15, BLAZER/JIMMY 4.3L- TORQUE-CURVE MPFI Spacer
- E.O. Number: D578-1 Emissions Notes: 50 State Legal (street legal) spacer per vehicle listing on C.A.R.B. EO D578-1
- 1996-2006 CHEVROLET/GMC Pick-Up Truck, S10 and S15, Blazer and Jimmy, Sonoma with 4.3L V6 VORTEC Engine- Cast Aluminum TORQUE-CURVE MPFI Spacer
- Product Attributes:
- E.O. #: Yes
- Mounting Hardware Included: Yes
- Bolt Hole Quantity: 3
- Performance: Yes
- Plenum Style: Proprietary Port Design
- Spacer Finish: Burnished
- Spacer Material: Cast Aluminum
- Emissions Notes: C.a.r.b. E.o. #d-578-1; 50 State Legal. Click Here To View Covered Vehicles.
- Materials: Cast Aluminum
- Material: Cast Aluminum
- Finish: Burnished
Additional Fitment Information:
| Vehicle | Block | CC | Region | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1999 - Chevrolet S10 | V | - | United States | GAS | 6 Cyl 4.3L | 262 |
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 35.78
- 909
- End 1 Inside Diameter:
- .23
- 6
- Material: Epdm
- End 2 Inside Diameter: .3
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
This Part Fits the Following OEM/Substitute Numbers:
10126, 15020224, 15041308, 15190788, 15274729, 15788670, 18126, 18206L, 22717008, 22733960, 22742965, 22827734, 25803110, 25976471, 64113, 64413, 86836, E86836...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1999 - Chevrolet Silverado 1500 | V | 5328 | Radiator To Throttle Body | GAS | 8 Cyl 5.3L | 325 |
- Body Cab Mount Set
- Body Cab Mount Set; Red; Performance Polyurethane;
- Red; Performance Polyurethane
- Product Attributes:
- Prop 65 Warning Label: P65.png
- Prop 65 (C, R or CR): Cr
-
Features:
- Assures Longer Lasting Cab To Bed Alignment
- Replace To Restore Ride Height
- Gain Durability
- Stronger Than Original Rubber Mounts
- Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off. And aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy's specially formulated Hyper-Flex(TM) polyurethane cab and body mounts combine the best qualities of both: they're soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them - for added durability and when the application requires it.
Additional Fitment Information:
| Vehicle | Body |
|---|---|
| 1999 - Chevrolet C2500 | Standard Cab Pickup |
- Body Cab Mount Set
- Only fits frames with 52mm mounting holes
- Body Cab Mount Set; Black; Performance Polyurethane;
- Black; Performance Polyurethane
- Product Attributes:
- Prop 65 Warning Label: P65.png
- Prop 65 (C, R or CR): Cr
-
Features:
- Assures Longer Lasting Cab To Bed Alignment
- Replace To Restore Ride Height
- Gain Durability
- Stronger Than Original Rubber Mounts
- Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off. And aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy's specially formulated Hyper-Flex(TM) polyurethane cab and body mounts combine the best qualities of both: they're soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them - for added durability and when the application requires it.
Additional Fitment Information:
| Vehicle |
|---|
| 1999 - Chevrolet Silverado 1500 |
- Class 3 Hitch; 2in.; Select Chevrolet S10; GMC S15; Sonoma (Exposed Main Body)
- 4000lbs. Gross Trailer Weight; 400lbs. Tongue Weight; 6000lbs. Weight Distributing; 600lbs. Weight Distributing Tongue Weight Round Main Body~No Drilling Required~Visibility: Exposed~Install Time 45 Minutes
- CURT 13132 Class 3 Trailer Hitch; 2-Inch Receiver; Exposed Main Body; Fits Select Chevrolet S10; GMC S15; Sonoma
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 4000 Lbs.
- Visibility: Exposed
- Weight Carrying Capacity: 4000
- WD Tongue Weight: 600
- Install Time: 45 Minutes
- WC Tongue Weight: 400
- Weight Distribution: 6000
- Receiver Tube Size: 2.000 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Constructed w/A Sleek Round-Tube Main Body
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Made in USA [may include imported hardware]
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Chevy S10, GMC S15 and GMC Sonoma (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 4,000 lbs. GTW and 400 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 6,000 lbs. WD and 600 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1999 - Chevrolet S10 | - | - | Rear | - Cyl -L | - |
- Body Mount Kit Rear
- Body Position 3
- Product Attributes:
- Bolt Grade:
- Clase 10.9
- Class 10.9
- Grade Type: Regular
- Mounting Hardware Included:
- Oui
- Sí
- Yes
- Color:
- Black
- Negro
- Noir
- Contenidos del paquete:
- Buje Inferior
- Buje Superior
- Perno
- Retenes Inferior Y Superior
- Bolt Length: 87
- Material:
- Caucho
- Élastomère
- Rubber
- Bolt Grade:
-
Features:
- Direct replacement - this body mount fits and functions like the original equipment mount
- Quality construction - manufactured from premium materials for a long service life
- Excellent value - original equipment quality at a lower price
- Quality tested - has undergone testing to ensure proper fit and performance
- Don't let worn body mounts ruin your vehicle's comfortable ride. This body mount includes all the hardware required for an easy replacement. Made with quality materials for a long service life, this vehicle-specific design is a perfect fit.
This Part Fits the Following OEM/Substitute Numbers:
15183802, 15595054, 15677731, 15688319
Additional Fitment Information:
| Vehicle |
|---|
| 1999 - Chevrolet Astro |
Showing 1 - 10 of 84 products
Loading...