Image
Product
Price
- M6 x 1 Snap-In
- Nut; M6 x 1 Snap-In Nut;
- Nut
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Nut
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle |
|---|
| 2005 - Dodge Ram 2500 |
- 1 in.; Cast Iron; E-Coated; Non Tapered
- Lift Blocks; 1 in.; Cast Iron; E-Coated; Non Tapered;
- Lift Blocks
- Product Attributes:
- Lift/Drop Height: 1 In.
-
Features:
- 100 Percent Bolt On Installation
- Ductile Iron Construction
- Increased Ground Clearance
- Lift Blocks; 1 in.; Cast Iron; E-Coated; Non Tapered
Additional Fitment Information:
| Vehicle |
|---|
| 2005 - Dodge Ram 1500 |
- 1 in.; Cast Iron; E-Coated; Non Tapered
- Lift Blocks; 1 in.; Cast Iron; E-Coated; Non Tapered;
- Lift Blocks
- Product Attributes:
- Lift/Drop Height: 1 In.
-
Features:
- 100 Percent Bolt On Installation
- Ductile Iron Construction
- Increased Ground Clearance
- Lift Blocks; 1 in.; Cast Iron; E-Coated; Non Tapered
Additional Fitment Information:
| Vehicle |
|---|
| 2005 - Dodge Ram 1500 |
- 2 in. Drop; 5 in. Rear Drop; Includes Coils/Rear Coils/Flip Kit/And Rear Shocks;w/2 in. Drop And Rear w/5 in. Drop
- Lowering Kit; 2 in. Front Drop; 5 in. Rear Drop; Includes Front Coils/Rear Coils/Flip Kit/Front And Rear Shocks;
- Lowering Kit
-
Features:
- Built In Pinion Correction
- Complete With U Bolt Hardware
- Universal Application
- Our 2/4 drop is a great way to lower and level out your vehicle without breaking the budget. This budget friendly kit comes with a 2-inch lowering coil springs and shocks for the front. We then drop the rear comes with a 5 inch flip kit and rear twin tube shocks for a better ride. What makes this kit great is you can always add or remove components to get the look you're after.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | Drive Type | CID |
|---|---|---|---|---|---|---|---|
| 2005 - Dodge Ram 1500 | V | - | Front and Rear | 8 Cyl 4.7L | SLT | RWD | 287 |
- Rear; 4.5 in. Lift;w/4 - 4.5 in. Lift;
- 2.0 Fox Aluminum Body High Performance Shock; Rear; 4.5 in. Lift;
- 2.0 Fox Aluminum Body High Performance Shock
- Product Attributes:
- Collapsed Length: N/a
- Shock Stroke: N/a
- Extended Length: N/a
-
Features:
- Shock
- 2.0 Fox Aluminum Body High Performance Shock; Rear; 4.5 in. Lift
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2005 - Dodge Ram 1500 | Rear | Laramie | RWD |
- Rear; 4.5 in. Lift;w/4 - 4.5 in. Lift;
- 2.0 Fox Aluminum Body High Performance Shock; Rear; 4.5 in. Lift;
- 2.0 Fox Aluminum Body High Performance Shock
- Product Attributes:
- Collapsed Length: N/a
- Shock Stroke: N/a
- Extended Length: N/a
-
Features:
- Shock
- 2.0 Fox Aluminum Body High Performance Shock; Rear; 4.5 in. Lift
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2005 - Dodge Ram 1500 | Rear | ST | RWD |
- 2 in. Drop; 5 in. Rear Drop; Includes Coils/Rear Coils/Flip Kit/And Rear Shocks;w/2 in. Drop And Rear w/5 in. Drop
- Lowering Kit; 2 in. Front Drop; 5 in. Rear Drop; Includes Front Coils/Rear Coils/Flip Kit/Front And Rear Shocks;
- Lowering Kit
-
Features:
- Built In Pinion Correction
- Complete With U Bolt Hardware
- Universal Application
- Our 2/4 drop is a great way to lower and level out your vehicle without breaking the budget. This budget friendly kit comes with a 2-inch lowering coil springs and shocks for the front. We then drop the rear comes with a 5 inch flip kit and rear twin tube shocks for a better ride. What makes this kit great is you can always add or remove components to get the look you're after.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | Drive Type | CID |
|---|---|---|---|---|---|---|---|
| 2005 - Dodge Ram 1500 | V | - | Front and Rear | 8 Cyl 5.7L | Laramie | RWD | 345 |
- 3 in.; Fabricated Steel; Tapered; Powder Coated Grey
- Lift Blocks; 3 in.; Fabricated Steel; Tapered; Powder Coated Grey;
- Lift Blocks
- Product Attributes:
- Lift/Drop Height: 3 In.
-
Features:
- Made In The USA
- Fabricated Steel Blocks
- Powder Coated For A Long Life
- Angled For Pinion Correction
- Lift Blocks; 3 in.; Fabricated Steel; Tapered; Powder Coated Grey
Additional Fitment Information:
| Vehicle |
|---|
| 2005 - Dodge Ram 1500 |
- 3 in.; Fabricated Steel; Tapered; Powder Coated Grey
- Lift Blocks; 3 in.; Fabricated Steel; Tapered; Powder Coated Grey;
- Lift Blocks
- Product Attributes:
- Lift/Drop Height: 3 In.
-
Features:
- Made In The USA
- Fabricated Steel Blocks
- Powder Coated For A Long Life
- Angled For Pinion Correction
- Lift Blocks; 3 in.; Fabricated Steel; Tapered; Powder Coated Grey
Additional Fitment Information:
| Vehicle |
|---|
| 2005 - Dodge Ram 1500 |
- Class 3 Trailer Hitch; 2in. Receiver; Select Dodge Dakota (Exposed Main Body)
- 5000lbs. Gross Trailer Weight; 500lbs. Tongue Weight; 8000lbs. Weight Distributing; 800lbs. Weight Distributing Tongue Weight Square Main Body~No Drilling Required~Visibility: Exposed~Install Time 30 Minutes
- CURT 13230 Class 3 Trailer Hitch; 2-Inch Receiver; Exposed Main Body; Fits Select Dodge Dakota
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 5000 Lbs.
- Visibility: Exposed
- Weight Carrying Capacity: 5000
- Body Shape: Square
- WARNING CA Proposition 65: No
- WD Tongue Weight: 800
- Drilling Required: No
- Install Time: 30 Minutes
- WC Tongue Weight: 500
- Weight Distribution: 8000
- Receiver Tube Size: 2.000 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Dodge Dakota (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 5,000 lbs. GTW and 500 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 8,000 lbs. WD and 800 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2005 - Dodge Dakota | V | - | Rear | 6 Cyl 3.7L | 226 |
Showing 1 - 10 of 85 products
Loading...