Image
Product
Price
- Body Mount Set
- Body Mount Set; Black;
- Black
- Product Attributes:
- Prop 65 Warning Label: P65.png
- Prop 65 (C, R or CR): Cr
-
Features:
- Replace To Restore Ride Height
- Gain Durability
- Stronger Than Original Rubber Mounts
- Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off! And aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy's specially formulated Hyper-Flex(TM) polyurethane cab and body mounts combine the best qualities of both: they're soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them - for added durability and when the application requires it.
Additional Fitment Information:
| Vehicle |
|---|
| 2003 - Toyota 4Runner |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Production: -08/2002
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Body | Drive Type | CID | Prod. Date Range |
|---|---|---|---|---|---|---|---|
| 2003 - Toyota Tacoma | V | 3378 | 6 Cyl 3.4L | Extended Cab Pickup | 4WD | - | To:08-00-02 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Body | Drive Type | CID |
|---|---|---|---|---|---|---|---|
| 2003 - Toyota Tacoma | V | 3378 | 6 Cyl 3.4L | DLX | Extended Cab Pickup | RWD | - |
Additional Fitment Information:
| Vehicle |
|---|
| 2003 - Toyota Prius |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle |
|---|
| 2003 - Toyota RAV4 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2003 - Toyota Solara | V | 2995 | 6 Cyl 3.0L | - |
- Remanufactured
- with Motor - Relearn procedure may need to be performed upon installation of unit. Please refer to the service manual for vehicle specific instructions.
- with Motor
Additional Fitment Information:
| Vehicle |
|---|
| 2003 - Toyota Sequoia |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Body | CID |
|---|---|---|---|---|---|
| 2003 - Toyota Tacoma | L | 2694 | 4 Cyl 2.7L | Crew Cab Pickup | - |
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 244
- 9.6
- End 1 Inside Diameter: .31
- Material: Epdm
- End 2 Inside Diameter: .31
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2003 - Toyota Sienna | V | 2995 | Pipe-1 To Throttle Body | GAS | 6 Cyl 3.0L | - |
- Cut to fit
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 244
- 9.6
- End 1 Inside Diameter: .31
- Material: Epdm
- End 2 Inside Diameter: .31
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0935270131600, 10020, 10036781, 12637185, 14001S, 1405557Y12, 14055D4200, 140560B000, 140560B001, 140560S310, 1405610V11, 1405630P21, 1405630P24, 1405630R16, 1405640F04, 1405640F12, 1405653J07, 1405653J09...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2003 - Toyota Tacoma | V | 3378 | Pipe-1 To Throttle Body | GAS | 6 Cyl 3.4L | - |
Showing 1 - 10 of 52 products
Loading...